If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to get printer IP address via command line?
Hello:
Another question for you printer experts out there! ;-) We have several networked printers on the system and I'm trying to find a way to get their IP addresses via a command (DOS) line command. Like Ping for example. I was told that should work and it does if I ping the actual IP address. But if I ping the printer's "name" in the system, it doesn't work. I get the following message (PR34 is the printer's name): "Ping reqeust could not find host PR34. Please check the name and try again." I need a way to get the IP address from the "name" of the printer if that's even possible. I know someone who can do this with their printer on their network, but not sure why it's not working on ours. Thx in advance, JJ |
#2
|
|||
|
|||
How to get printer IP address via command line?
On Tue, 12 Apr 2011 12:43:28 -0400, "JJ"
wrote: Hello: Another question for you printer experts out there! ;-) We have several networked printers on the system and I'm trying to find a way to get their IP addresses via a command (DOS) line command. Like Ping for example. I was told that should work and it does if I ping the actual IP address. But if I ping the printer's "name" in the system, it doesn't work. I get the following message (PR34 is the printer's name): "Ping reqeust could not find host PR34. Please check the name and try again." I need a way to get the IP address from the "name" of the printer if that's even possible. I know someone who can do this with their printer on their network, but not sure why it's not working on ours. Thx in advance, JJ nslookup printername include the whole domain name if not set as the default on your system. |
#3
|
|||
|
|||
How to get printer IP address via command line?
"me" wrote in message
... nslookup printername include the whole domain name if not set as the default on your system. Thanks, I should have mentioned that I tried that command. It does return an IP but not the right one. When I then take that IP and enter into a browser, it doesn't connect to the printer. When I look at Control Panel, Printers..., select the printer, look at Properties, Port, Config Port...the IP address there is different. Why would that be do you know? That IP address *will* work in a browser, bringing up the printer's browser based command screen. That's what I'm trying to get at, *that* IP address... Odd. Thx, JJ |
#4
|
|||
|
|||
How to get printer IP address via command line?
On Tue, 12 Apr 2011 15:30:43 -0400, me wrote:
On Tue, 12 Apr 2011 12:43:28 -0400, "JJ" wrote: Hello: Another question for you printer experts out there! ;-) We have several networked printers on the system and I'm trying to find a way to get their IP addresses via a command (DOS) line command. Like Ping for example. I was told that should work and it does if I ping the actual IP address. But if I ping the printer's "name" in the system, it doesn't work. I get the following message (PR34 is the printer's name): "Ping reqeust could not find host PR34. Please check the name and try again." I need a way to get the IP address from the "name" of the printer if that's even possible. I know someone who can do this with their printer on their network, but not sure why it's not working on ours. Thx in advance, JJ nslookup printername include the whole domain name if not set as the default on your system. I suspect the printers haven't been put into DNS at all. -- Use the BIG mirror service in the UK: http://www.mirrorservice.org *lightning protection* - a w_tom conductor |
#5
|
|||
|
|||
How to get printer IP address via command line?
On Tue, 12 Apr 2011 16:01:00 -0400, "JJ"
wrote: "me" wrote in message .. . nslookup printername include the whole domain name if not set as the default on your system. Thanks, I should have mentioned that I tried that command. It does return an IP but not the right one. When I then take that IP and enter into a browser, it doesn't connect to the printer. When I look at Control Panel, Printers..., select the printer, look at Properties, Port, Config Port...the IP address there is different. Why would that be do you know? That IP address *will* work in a browser, bringing up the printer's browser based command screen. That's what I'm trying to get at, *that* IP address... Odd. Thx, JJ I would think this points to DNS/host table issues since nslookup is going to get it's info from here. If the name has the incorrect IP address associated with it then that's a real problem. What method is used to assign IP addresses on your network? I'm quickly coming to the limits of my knowledge here. |
#6
|
|||
|
|||
How to get printer IP address via command line?
On 12 Apr 2011 20:02:07 GMT, Bob Eager wrote:
I suspect the printers haven't been put into DNS at all. Look at the reply to my suggestion. nslookup gets an IP address that appears to be different from the one the PC has for the port connected to this printer. Something is not right in Denmark? |
#7
|
|||
|
|||
How to get printer IP address via command line?
On Tue, 12 Apr 2011 18:44:04 -0400, me wrote:
On 12 Apr 2011 20:02:07 GMT, Bob Eager wrote: I suspect the printers haven't been put into DNS at all. Look at the reply to my suggestion. nslookup gets an IP address that appears to be different from the one the PC has for the port connected to this printer. Something is not right in Denmark? You wonder if the network has a series of computers with names and IPs in DNS. And each printer attached to a computer has been given the (Windows network) name of that computer, which is in a different namespace and doesn't have a domain part. It would be interesting to do a reverse lookup on that IP address (the real one) to see if it has any kind of name associated with it. -- Use the BIG mirror service in the UK: http://www.mirrorservice.org *lightning protection* - a w_tom conductor |
#8
|
|||
|
|||
How to get printer IP address via command line?
"me" wrote in message
... I would think this points to DNS/host table issues since nslookup is going to get it's info from here. If the name has the incorrect IP address associated with it then that's a real problem. What method is used to assign IP addresses on your network? I'm quickly coming to the limits of my knowledge here. Well, you are w-a-y beyond my limited knowledge here! :-) The printer works fine and is accessible from many systems...I don't know how the IP was assigned. I'll have to ask the network folks. They, so far, have also been unable to help me do this...but it what it is. Thx again! JJ |
#9
|
|||
|
|||
How to get printer IP address via command line?
"Bob Eager" wrote in message
... On Tue, 12 Apr 2011 18:44:04 -0400, me wrote: On 12 Apr 2011 20:02:07 GMT, Bob Eager wrote: I suspect the printers haven't been put into DNS at all. Look at the reply to my suggestion. nslookup gets an IP address that appears to be different from the one the PC has for the port connected to this printer. Something is not right in Denmark? You wonder if the network has a series of computers with names and IPs in DNS. And each printer attached to a computer has been given the (Windows network) name of that computer, which is in a different namespace and doesn't have a domain part. It would be interesting to do a reverse lookup on that IP address (the real one) to see if it has any kind of name associated with it. I'm not sure how to do this...and I'm confused now! Very easy to to for me with this network stuff! ;-) It's odd for sure. I appreciate the input from everyone. JJ |
#10
|
|||
|
|||
How to get printer IP address via command line?
On Wed, 13 Apr 2011, in the Usenet newsgroup comp.periphs.printers, in article
, JJ wrote: "me" wrote ] nslookup printername ]Thanks, I should have mentioned that I tried that command. It does ]return an IP but not the right one. When I then take that IP and ]enter into a browser, it doesn't connect to the printer. Who ever set up the DNS has their head up-and-locked ]When I look at Control Panel, Printers..., select the printer, look at ]Properties, Port, Config Port...the IP address there is different. ]Why would that be do you know? The people who set up the DNS are not the ones who set up the printer OR either/both groups don't know what they are doing, and failed to click on the right icons and finish the setup. ]That IP address *will* work in a browser, bringing up the printer's ]browser based command screen. That's what I'm trying to get at, ]*that* IP address... Sounds as if you'll have to look at the control panel setup for each printer your computer knows about and write down the name/IP for your own use. Note that the addresses _may_ change each time things are re-booted/crash. I would think this points to DNS/host table issues since nslookup is going to get it's info from here. If the name has the incorrect IP address associated with it then that's a real problem. Exactly What method is used to assign IP addresses on your network? Good question - sounds like DHCP that isn't talking to DNS. I'm quickly coming to the limits of my knowledge here. Well, yeah - it's not exactly a printer/printing problem. Well, you are w-a-y beyond my limited knowledge here! :-) The printer works fine and is accessible from many systems...I don't know how the IP was assigned. It may not have been - it sounds as if your network is running some form of windoze, and who ever set it up is depending on ad-hoc networking, without having the first clue about network setup. I'll have to ask the network folks. They, so far, have also been unable to help me do this...but it what it is Two reasons - either they don't know (and this sounds more likely) and are just as lost as you are, OR they know, but have no desire to allow you to know for policy/sanity reasons. By the way, the reason the 'ping' won't work is because the nslookup won't work - they both depend on the same basic information. Old guy |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Command line option syntax error. Type Command /? for Help | §ñühw¤£f[_3_] | Homebuilt PC's | 2 | April 19th 09 10:23 PM |
trueimage - command line | Chris[_3_] | Storage (alternative) | 0 | December 5th 07 07:53 PM |
Help with Command Line | Bill V | Asus Motherboards | 2 | April 3rd 06 01:01 AM |
Ghost 9 command line? | Ge | Storage (alternative) | 11 | August 20th 05 06:24 PM |
communicating with printer drivers from command line? | [email protected] | Printers | 0 | August 12th 05 07:54 PM |