I have two sticks of 256mb PC-150, one from MCI/MDT and the other from Corsair. The system only registers 384MB's upon system boot. That and the system reports 128mb sticks installed in banks 0/1/3. I already replaced the capacitors with high quality Panasonic caps.. So that isn't the...

Hi everyone, Was just wondering if any of you out there had any experience or an oppinion on the motherboards in the subject? Would it be worth my while to upgrade from the IC7-Max3 to the Fatal1ty board? Apart from the obvious CPU difference, will the end result be a better system? Thanks for...

Hello, Posted earlier about this board, kt7a Raid, and it's ability to run xp CPUs. Just for info, following installation of latest bios, the machine is happily running an xp2400+ on a fresh install of winxp pro very well indeed. Nice. Many thanks for assistance on this. all the best john

Hi all, I bought an AG8 3rd eye motherboard with P4 530 CPU, kingston 512 mb DDR PC3200 and ABIT 300XE PIC-E SVGA. Since the first time I get a problem to boot up the machine, that freeze the system during the BIOS sequence just after the recognise of the processor. The monitor freeze with the...

Has anyone figured out how to stop uGURU from interfering with the sound on an AI7 mb? GC

Hi everybody, I have a problem with a TH7II motherboard. Sometimes, i have the post code 00 or 26. I've update my bios program and clear CMOS but it's the same... When i try 20 or 30 times, the pc boot normally...

I had to reinstall Windows XP tonight. I have an Abit NF7-s motherboard. Some of the Nvidia drivers didn't install. I've tried several times to reinstall the drivers both with the installation CD and the "Device Manager". The Hardware Update Wizard finds the driver and highlights it. I click...

Hi I recently bought the above mainboard with a intel 3.2 ghz cpu. After a few days and when i was working with my computer a alarm began. The indicator showed code error 26 and i found that it was my PWM that was the problem. For a test i took a dvd to rip and put a 550w dual psu in instead of my...

Hi. I wonder if anyone here has the solution to the problems I am experiencing with this motherboard? When playing mp3 files, avi files or games, the system locks up after a period between 20 and 60 minutes. Sometimes it completely locks up and I have to cut the power. Sometimes it reboots itself...

What is the maximum hdd size for this board? In the bios updates http://www2.abit.com.tw/page/uk/download/download_detail.php?pFILE_TYPE=Bios&pMAIN_TYPE=Motherboard&pTITLE_ON_SCREEN=KT7-RAID&pSOCKET_TYPE=Socket+A it says "Support up to 137GB HDD and above". Any idea what the hdd limit of the...

Can a Powerleap PL-iP3/T version 2.0 be used with a Coppermine celeron instead of a Tualatin celeron? Thanks!

Thanks for looking. I've inherited a machine with the kt7a Raid ver 1.3 and an Athlon 1100 within. I'd like to up the cpu and have been scanning and googling about to see what's possible. Not a lot of clarity on the subject and was wondering if anyone herein could help with a definitive...

Hello, Intel P4, 3.0E Ghz (Prescott core) 1 GB, Kingston HyperX PC3500 RAM WD-740 Raptors (2) SATA on the Intel ICH5R controller Using the 2 WD SATA drives I compared 2 different configurations for file system benchmark.

hi all i have a three-year-old kr7a abit mobo, and it's time to give it some upgrade. i want to drop an athlonxp 2400 into it, but i'm not sure what will happen? the mobo only support up to athlonxp 2200, but the athlonxp 2400 is only one step ahead and is exactly the same thoroughbred core. so...

Hello, I will be replacing an Abit KT7A mainboard (socket A, VIA KT133/VIA 686B chipset) with an Abit AN7 mainboard (socket A, VNVIDIA nForce 2 Ultra 400 chipset) with Athlon 64 3200+ processor. The machine currently runs Windows XP Professional. My question is will I have to reinstall Windows...

Anyone have a multicard reader hooked up to their NF7-S or a KD7? I'm having one heck of a time trying to get these Mitsumi FA402A to read floppies and mass storage cards ! Seems Microsoft has no answers nor does Mitsumi Maybe some of you have tried this .... I've tried everything I can think of...

Hi group, I have a machine built on an Abit IC 7 G, since 7 - 8 months. Very pleased with it. The onboard sound chip is I believe, a Realtek AC 97. Lately something seems to have happened with it. The sound input thing is way too loud, or too sensitive. There is no room left for dynamics at all.

Hello, I realize that systems like below have been around since spring 2003, but bear with me. This is a Cadillac of a system for me. System: Abit IC7-G motherboard Kingston HyperX PC3500 1G (paired in dual ch.) Intel P4 3.0E Ghz (Prescott) (oc'd to 3.57 Ghz)

I've been told that if you utilize onboard graphics, you're memory is limited to DDR333 speeds regardless of the memory used. I assume this means overclocking the fsb is also compromised, at least at synchronous speeds. A friend pointed me to the RAM section...

Attention Experts: I did a baddddddddd thing...My attempt at updating my bios went horribly wrong when it stalled RIGHT IN THE MIDDLE of the update.I tried the "floppy" fix by placing on it the flasher and bios update along with an autoexec file with the suitable command to flash the bios that...