What kind of 2.5" HD adapter do I need?

Hello,

I decided to replace HD in my laptop. It is HP Pavilion DV2000. I need
some kind of adapter to connect it to my desktop (my desktop have SATA
and IDE drives) to clone the old HD to a new one.
It says my disk is SATA Serial - but I see it is not regular SATA
adapter.
Here are pictures of my HD:
http://www.evkosystems.kgbinternet.c...s/HP-test1.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test3.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test4.jpg

Any idea what kind adapter do I need?

Thanks,

Zalek

wrote:
Hello,

I decided to replace HD in my laptop. It is HP Pavilion DV2000. I need
some kind of adapter to connect it to my desktop (my desktop have SATA
and IDE drives) to clone the old HD to a new one.
It says my disk is SATA Serial - but I see it is not regular SATA
adapter.
Here are pictures of my HD:
http://www.evkosystems.kgbinternet.c...s/HP-test1.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test3.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test4.jpg

Any idea what kind adapter do I need?

Thanks,

Zalek

Looks like SATA. Comparing this picture of the MHV2100BH from the
Newegg site, I'd say there is some kind of adapter in place on the
drive you've got there (in your HP-test4.jpg). Maybe it unplugs to
reveal the normal SATA interface ?

http://images17.newegg.com/is/image/newegg/22-116-018-S02?$S640W$

http://www.newegg.com/Product/Produc...82E16822116018

Paul

Somewhere on teh intarwebs Paul wrote:
wrote:
Hello,

I decided to replace HD in my laptop. It is HP Pavilion DV2000. I
need some kind of adapter to connect it to my desktop (my desktop
have SATA and IDE drives) to clone the old HD to a new one.
It says my disk is SATA Serial - but I see it is not regular SATA
adapter.
Here are pictures of my HD:
http://www.evkosystems.kgbinternet.c...s/HP-test1.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test3.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test4.jpg

Any idea what kind adapter do I need?

Thanks,

Zalek

Looks like SATA. Comparing this picture of the MHV2100BH from the
Newegg site, I'd say there is some kind of adapter in place on the
drive you've got there (in your HP-test4.jpg). Maybe it unplugs to
reveal the normal SATA interface ?

http://images17.newegg.com/is/image/newegg/22-116-018-S02?$S640W$

http://www.newegg.com/Product/Produc...82E16822116018

That is so typical of HP / Compaq, adding another part that can go wrong
when the sata interface itself is designed for multiple insertions.

And if you don't believe that a simple passive adapter like that can go
wrong I've got a half-dozen HP/Compaq adapters from PATA HDDs that no longer
work. It was a real puzzle when I struck the first one and took me a while
to decide to buy a new adapter as I wasn't sure....

I've had quite a few go bad since then (of various types) and I dare say
these SATA ones will be the same. A money-spinner for HP.
--
Shaun.

"Give a man a fire and he's warm for the day. But set fire to him and he's
warm for the rest of his life." Terry Pratchet, 'Jingo'.

Somewhere on teh intarwebs ~misfit~ wrote:
Somewhere on teh intarwebs Paul wrote:
wrote:
Hello,

I decided to replace HD in my laptop. It is HP Pavilion DV2000. I
need some kind of adapter to connect it to my desktop (my desktop
have SATA and IDE drives) to clone the old HD to a new one.
It says my disk is SATA Serial - but I see it is not regular SATA
adapter.
Here are pictures of my HD:
http://www.evkosystems.kgbinternet.c...s/HP-test1.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test3.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test4.jpg

Any idea what kind adapter do I need?

Thanks,

Zalek

Looks like SATA. Comparing this picture of the MHV2100BH from the
Newegg site, I'd say there is some kind of adapter in place on the
drive you've got there (in your HP-test4.jpg). Maybe it unplugs to
reveal the normal SATA interface ?

http://images17.newegg.com/is/image/newegg/22-116-018-S02?$S640W$

http://www.newegg.com/Product/Produc...82E16822116018

That is so typical of HP / Compaq, adding another part that can go
wrong when the sata interface itself is designed for multiple
insertions.
And if you don't believe that a simple passive adapter like that can
go wrong I've got a half-dozen HP/Compaq adapters from PATA HDDs that
no longer work. It was a real puzzle when I struck the first one and
took me a while to decide to buy a new adapter as I wasn't sure....

I've had quite a few go bad since then (of various types) and I dare
say these SATA ones will be the same. A money-spinner for HP.

Actually Zalek, why do you need to replace the HDD? If it's because it's
malfunctioning there's a chance that it could be the adapter that's stuffed
rather than the HDD. Worth bearing in mind.
--
Shaun.

"Give a man a fire and he's warm for the day. But set fire to him and he's
warm for the rest of his life." Terry Pratchet, 'Jingo'.

The DRIVE is a standard SATA drive. However I think you have some kind
of interface adapter present on the drive to mate it to the laptop.
Remove the interface adapter.


wrote:
Hello,

I decided to replace HD in my laptop. It is HP Pavilion DV2000. I need
some kind of adapter to connect it to my desktop (my desktop have SATA
and IDE drives) to clone the old HD to a new one.
It says my disk is SATA Serial - but I see it is not regular SATA
adapter.
Here are pictures of my HD:
http://www.evkosystems.kgbinternet.c...s/HP-test1.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test3.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test4.jpg

Any idea what kind adapter do I need?

Thanks,

Zalek

In an earlier contribution to this discussion,
wrote:

Hello,

I decided to replace HD in my laptop. It is HP Pavilion DV2000. I need
some kind of adapter to connect it to my desktop (my desktop have SATA
and IDE drives) to clone the old HD to a new one.
It says my disk is SATA Serial - but I see it is not regular SATA
adapter.
Here are pictures of my HD:
http://www.evkosystems.kgbinternet.c...s/HP-test1.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test3.jpg
http://www.evkosystems.kgbinternet.c...s/HP-test4.jpg

Any idea what kind adapter do I need?

Thanks,

Zalek

Can you not network your laptop and desktop with an ethernet cable?[1] You
can then use Ghost (or equivalent) to make an image of the laptop's old HD
on the desktop - then replace the HD and and clone the image onto the new
one. That's whet I did when I upgraded my laptop's HD.

[You'll need to create a bootable system on a floppy (or other bootable
media recognised by the laptop's BIOS) containing PC-DOS, Ghost.exe and
support for a network connection].

[1] If it's a direct connection, you'll need a crossover cable but it goes
via a hub or wired router, you won't.
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!

In ,
Roger Mills typed on Sun, 17 Jan 2010 10:34:30 -0000:
[You'll need to create a bootable system on a floppy (or other
bootable media recognised by the laptop's BIOS) containing PC-DOS,
Ghost.exe and support for a network connection].

What version of Ghost are you running that runs under DOS? As all later
versions runs under Windows or Windows PE (aka BartPE or WinPE) and are
known as Ghost32. Does Ghost for DOS understand NTFS formats?

--
Bill
Gateway M465e ('06 era) - Windows XP SP3

In an earlier contribution to this discussion,
BillW50 wrote:

In ,
Roger Mills typed on Sun, 17 Jan 2010 10:34:30 -0000:
[You'll need to create a bootable system on a floppy (or other
bootable media recognised by the laptop's BIOS) containing PC-DOS,
Ghost.exe and support for a network connection].

What version of Ghost are you running that runs under DOS? As all
later versions runs under Windows or Windows PE (aka BartPE or WinPE)
and are known as Ghost32. Does Ghost for DOS understand NTFS formats?


I'm running Norton Ghost 2003 - and, yes, it understands NTFS. You can run
some functions under Windows, but have to resort to a version running from a
bootable DOS device to make an image of a system disk [1]. If you back up to
another machine over a network, the other machine can be running Windows.

[I'm not quite sure how you would clone a *live* Windows system, 'cos you'd
be aiming at a moving target!]

[1] You create the bootable system from within the Windows version,
specifiying what support you need for USB, Firewire or network devices so
that it includes the required drivers.
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!

In ,
Roger Mills typed on Sun, 17 Jan 2010 15:53:01 -0000:
In an earlier contribution to this discussion,
BillW50 wrote:

In ,
Roger Mills typed on Sun, 17 Jan 2010 10:34:30 -0000:
[You'll need to create a bootable system on a floppy (or other
bootable media recognised by the laptop's BIOS) containing PC-DOS,
Ghost.exe and support for a network connection].

What version of Ghost are you running that runs under DOS? As all
later versions runs under Windows or Windows PE (aka BartPE or WinPE)
and are known as Ghost32. Does Ghost for DOS understand NTFS formats?

I'm running Norton Ghost 2003 - and, yes, it understands NTFS. You
can run some functions under Windows, but have to resort to a version
running from a bootable DOS device to make an image of a system disk
[1]. If you back up to another machine over a network, the other
machine can be running Windows.
[I'm not quite sure how you would clone a *live* Windows system, 'cos
you'd be aiming at a moving target!]

[1] You create the bootable system from within the Windows version,
specifiying what support you need for USB, Firewire or network
devices so that it includes the required drivers.

Oh so you have both Ghost.exe and Ghost32.exe with Ghost 2003, right?

The trick to clone a live Windows is sometimes done through Windows VSS
(services). Sometimes third party backup programs use their own version
of the service.

http://en.wikipedia.org/wiki/Shadow_Copy

I have used many different backup programs like Acronis True Image and
Paragon. And when they work, they work well. But they don't work in all
conditions especially when restoring. Ghost is the only one that has
worked under all conditions so far. The only time Ghost messed up for me
was for Linux. But that could have been my fault for not cloning all
partitions.

I don't recall which version of Ghost started to need .NET2, but it was
somewhere around 2003 I believe. But Ghost.exe and Ghost32.exe don't
obviously. ;-)

--
Bill
Gateway M465e ('06 era) - Windows XP SP3

In an earlier contribution to this discussion,
BillW50 wrote:


Oh so you have both Ghost.exe and Ghost32.exe with Ghost 2003, right?


Dunno! Can't find Ghost32.exe per se in the Ghost folder in Program Files -
although there are lots of .exe files whose names start with Ghost - like
GhostStart.exe - and there's a file called gdisk32.exe

--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!