If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Restore Diskette needed
Anyone know where I could download a Master Restore
Diskette Ver 1.27. System has windows 98, Pentium II, 266 processor, Packard Bell Multimedia 730. Any help is appreciated. thanks! remove NoJunk to email me |
#2
|
|||
|
|||
I think I have it some where
I just do not know where I think that ver 1.2 361-00033-001 will work with it or I have a boot floppy and I am sure that Simon can steer you to it also for Systems produced after July 1999 The master restore floppy should be on the master CD as an image file (.img) about 900KB It is often called Osboot "NoJunk" wrote in message ... Anyone know where I could download a Master Restore Diskette Ver 1.27. System has windows 98, Pentium II, 266 processor, Packard Bell Multimedia 730. Any help is appreciated. thanks! remove NoJunk to email me |
#3
|
|||
|
|||
I have the original master restore floppy and master CD. It's been so long I
couldn't remember quite how to do it. I thought all I had to do was put in the Master CD and it would prompt me from there but it doesn't. All I can do is see the folders. Don't know how to start the actual restore. I put my floppy in but wasn't sure what to do or if my floppy was corrupted. Meanwhile as I'm here writing this, I turned on the computer I'm trying to restore and it's saying "Missing operating system". Doesn't sound good. I had gotten some spyware on it and couldn't seem to remove it so I decided to just restore because it had been a while since I had. Any suggentions? thanks guys! I think I have it some where I just do not know where I think that ver 1.2 361-00033-001 will work with it or I have a boot floppy and I am sure that Simon can steer you to it also for Systems produced after July 1999 The master restore floppy should be on the master CD as an image file (.img) about 900KB It is often called Osboot "NoJunk" wrote in message ... Anyone know where I could download a Master Restore Diskette Ver 1.27. System has windows 98, Pentium II, 266 processor, Packard Bell Multimedia 730. Any help is appreciated. thanks! remove NoJunk to email me remove NoJunk to email me |
#4
|
|||
|
|||
Try this see if you can boot with floppy only
If you are able Boot with the floppy no CD When it cmoes to the screen to insert Master CD or whateverHit escape It should come to an A prompt At the A prompt type format c: Let it format the drive It will put command com on the HD which is the most simple OS When done boot again with floppy and master CD and pray of course If it does not boot I will send you a restore floppy by email "Pop12u2" wrote in message ... I have the original master restore floppy and master CD. It's been so long I couldn't remember quite how to do it. I thought all I had to do was put in the Master CD and it would prompt me from there but it doesn't. All I can do is see the folders. Don't know how to start the actual restore. I put my floppy in but wasn't sure what to do or if my floppy was corrupted. Meanwhile as I'm here writing this, I turned on the computer I'm trying to restore and it's saying "Missing operating system". Doesn't sound good. I had gotten some spyware on it and couldn't seem to remove it so I decided to just restore because it had been a while since I had. Any suggentions? thanks guys! I think I have it some where I just do not know where I think that ver 1.2 361-00033-001 will work with it or I have a boot floppy and I am sure that Simon can steer you to it also for Systems produced after July 1999 The master restore floppy should be on the master CD as an image file (.img) about 900KB It is often called Osboot "NoJunk" wrote in message ... Anyone know where I could download a Master Restore Diskette Ver 1.27. System has windows 98, Pentium II, 266 processor, Packard Bell Multimedia 730. Any help is appreciated. thanks! remove NoJunk to email me remove NoJunk to email me |
#5
|
|||
|
|||
This is what I get when I try yo boot with the floppy only:
Starting Windows 98... The following file is missing or corrupted: EMM386.EXE There is a error in your CNFIG.SYS file on line 2 The following file is missing or corrupted: COMMAND.COM Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) A Not quite sure where to go from here. If you think your restore floppy will work for me email it if possible. thanks! Try this see if you can boot with floppy only If you are able Boot with the floppy no CD When it cmoes to the screen to insert Master CD or whateverHit escape It should come to an A prompt At the A prompt type format c: Let it format the drive It will put command com on the HD which is the most simple OS When done boot again with floppy and master CD and pray of course If it does not boot I will send you a restore floppy by email "Pop12u2" wrote in message ... I have the original master restore floppy and master CD. It's been so long I couldn't remember quite how to do it. I thought all I had to do was put in the Master CD and it would prompt me from there but it doesn't. All I can do is see the folders. Don't know how to start the actual restore. I put my floppy in but wasn't sure what to do or if my floppy was corrupted. Meanwhile as I'm here writing this, I turned on the computer I'm trying to restore and it's saying "Missing operating system". Doesn't sound good. I had gotten some spyware on it and couldn't seem to remove it so I decided to just restore because it had been a while since I had. Any suggentions? thanks guys! I think I have it some where I just do not know where I think that ver 1.2 361-00033-001 will work with it or I have a boot floppy and I am sure that Simon can steer you to it also for Systems produced after July 1999 The master restore floppy should be on the master CD as an image file (.img) about 900KB It is often called Osboot "NoJunk" wrote in message ... Anyone know where I could download a Master Restore Diskette Ver 1.27. System has windows 98, Pentium II, 266 processor, Packard Bell Multimedia 730. Any help is appreciated. thanks! remove NoJunk to email me remove NoJunk to email me remove NoJunk to email me |
#6
|
|||
|
|||
Zip the restore floppy and send it to me
make sure you send the hidden folders also If not possible send me one file at a time Off hand it sounds like a bad floppy or bad config sys By the way did you look for the image file on the master CD "Pop12u2" wrote in message ... This is what I get when I try yo boot with the floppy only: Starting Windows 98... The following file is missing or corrupted: EMM386.EXE There is a error in your CNFIG.SYS file on line 2 The following file is missing or corrupted: COMMAND.COM Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) A Not quite sure where to go from here. If you think your restore floppy will work for me email it if possible. thanks! Try this see if you can boot with floppy only If you are able Boot with the floppy no CD When it cmoes to the screen to insert Master CD or whateverHit escape It should come to an A prompt At the A prompt type format c: Let it format the drive It will put command com on the HD which is the most simple OS When done boot again with floppy and master CD and pray of course If it does not boot I will send you a restore floppy by email "Pop12u2" wrote in message ... I have the original master restore floppy and master CD. It's been so long I couldn't remember quite how to do it. I thought all I had to do was put in the Master CD and it would prompt me from there but it doesn't. All I can do is see the folders. Don't know how to start the actual restore. I put my floppy in but wasn't sure what to do or if my floppy was corrupted. Meanwhile as I'm here writing this, I turned on the computer I'm trying to restore and it's saying "Missing operating system". Doesn't sound good. I had gotten some spyware on it and couldn't seem to remove it so I decided to just restore because it had been a while since I had. Any suggentions? thanks guys! I think I have it some where I just do not know where I think that ver 1.2 361-00033-001 will work with it or I have a boot floppy and I am sure that Simon can steer you to it also for Systems produced after July 1999 The master restore floppy should be on the master CD as an image file (.img) about 900KB It is often called Osboot "NoJunk" wrote in message ... Anyone know where I could download a Master Restore Diskette Ver 1.27. System has windows 98, Pentium II, 266 processor, Packard Bell Multimedia 730. Any help is appreciated. thanks! remove NoJunk to email me remove NoJunk to email me remove NoJunk to email me |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
System Restore Problem | KA6UUP | Dell Computers | 0 | October 18th 04 03:01 PM |
Quick Restore CD | [email protected] | Compaq Computers | 9 | September 18th 04 12:27 PM |
make your own Restore partition | Timothy Daniels | Dell Computers | 1 | August 27th 04 11:01 PM |
Compaq Presario 6000 restore problem. | Gary | Compaq Computers | 10 | May 22nd 04 09:06 PM |
Need help: System Restore malfunction | HistoryFan | Dell Computers | 18 | February 6th 04 10:04 PM |