If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Drivers for this camera?
This camera
http://www.argos.co.uk/webapp/wcs/st...roductId=61375 No idea of its make, model, etc. No label or sticker on the camera. It is also nameless. The box was thrown away. Anyone knows what make this is? And is there any Windows XP drivers for this camera? Obviously, I need to know the model of this camera before searching for the correct drivers. Thanks, -- - Tony Sutton - http://www.hyperboard.co.uk - The Biggest Message Board! ------------------------------------------------------------- Eau Contrai the perfume for the perverse. ------------------------------------------------------------- |
#2
|
|||
|
|||
yep thats a smart cam.....
i did the same too and threw away the box.... and lost the stupid cd too i sent my niece the second cam i the box and the cd with it... shes on holiday so im waiting till she comes back to get the drivers from her.... good cams too i rememebr.. anyway if yu get a driver in the meantime.....post it here.. if i get one ill post it on here too... finding a driver online has been a problem as the smartcam drivers i have downloaded dont work... thing is this cam is installed on my upstairs pc but wont allow me to use those drivers for this pc (yes ive tried everything) but i am working on getting the drivers for this camera so in reality its only a matter of time....i hope let me know how yu get on...... regards slayer "Tony Sutton" wrote in message ... This camera http://www.argos.co.uk/webapp/wcs/st...y?storeId=1000 1&langId=-1&catalogId=1001&productId=61375 No idea of its make, model, etc. No label or sticker on the camera. It is also nameless. The box was thrown away. Anyone knows what make this is? And is there any Windows XP drivers for this camera? Obviously, I need to know the model of this camera before searching for the correct drivers. Thanks, -- - Tony Sutton - http://www.hyperboard.co.uk - The Biggest Message Board! ------------------------------------------------------------- Eau Contrai the perfume for the perverse. ------------------------------------------------------------- |
#3
|
|||
|
|||
"SlAyEr" wrote in message
... i sent my niece the second cam i the box and the cd with it... shes on holiday so im waiting till she comes back to get the drivers from her.... You're the only hope I have as I'm having no luck with finding the drivers. When you do get it, send it to my e-mail addrress (mind the spamtrap), as you can't post it in here as this is not a binary newsgroup. Cheers. -- - Tony Sutton - http://www.hyperboard.co.uk - The Biggest Message Board! ------------------------------------------------------------- Air conditioned environment - Do NOT open Windows! ------------------------------------------------------------- |
#4
|
|||
|
|||
as for whether this is a binaries ng or not doenst alter my descision to
post the above files.... as far as i can see if one isnt spamming one can do what one likes,,,, and i tend to do what i like..... anyway the girl aint back off holiday yet and i know she has the drivers......but hey if all else fails ill go to argos and buy another set of these cams its always prudent to have a spare or two... it will get sorted eventually regards slayer "SlAyEr" wrote in message ... i just found this folder in my system......not sure if these are the working camera drivers tho but worth a try ill attatch them fr you put these in their own folder and update the drivers from this folder... good luck let me know how it goes regards slayer "Tony Sutton" wrote in message ... This camera http://www.argos.co.uk/webapp/wcs/st...y?storeId=1000 1&langId=-1&catalogId=1001&productId=61375 No idea of its make, model, etc. No label or sticker on the camera. It is also nameless. The box was thrown away. Anyone knows what make this is? And is there any Windows XP drivers for this camera? Obviously, I need to know the model of this camera before searching for the correct drivers. Thanks, -- - Tony Sutton - http://www.hyperboard.co.uk - The Biggest Message Board! ------------------------------------------------------------- Eau Contrai the perfume for the perverse. ------------------------------------------------------------- |
#5
|
|||
|
|||
"SlAyEr" wrote in message
... as for whether this is a binaries ng or not doenst alter my descision to post the above files.... Er.. if you do post it in here, I won't be able to get it because my ISP blocks binary in a non binary newsgroup. Which is obviously correct Internet standard. Thanks, -- - Tony Sutton - http://www.hyperboard.co.uk - The Biggest Message Board! ------------------------------------------------------------- If I want your opinion, I'll ask you to fill out the necessary forms. ------------------------------------------------------------- |
#6
|
|||
|
|||
right guys...
i found the drivers tony needed and placed them on my server.. anybody in need of files or has any to share i will willingley place them on my server for people to access.. so if you spent ages getting a driver for some device you had not used then get in touch with me and we can place it on the server for sharing with other people that are looking for that driver too.. or any good sound information about webcams can be placed on the server too... might as well make good use of it...... the files allready there are for the argos smartcam... they sold them in pairs...very cheap but not that bad quality.. regards for the new year slayer "Si Ballenger" wrote in message ... On Wed, 31 Dec 2003 16:38:34 +0000 (UTC), "SlAyEr" wrote: as for whether this is a binaries ng or not doenst alter my descision to post the above files.... as far as i can see if one isnt spamming one can do what one likes,,,, and i tend to do what i like..... A wiser thing to do is go to geocities and get a web page and put the drivers there so they will be available any time in the future. |
#7
|
|||
|
|||
The drivers are also available through the manufacturers, at
http://www.dynamode.net The camera you want is the M6215 I bought two from Argos yesterday, and have one working fine.... but am having great problems getting two of these on the same Win2K machine to work properly (well, at all for the second one). Device manager just lists it with an ! and gives 'error code 10 - device failed to start' Dunno what it is, but if anyone has two working on a Win2K machine I'd be pleased to know - and if anyone can think of why I can't get this to work and a possible fix, I'd also VERY much like to know. Thanks Adrian "SlAyEr" wrote in message ... right guys... i found the drivers tony needed and placed them on my server.. anybody in need of files or has any to share i will willingley place them on my server for people to access.. so if you spent ages getting a driver for some device you had not used then get in touch with me and we can place it on the server for sharing with other people that are looking for that driver too.. or any good sound information about webcams can be placed on the server too... might as well make good use of it...... the files allready there are for the argos smartcam... they sold them in pairs...very cheap but not that bad quality.. regards for the new year slayer "Si Ballenger" wrote in message ... On Wed, 31 Dec 2003 16:38:34 +0000 (UTC), "SlAyEr" wrote: as for whether this is a binaries ng or not doenst alter my descision to post the above files.... as far as i can see if one isnt spamming one can do what one likes,,,, and i tend to do what i like..... A wiser thing to do is go to geocities and get a web page and put the drivers there so they will be available any time in the future. |
#8
|
|||
|
|||
problem will be the system trying to use the same driver for two cams....
it wont have it... nut if you can force one cam to use the basic windows driver and the other cam to use the driver supplied.... you might just get lucky... i would suggest if you have the capabilities.. to plug one into usb2 and one into usb1,, again if your lucky it might not be too hard to get both to work in this set up.. but unless you have this theni suggest getting another camera from a different manufacturer.. thanks for the driver link.. ill add that to my server regards slayer "Adrian Wright" wrote in message ... The drivers are also available through the manufacturers, at http://www.dynamode.net The camera you want is the M6215 I bought two from Argos yesterday, and have one working fine.... but am having great problems getting two of these on the same Win2K machine to work properly (well, at all for the second one). Device manager just lists it with an ! and gives 'error code 10 - device failed to start' Dunno what it is, but if anyone has two working on a Win2K machine I'd be pleased to know - and if anyone can think of why I can't get this to work and a possible fix, I'd also VERY much like to know. Thanks Adrian "SlAyEr" wrote in message ... right guys... i found the drivers tony needed and placed them on my server.. anybody in need of files or has any to share i will willingley place them on my server for people to access.. so if you spent ages getting a driver for some device you had not used then get in touch with me and we can place it on the server for sharing with other people that are looking for that driver too.. or any good sound information about webcams can be placed on the server too... might as well make good use of it...... the files allready there are for the argos smartcam... they sold them in pairs...very cheap but not that bad quality.. regards for the new year slayer "Si Ballenger" wrote in message ... On Wed, 31 Dec 2003 16:38:34 +0000 (UTC), "SlAyEr" wrote: as for whether this is a binaries ng or not doenst alter my descision to post the above files.... as far as i can see if one isnt spamming one can do what one likes,,,, and i tend to do what i like..... A wiser thing to do is go to geocities and get a web page and put the drivers there so they will be available any time in the future. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
8500DV - on restart WinXP h/w auto detect reinstalls old drivers I just removed!! | Ian Roberts | Ati Videocards | 6 | July 20th 04 01:16 PM |
Opinions - nVidia drivers kept crashing/rebooting this PC or is it bad RAM..??? | Bruce Tyler | Nvidia Videocards | 4 | June 29th 04 05:57 PM |
Help with removing ancient "Platinum XG300" drivers | Joshua Martin | Nvidia Videocards | 1 | April 28th 04 10:47 PM |
Forceware Drivers | PBM | Nvidia Videocards | 2 | February 20th 04 09:53 PM |
Installing older 43.45 display drivers | Max Harrell | Nvidia Videocards | 8 | December 17th 03 05:53 PM |