If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
55.03 & MX440SE & TV resize - Help
I recently updated to the 55.03 driver, and yes I know there is no
perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. |
#2
|
|||
|
|||
On Thu, 15 Jan 2004 12:42:08 +1300 ??? meeped :
I recently updated to the 55.03 driver, and yes I know there is no perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. RIght click on tray icon.... [nview display mode....dual display.... analog + tv then... RIght click on tray icon... [adjust display properties] [settings].. [advanced]..[Geforce blah blah].. select Niew Display Mode on left slide out menu click on the right side graphic with the BIG 2 on it [device settings]...device adjustment.. then you can shift left or right ..or zoom or shrink HTH |
#3
|
|||
|
|||
On Thu, 15 Jan 2004 03:37:18 GMT, Granulated
wrote: On Thu, 15 Jan 2004 12:42:08 +1300 ??? meeped : I recently updated to the 55.03 driver, and yes I know there is no perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. RIght click on tray icon.... [nview display mode....dual display.... analog + tv then... RIght click on tray icon... [adjust display properties] [settings].. [advanced]..[Geforce blah blah].. select Niew Display Mode on left slide out menu click on the right side graphic with the BIG 2 on it [device settings]...device adjustment.. then you can shift left or right ..or zoom or shrink HTH There is not adjustment there... that is the problem. |
#4
|
|||
|
|||
What do you mean by "not adjustment there." Do you mean you don't have a
monitor with a "2" on it, or that you DO see this, but when you right click on the "2", you don't get a pop up menu, or that you DO see a page with some adjustments on it, but just no slider? I can't speak for the 53.03 drivers yet, but I know that with the 52.16's, they replaced the "slider" with little "+" and "-" icons inside the image of the monitor on the "Device Adjustments" page for the "TV output." Clicking on these icons allows you to select overscan or underscan. Larry "???" wrote in message ... On Thu, 15 Jan 2004 03:37:18 GMT, Granulated wrote: On Thu, 15 Jan 2004 12:42:08 +1300 ??? meeped : I recently updated to the 55.03 driver, and yes I know there is no perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. RIght click on tray icon.... [nview display mode....dual display.... analog + tv then... RIght click on tray icon... [adjust display properties] [settings].. [advanced]..[Geforce blah blah].. select Niew Display Mode on left slide out menu click on the right side graphic with the BIG 2 on it [device settings]...device adjustment.. then you can shift left or right ...or zoom or shrink HTH There is not adjustment there... that is the problem. |
#5
|
|||
|
|||
On Thu, 15 Jan 2004 06:42:58 GMT, "Larry L."
wrote: What do you mean by "not adjustment there." Do you mean you don't have a monitor with a "2" on it, or that you DO see this, but when you right click on the "2", you don't get a pop up menu, or that you DO see a page with some adjustments on it, but just no slider? I can't speak for the 53.03 drivers yet, but I know that with the 52.16's, they replaced the "slider" with little "+" and "-" icons inside the image of the monitor on the "Device Adjustments" page for the "TV output." Clicking on these icons allows you to select overscan or underscan. Larry Many thanks Larry, the manuals did not metion the + and - in the monitor image. Problem all fixed now. "???" wrote in message .. . On Thu, 15 Jan 2004 03:37:18 GMT, Granulated wrote: On Thu, 15 Jan 2004 12:42:08 +1300 ??? meeped : I recently updated to the 55.03 driver, and yes I know there is no perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. RIght click on tray icon.... [nview display mode....dual display.... analog + tv then... RIght click on tray icon... [adjust display properties] [settings].. [advanced]..[Geforce blah blah].. select Niew Display Mode on left slide out menu click on the right side graphic with the BIG 2 on it [device settings]...device adjustment.. then you can shift left or right ..or zoom or shrink HTH There is not adjustment there... that is the problem. |
#6
|
|||
|
|||
On Thu, 15 Jan 2004 22:23:10 +1300 ??? meeped :
Many thanks Larry, the manuals did not metion the + and - in the monitor image. Problem all fixed now. Manuals ??...lmao !! |
#7
|
|||
|
|||
On Thu, 15 Jan 2004 22:23:10 +1300 ??? meeped :
Many thanks Larry, the manuals did not metion the + and - in the monitor image. Problem all fixed now. oh..and don't bother thanking me..ya git ! ( ; D) |
#8
|
|||
|
|||
Although nvidia say it's backwards compatible you're better off with 45.23;
i mean the new detonator drivers support dx 9, mx440se is dirext7.1 - i dont' think the update would address too much with your card atall, it's very old...i've got it, good for what it's good for, but no more "???" wrote in message ... I recently updated to the 55.03 driver, and yes I know there is no perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. |
#9
|
|||
|
|||
On Sat, 17 Jan 2004 22:29:21 -0000, "Gordie"
wrote: Although nvidia say it's backwards compatible you're better off with 45.23; i mean the new detonator drivers support dx 9, mx440se is dirext7.1 - i dont' think the update would address too much with your card atall, it's very old...i've got it, good for what it's good for, but no more The 45.23 drivers had a number of bugs, not to do with driver performance, i.e. crash with refresh rate overides and issues with some games. "???" wrote in message .. . I recently updated to the 55.03 driver, and yes I know there is no perfermance benifit in doing so, but I wanted the bug fixes. Also I like the colour correction options for the overlay!! With the 45.23 driver there was a slider to ajdust the size of the TV picture and after updating to 55.03 I cannot find the slider. I looked at the guides from nvidia and it says it supports it for the MV encoder, but the slider is not there!! My questions: 1. Has any one else had the same problem? 2. If had problem, other then moving backwards, how did you fix it? Many thanks. |
#10
|
|||
|
|||
On Fri, 16 Jan 2004 02:44:20 GMT, Granulated
wrote: On Thu, 15 Jan 2004 22:23:10 +1300 ??? meeped : Many thanks Larry, the manuals did not metion the + and - in the monitor image. Problem all fixed now. Manuals ??...lmao !! The guides from nvidia. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mx440se question | kernal_bogey | Nvidia Videocards | 4 | November 22nd 03 06:15 AM |
GF4 MX440SE TVout not working? Please help | Ivan | Nvidia Videocards | 1 | November 9th 03 09:58 AM |
nvidia - Linux - Resize - Tv-Out | Marcello | Nvidia Videocards | 0 | August 11th 03 07:31 PM |
Problems with P4S8X-X & GeForce 4 MX440SE 128MB DDR | ---]Rob[--- | Asus Motherboards | 5 | July 23rd 03 05:58 AM |
Problems with GeForce 4 MX440SE 128MB DDR | pudj | Nvidia Videocards | 0 | July 22nd 03 03:12 AM |