If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
8KNXP (Rev1) with RAID 0 & 1: DISK BOOT FAILURE
Hi,
I have been running the following system for a year & yesterday when the system restarted it said "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". The PC comprises: -------------------- Giga 8KNXP (Rev1) with 2.8GHz Iintel cpu 1 GB RAM 2 x Maxtor 120GB SATA disks in RAID1 using the onboard SilImage chip (this is the Boot C-drive mirrored) 2 x Maxtor 120GB SATA disks in RAID0 using the onbaord Intel ICH5R chip (this is the non-bootable striped drives) 1 x DVD-RW 1 x DVD/CD reader 1 x floppy drive 1 x ANTEC 550W power supply I did not change any BIOS/CMOS settings prior to the DISK BOOT FAILURE error. The only thing that initiated the system restart was Norton antivirus update of the antivirus data. At boot time, seems the RAID0 drives are still recgonised, but the RAID1 drives are not recognised (hence does not boot). There are no other cds/dvds/floppys in the other drives at boot time. I opened up the chasis and disconnected/reconnected the power-cables & data cables to & from the mobo to the 4 x harddisks; but this did not solve anything. I suspect that the Silicon Image controller on the mobo has failed! What do you think? I have several options: 1) buy an addon RAID1 controller card (eg PROMISE Fastrak S150 Tx4) & connect the 2 x RAID mirrored C-drives. 2) buy an ASUS mobo with equivalent onboard 4 x SATA with RAID1 & RAID0 support. **ps.- I understand from a retailer that the Giga8KNXP (Rev2) has been discontinued as a product. Does not speak well for a product that last just over a year & had so many BIOS fixes. My RAID0 drives actually contain a DRIVEIMAGE7 backup of the entire bootable C-drive. But my main concernroblem is that with any of the above 2 options, how do I keep all the data on all 4 xSATA disks intact when I reinstall them? Alterntatively, if I can keep the data on the RAID0 drives which have the DRIVEIMAGE7 backup of drive C, then hopefully I can reimage drive C when all the new hw is installed.... How do I do this? I appreciate any advice you gurus can provide please. Thanks Danny Tay |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Asus P4C800 Deluxe ATA SATA and RAID Promise FastTrack 378 Drivers and more. | Julian | Asus Motherboards | 2 | August 11th 04 12:43 PM |
P4P800DLX from non-raid to raid | Splitskull | Asus Motherboards | 2 | June 2nd 04 10:51 AM |
Disk Boot Failure problem | atDFN | General | 2 | February 8th 04 07:51 PM |
Boot Disk Failure | news.verizon.net | General | 2 | September 2nd 03 09:27 PM |
P4P800 and bios 1009.006, lost boot from hard disk on VIA raid | D. Vujaklija | Asus Motherboards | 0 | July 20th 03 09:16 PM |