If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
6600GT svideo out problem update
Hi, I own a Sparkle 6600GT and I dunno why I can't see my pc on my LCD-TV
using the s-video out. I used: s-video out jack to 2 RCA the above are connected to a s-video/RCA - SCART adapter. This adapter is then connected to an A/V WiFi transmitter/reciever 2,4Ghz 4channel system. If I connect the output of my camcorder to the s-video/RCA - SCART adapter and to the rest of the system everything works fine. The problem has -obviously- something to do with the videocard's output signal. I silmply wanted to add that I've never connected the SCART adapter to the LCD TV directly... Do you think that's why the videocard doesn't recognise the tv??? Can anyone help me, please? Thanks, PK ps.I'm using 71.81 |
#2
|
|||
|
|||
The TV out is enabled only when it detects a TV connected based on the
resistance (impedance) on the connector. It's possible yer WiFI transmitter doesn't have the same impedance as a TV. There is an option in the nVidia display applet under "Tools" at the bottom under "Troubleshooting" where it says "Force TV detection" Tick this and see if it works. "[FW Paperinik.pk]" wrote in message .. . Hi, I own a Sparkle 6600GT and I dunno why I can't see my pc on my LCD-TV using the s-video out. I used: s-video out jack to 2 RCA the above are connected to a s-video/RCA - SCART adapter. This adapter is then connected to an A/V WiFi transmitter/reciever 2,4Ghz 4channel system. If I connect the output of my camcorder to the s-video/RCA - SCART adapter and to the rest of the system everything works fine. The problem has -obviously- something to do with the videocard's output signal. I silmply wanted to add that I've never connected the SCART adapter to the LCD TV directly... Do you think that's why the videocard doesn't recognise the tv??? Can anyone help me, please? Thanks, PK ps.I'm using 71.81 |
#3
|
|||
|
|||
Well...maybe I'll have to take the pc to the other corner of the house but
I'm trying to avoid this. Do you think that the tv-out isn't enabled until the card/software don't see the tv *phisically*? Because I've enabled the tv-out, made all the settings (res/freq/bpp) but I still can't see anyhting on the tv. (I've tryed many configs....) What makes me think is that using the camcorder s-video out everyhting works fine. Can you tell me what are the *standard* settings? I think that the best/safer is 800x600x16 @ 60hz.... Any ideas? Thank you all. "Sharanga Dayananda" wrote in message ... The TV out is enabled only when it detects a TV connected based on the resistance (impedance) on the connector. It's possible yer WiFI transmitter doesn't have the same impedance as a TV. There is an option in the nVidia display applet under "Tools" at the bottom under "Troubleshooting" where it says "Force TV detection" Tick this and see if it works. "[FW Paperinik.pk]" wrote in message .. . Hi, I own a Sparkle 6600GT and I dunno why I can't see my pc on my LCD-TV using the s-video out. I used: s-video out jack to 2 RCA the above are connected to a s-video/RCA - SCART adapter. This adapter is then connected to an A/V WiFi transmitter/reciever 2,4Ghz 4channel system. If I connect the output of my camcorder to the s-video/RCA - SCART adapter and to the rest of the system everything works fine. The problem has -obviously- something to do with the videocard's output signal. I silmply wanted to add that I've never connected the SCART adapter to the LCD TV directly... Do you think that's why the videocard doesn't recognise the tv??? Can anyone help me, please? Thanks, PK ps.I'm using 71.81 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Presario 2110ca bios update problem | TPG71 | Compaq Computers | 0 | May 25th 04 02:41 PM |
This problem has baffled everyone... | Nick G | General | 46 | May 22nd 04 04:01 AM |
Problem with 9600 Pro Install - Update | Tim W. | Ati Videocards | 0 | January 23rd 04 04:10 PM |
How do YOU keep up with all Microsoft patches and bug fixes? | Steve | Dell Computers | 20 | September 15th 03 11:28 PM |
Boot Problem after update to P09 | Alois Brandl | Intel | 1 | July 15th 03 06:01 PM |