If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
armada 7800
i hope someone here can help.. i have a 7800, the hardrive died on me, it has a dvd rom and no floppy i have got a new hardrive but i cannot get it to boot off the xp cd as it is set to boot of the hardrive. and doesnt go beyond that, it says no system drive..etc.. ok , how can i install the setup disk and the diag disk manually? can i make a partition on the drive in my other pc and then just copy the files there? or is that not possible. i have downloaded a personal computer diags disk maker appfrom compaqs hp website and run that to make the floppy , i also have the setup disk. this is what i have done. in a spare pc i have put the new hardrive on its own and tried to boot off the diag floppy.. no joy the floppy doesnt boot theres nothing on there to boot off anyway just the diag tools. so any info would be goood.. is there a way to set this drive up without the damn floppy drive? i have a floppy drive here but its a usb one and it wont boot off that as the damn bios is set up not to.. si -- pk1 |
#2
|
|||
|
|||
pk1 a écrit: i hope someone here can help.. i have a 7800, the hardrive died on me, it has a dvd rom and no floppy i have got a new hardrive but i cannot get it to boot off the xp cd as it is set to boot of the hardrive. and doesnt go beyond that, it says no system drive..etc.. ok , how can i install the setup disk and the diag disk manually? can i make a partition on the drive in my other pc and then just copy the files there? or is that not possible. i have downloaded a personal computer diags disk maker appfrom compaqs hp website and run that to make the floppy , i also have the setup disk. this is what i have done. in a spare pc i have put the new hardrive on its own and tried to boot off the diag floppy.. no joy the floppy doesnt boot theres nothing on there to boot off anyway just the diag tools. so any info would be goood.. is there a way to set this drive up without the damn floppy drive? i have a floppy drive here but its a usb one and it wont boot off that as the damn bios is set up not to.. si I think your best option is to get a 7700/7800 floppy drive frome Ebay (they are a lot of them for $10) and to boot from a setup floppy, which then offers a tool to create the diagnostcs partition on your new HDD. |
#3
|
|||
|
|||
In article , pk1
wrote: i hope someone here can help.. i have a 7800, the hardrive died on me, it has a dvd rom and no floppy i have got a new hardrive but i cannot get it to boot off the xp cd as it is set to boot of the hardrive. and doesnt go beyond that, it says no system drive..etc.. ok , how can i install the setup disk and the diag disk manually? can i make a partition on the drive in my other pc and then just copy the files there? or is that not possible. i have downloaded a personal computer diags disk maker appfrom compaqs hp website and run that to make the floppy , i also have the setup disk. this is what i have done. in a spare pc i have put the new hardrive on its own and tried to boot off the diag floppy.. no joy the floppy doesnt boot theres nothing on there to boot off anyway just the diag tools. so any info would be goood.. is there a way to set this drive up without the damn floppy drive? i have a floppy drive here but its a usb one and it wont boot off that as the damn bios is set up not to.. si Hello there, Have you tried going into SETUP (F10 on startup) and enabling MULTIBOOT. With MULTIBOOT, you should be able to boot off the DVD. Hope this helps, Guy |
#4
|
|||
|
|||
NoOne a écrit: Hello there, Have you tried going into SETUP (F10 on startup) and enabling MULTIBOOT. With MULTIBOOT, you should be able to boot off the DVD. Hope this helps, Guy Sure that will not work, because F10 invokes the setup program from the hidden partition on the original Compaq HD, which does not exist on the new HD. Without a fdd, it is possible to make a standard windows install on the HD on a desktop PC (with an 2,5" HD adapter), and then install the HD, make a safe mode start and install the drivers. HTH Jerome |
#5
|
|||
|
|||
jerome wrote:
NoOne a écrit: Hello there, Have you tried going into SETUP (F10 on startup) and enabling MULTIBOOT. With MULTIBOOT, you should be able to boot off the DVD. Hope this helps, Guy Sure that will not work, because F10 invokes the setup program from the hidden partition on the original Compaq HD, which does not exist on the new HD. Without a fdd, it is possible to make a standard windows install on the HD on a desktop PC (with an 2,5" HD adapter), and then install the HD, make a safe mode start and install the drivers. HTH Jerome For the Armada 7400 and 7800: The "reset button" is CTRL+SHIFT+F11 all at once AS SOON as you hit the Power ON button. This will reset the CMOS settings, and i believe the PC will boot from CDROM as default. Yes, I know I'm 14 days late... Arne. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Armada 7800 wont boot | G. Morgan | Compaq Computers | 8 | November 1st 04 01:28 AM |
Dell Margi DVD-to-go in Compaq Armada 7800 | Peter Rega | Compaq Computers | 0 | October 25th 04 03:15 AM |
Armada 7800 CMOS entry? Which key? | Ritual | Compaq Computers | 3 | July 3rd 04 05:47 AM |
Armada 7800 PII 233 w/ Docking station not staring up. Help needed ASAP | TPA | Compaq Computers | 0 | October 9th 03 11:29 PM |
Compaq Armada 7800 will not start with battery | Damien | Compaq Computers | 4 | July 27th 03 10:48 AM |