A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Is My Burner Broken?



 
 
Thread Tools Display Modes
  #1  
Old August 11th 04, 02:58 PM
ggroups2
external usenet poster
 
Posts: n/a
Default Is My Burner Broken?

Everytime I try to burn something I get a drive speed error. I tried
different media too, it happened all of a sudden, I didn't change a
thing. I presented this log to Nero Support and they tell me to
upgrade my Nero 5 to the latest version (I'm using Nero 6).

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created
8/24/1999 9:55:32 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.15
Recorder: AOPEN CRW1232 Version: 1.31 - HA 2 TA
1 - 6.3.1.15
Adapter driver: IdeChnDr HA 2
Drive buffer : 4096kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: AOPEN CRW1232 Version: 1.31 - HA 2
TA 1 - 6.3.1.15
Adapter driver: IdeChnDr HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Promise 3+0 Stripe/RAID01.10 fasttx2k Port 0 ID
0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B IdeChnDr Port 2 ID
0 DMA: On
CdRomPeripheral : AOPEN CRW1232 IdeChnDr Port 2 ID
1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID
0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 D: CDRom0
AOPEN CRW1232 E: CDRom1
Generic DVD-ROM F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523732kB)
Free physical memory: 68MB (70488kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.8.2004
CD-ROM (Boot)
8:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : DOS
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

8:40:57 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

8:40:57 PM #3 Text 0 File Writer.cpp, Line 124
Writer AOPEN CRW1232 running

8:40:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:40:58 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

8:40:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 299651 ( 66:37.26)

8:40:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

8:40:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: AOPEN CRW1232;
CDR code: 00 97 27 28; OSJ entry from: Princo Corporation
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3:
4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00
(invalid), 3: 00 00 00 (invalid)

8:40:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
Protocol of DlgWaitCD activities:

=========================================

8:40:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 299652 (299652) = #299652/66:35.27
relocatable, disc pos for caching/writing not required/required,
no patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
299652 blocks [AOPEN CRW1232 ]
--------------------------------------------------------------

8:40:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [AOPEN CRW1232 ] for write in
CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
613994496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
299652 | lead-out | 1 | 0x00 | 0x41

8:40:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

8:41:18 PM #13 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

8:41:18 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

8:41:18 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (1,200 KB/s)

8:41:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0

8:41:18 PM #17 Text 0 File Mmc.cpp, Line 15624
StartDAO : CD-Text - Off

8:41:18 PM #18 Text 0 File Mmc.cpp, Line 15911
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 42 25 1b

8:41:23 PM #19 SCSI -1152 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

8:41:28 PM #20 SCSI -1152 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x037F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00
0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

8:41:28 PM #21 CDR -1152 File Writer.cpp, Line 304
Disc speed error

8:41:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:41:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

8:41:29 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) - OK

8:41:29 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created
10/15/2002 1:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  #2  
Old August 11th 04, 03:05 PM
Noozer
external usenet poster
 
Posts: n/a
Default

I've had similar problems and usually just reinstalling the software has
fixed them. A DLL file gets damaged or changed and it causes issues.

Since you have XP, you should be able to record without adding any software.
Select some files, right click, Send To-CD Drive X: ... You should then be
able to open your CD drive in MY COMPUTER, right click and choose "Write
these files..."

If you have a second PC, you could try moving the drive over to test it.
This would eliminate the software being broken if you had the same problem.

"ggroups2" wrote in message
...
Everytime I try to burn something I get a drive speed error. I tried
different media too, it happened all of a sudden, I didn't change a
thing. I presented this log to Nero Support and they tell me to
upgrade my Nero 5 to the latest version (I'm using Nero 6).

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created
8/24/1999 9:55:32 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.15
Recorder: AOPEN CRW1232 Version: 1.31 - HA 2 TA
1 - 6.3.1.15
Adapter driver: IdeChnDr HA 2
Drive buffer : 4096kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: AOPEN CRW1232 Version: 1.31 - HA 2
TA 1 - 6.3.1.15
Adapter driver: IdeChnDr HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Promise 3+0 Stripe/RAID01.10 fasttx2k Port 0 ID
0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B IdeChnDr Port 2 ID
0 DMA: On
CdRomPeripheral : AOPEN CRW1232 IdeChnDr Port 2 ID
1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID
0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 D: CDRom0
AOPEN CRW1232 E: CDRom1
Generic DVD-ROM F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523732kB)
Free physical memory: 68MB (70488kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.8.2004
CD-ROM (Boot)
8:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : DOS
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

8:40:57 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

8:40:57 PM #3 Text 0 File Writer.cpp, Line 124
Writer AOPEN CRW1232 running

8:40:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:40:58 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

8:40:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 299651 ( 66:37.26)

8:40:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

8:40:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: AOPEN CRW1232;
CDR code: 00 97 27 28; OSJ entry from: Princo Corporation
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3:
4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00
(invalid), 3: 00 00 00 (invalid)

8:40:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
Protocol of DlgWaitCD activities:

=========================================

8:40:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 299652 (299652) = #299652/66:35.27
relocatable, disc pos for caching/writing not required/required,
no patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
299652 blocks [AOPEN CRW1232 ]
--------------------------------------------------------------

8:40:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [AOPEN CRW1232 ] for write in
CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
613994496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
299652 | lead-out | 1 | 0x00 | 0x41

8:40:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

8:41:18 PM #13 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

8:41:18 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

8:41:18 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (1,200 KB/s)

8:41:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0

8:41:18 PM #17 Text 0 File Mmc.cpp, Line 15624
StartDAO : CD-Text - Off

8:41:18 PM #18 Text 0 File Mmc.cpp, Line 15911
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 42 25 1b

8:41:23 PM #19 SCSI -1152 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

8:41:28 PM #20 SCSI -1152 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x037F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00
0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

8:41:28 PM #21 CDR -1152 File Writer.cpp, Line 304
Disc speed error

8:41:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:41:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

8:41:29 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) - OK

8:41:29 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created
10/15/2002 1:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



  #3  
Old August 11th 04, 08:33 PM
JK
external usenet poster
 
Posts: n/a
Default

Reinstalling the software is a good idea. I recommend not installing
the packet writing software, and just installing the mastering software.
Also burn the CD from the hard drive. Make sure to defragment the hard
drive on a regular basis.


Noozer wrote:

I've had similar problems and usually just reinstalling the software has
fixed them. A DLL file gets damaged or changed and it causes issues.

Since you have XP, you should be able to record without adding any software.
Select some files, right click, Send To-CD Drive X: ... You should then be
able to open your CD drive in MY COMPUTER, right click and choose "Write
these files..."

If you have a second PC, you could try moving the drive over to test it.
This would eliminate the software being broken if you had the same problem.

"ggroups2" wrote in message
...
Everytime I try to burn something I get a drive speed error. I tried
different media too, it happened all of a sudden, I didn't change a
thing. I presented this log to Nero Support and they tell me to
upgrade my Nero 5 to the latest version (I'm using Nero 6).

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created
8/24/1999 9:55:32 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.15
Recorder: AOPEN CRW1232 Version: 1.31 - HA 2 TA
1 - 6.3.1.15
Adapter driver: IdeChnDr HA 2
Drive buffer : 4096kB
Bus Type : default (0) - ATAPI, detected: ATAPI
CD-ROM: AOPEN CRW1232 Version: 1.31 - HA 2
TA 1 - 6.3.1.15
Adapter driver: IdeChnDr HA 2

=== Scsi-Device-Map ===
DiskPeripheral : Promise 3+0 Stripe/RAID01.10 fasttx2k Port 0 ID
0 DMA: Off
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B IdeChnDr Port 2 ID
0 DMA: On
CdRomPeripheral : AOPEN CRW1232 IdeChnDr Port 2 ID
1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 3 ID
0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 D: CDRom0
AOPEN CRW1232 E: CDRom1
Generic DVD-ROM F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523732kB)
Free physical memory: 68MB (70488kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.8.2004
CD-ROM (Boot)
8:40:57 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : DOS
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : FALSE

8:40:57 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

8:40:57 PM #3 Text 0 File Writer.cpp, Line 124
Writer AOPEN CRW1232 running

8:40:57 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:40:58 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

8:40:58 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 299651 ( 66:37.26)

8:40:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

8:40:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: AOPEN CRW1232;
CDR code: 00 97 27 28; OSJ entry from: Princo Corporation
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3:
4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00
(invalid), 3: 00 00 00 (invalid)

8:40:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
Protocol of DlgWaitCD activities:

=========================================

8:40:58 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 299652 (299652) = #299652/66:35.27
relocatable, disc pos for caching/writing not required/required,
no patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
299652 blocks [AOPEN CRW1232 ]
--------------------------------------------------------------

8:40:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 983
Prepare recorder [AOPEN CRW1232 ] for write in
CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
613994496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
299652 | lead-out | 1 | 0x00 | 0x41

8:40:58 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

8:41:18 PM #13 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

8:41:18 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

8:41:18 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (1,200 KB/s)

8:41:18 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2343
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0

8:41:18 PM #17 Text 0 File Mmc.cpp, Line 15624
StartDAO : CD-Text - Off

8:41:18 PM #18 Text 0 File Mmc.cpp, Line 15911
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 42 25 1b

8:41:23 PM #19 SCSI -1152 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x54 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

8:41:28 PM #20 SCSI -1152 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x037F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x20 0x00 0x00
0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

8:41:28 PM #21 CDR -1152 File Writer.cpp, Line 304
Disc speed error

8:41:28 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:41:29 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

8:41:29 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) - OK

8:41:29 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (1,200 KB/s)


Existing drivers:
File 'Drivers\IdeChnDr.sys': Ver=?.?.?.?, size=101431 bytes, created
10/15/2002 1:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


  #4  
Old August 12th 04, 03:54 AM
ggroups2
external usenet poster
 
Posts: n/a
Default

I tried all those things and put it in another computer.
Anyway I think I totally broke it when I took it apart and put it back
together. Won't read cds anymore. Oh well time to get a new one.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slowest cd burning speed on dvd burner Chris General 1 April 3rd 04 01:54 AM
DVD Burner For Laptop Buck Turgidson General 3 March 10th 04 04:23 AM
Modem - dial tone broken up, but voice ok Zardoz General 1 January 5th 04 03:06 AM
DVD Burner in 5 Year-old PC Buck Turgidson General 3 December 6th 03 07:58 PM
CD & DVD burner on Primary/Secondary Master IDE channel @drian General 2 November 13th 03 10:59 AM


All times are GMT +1. The time now is 01:32 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.