If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Epson R300 cd printing
got the CD printing working great for the R300 printer as far as it
goes but the templete in the printer has a large 4.5cm unprinted hole in the middle of the CD whereas the printable CDs I am using have a much larger printable area. is there a way to get the largable area? (I am using the card slot to print direct from the printer) - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...c-d549e513f0bf -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) |
#2
|
|||
|
|||
Epson R300 cd printing
On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions. "Luke Curtis" wrote in message ... got the CD printing working great for the R300 printer as far as it goes but the templete in the printer has a large 4.5cm unprinted hole in the middle of the CD whereas the printable CDs I am using have a much larger printable area. is there a way to get the largable area? (I am using the card slot to print direct from the printer) - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...c-d549e513f0bf -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) |
#3
|
|||
|
|||
Epson R300 cd printing
[snip]
is there a way to get the largable area? (I am using the card slot to print direct from the printer) On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. Not if you print direct from memory card. -- disgust me. spams a lot in game so I am posting as often as possible so would start getting spammed eye for an eye. for good luck, and |
#4
|
|||
|
|||
Epson R300 cd printing
On Sun, 07 Oct 2007 03:47:28 GMT, "Marten" wrote:
On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. I did not get any software with the printer and there is no specialist CD printing software on the Epson site, just the card monitor and the status monitor - what about the Nero CD software, would that work? "Luke Curtis" wrote in message .. . got the CD printing working great for the R300 printer as far as it goes but the templete in the printer has a large 4.5cm unprinted hole in the middle of the CD whereas the printable CDs I am using have a much larger printable area. is there a way to get the largable area? (I am using the card slot to print direct from the printer) - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...c-d549e513f0bf -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...c-d549e513f0bf -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) |
#5
|
|||
|
|||
Epson R300 cd printing
Impmon wrote:
[snip] is there a way to get the largable area? (I am using the card slot to print direct from the printer) On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. Not if you print direct from memory card. Why would one ever print a CD from the memory card even if one could? -- john mcwilliams |
#6
|
|||
|
|||
Epson R300 cd printing
John McWilliams wrote in
: Impmon wrote: [snip] is there a way to get the largable area? (I am using the card slot to print direct from the printer) On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. Not if you print direct from memory card. Why would one ever print a CD from the memory card even if one could? To put a photo from a camera directly on a cd without dealing with a PC? Seems like a pretty reasonable expectation to me, particularly if you have one of those 'cd writer photo save' gadgets that transfers memory card contents directly to a cd for archiving. |
#7
|
|||
|
|||
Epson R300 cd printing
On Tue, 09 Oct 2007 10:08:52 -0700, John McWilliams
wrote: Impmon wrote: [snip] is there a way to get the largable area? (I am using the card slot to print direct from the printer) On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. Not if you print direct from memory card. Why would one ever print a CD from the memory card even if one could? I bought the printer second hand off a boot sale - I did not get any instructions or disks with it at all - and at £15 for the printer and 17 assorted sealed ink cartridges it is one of the best bargains I've ever had! - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...c-d549e513f0bf -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) |
#8
|
|||
|
|||
Epson R300 cd printing
Luke Curtis wrote:
On Tue, 09 Oct 2007 10:08:52 -0700, John McWilliams wrote: Impmon wrote: [snip] is there a way to get the largable area? (I am using the card slot to print direct from the printer) On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. Not if you print direct from memory card. Why would one ever print a CD from the memory card even if one could? I bought the printer second hand off a boot sale - I did not get any instructions or disks with it at all - and at £15 for the printer and 17 assorted sealed ink cartridges it is one of the best bargains I've ever had! If the cartridges are oem, maybe even if not, you got a fine deal- the cartridges alone are worth it! You should be able to find drivers for in on Epson's site, though maybe not for the stand-alone CD design and print software. -- john mcwilliams |
#9
|
|||
|
|||
Epson R300 cd printing
On Oct 8, 2:14 pm, Luke Curtis wrote:
On Sun, 07 Oct 2007 03:47:28 GMT, "Marten" wrote: On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. I did not get any software with the printer and there is no specialist CD printing software on the Epson site, just the card monitor and the status monitor - what about the Nero CD software, would that work? "Luke Curtis" wrote in message .. . got the CD printing working great for the R300 printer as far as it goes but the templete in the printer has a large 4.5cm unprinted hole in the middle of the CD whereas the printable CDs I am using have a much larger printable area. is there a way to get the largable area? (I am using the card slot to print direct from the printer) - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...7-4192-91cc-d5... -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) - Got unwanted CDs, DVDs & Games?http://www.swapshop.co.uk/default.as...7-4192-91cc-d5... -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode)- Hide quoted text - - Show quoted text - For Epson printers, you need their PrintCD software. The same software works on Epson R200 series printers for sure, the R200, R220 and R260. I have had those three printers. The cover labels you make using the Epson PrintCD software only work with Epson printer drivers. That explains why discontinued Epson R220 printers fetch such high prices on ebay - the R220s accept generic ink cartridges and print faster and with less noise than the R260, now also discontinued. For someone with a lot of CD and DVD covers created in the proprietary Epson format, it is tough to see all that work lost. |
#10
|
|||
|
|||
Epson R300 cd printing
On Thu, 11 Oct 2007 23:56:25 -0700, gerry wrote:
On Oct 8, 2:14 pm, Luke Curtis wrote: On Sun, 07 Oct 2007 03:47:28 GMT, "Marten" wrote: On the left side of the CD Print program is a yellow CD. Click on in to set the inner and outer ring dimentions. I did not get any software with the printer and there is no specialist CD printing software on the Epson site, just the card monitor and the status monitor - what about the Nero CD software, would that work? "Luke Curtis" wrote in message .. . got the CD printing working great for the R300 printer as far as it goes but the templete in the printer has a large 4.5cm unprinted hole in the middle of the CD whereas the printable CDs I am using have a much larger printable area. is there a way to get the largable area? (I am using the card slot to print direct from the printer) - Got unwanted CDs, DVDs & Games? http://www.swapshop.co.uk/default.as...7-4192-91cc-d5... -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode) - Got unwanted CDs, DVDs & Games?http://www.swapshop.co.uk/default.as...7-4192-91cc-d5... -- ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity systemishowit'sdesigned! Thatdependsonwhyitwasdesigned! Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect ! (Blakes 7, City on the Edge of the World - Vila in typical panic mode)- Hide quoted text - - Show quoted text - For Epson printers, you need their PrintCD software. The same software works on Epson R200 series printers for sure, the R200, R220 and R260. R320 too! Jethro I have had those three printers. The cover labels you make using the Epson PrintCD software only work with Epson printer drivers. That explains why discontinued Epson R220 printers fetch such high prices on ebay - the R220s accept generic ink cartridges and print faster and with less noise than the R260, now also discontinued. For someone with a lot of CD and DVD covers created in the proprietary Epson format, it is tough to see all that work lost. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Epson R300 dark printing | Patrick Butler | Printers | 6 | November 14th 05 11:33 PM |
Epson R300 - Mono printing has red tinge | Martin | Printers | 3 | March 20th 05 05:35 PM |
Epson R300 - Printing issue | LD | Printers | 5 | January 26th 05 01:33 PM |
Epson Stylus Photo R300 - Printing on Media | Bad Bubba | Printers | 3 | July 20th 04 10:52 AM |
Printing Orange with Epson R300 | Tommy T | Printers | 6 | June 15th 04 10:17 PM |