A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Storage & Hardrives
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Is there a 3tB or larger SATA drive that can be jumpered or set to show as about 2tB?



 
 
Thread Tools Display Modes
  #1  
Old July 29th 11, 05:59 PM posted to comp.arch.storage
Mark F[_2_]
external usenet poster
 
Posts: 164
Default Is there a 3tB or larger SATA drive that can be jumpered or set to show as about 2tB?

Is there a 3TB drive that can be "jumpered" or set by software to
show up as only about 2tB?

I need to use my existing stand-alone utilities and computers, which
only support 2TB drives, so software like what Seagate describes in:

http://www.seagate.com/docs/pdf/whit..._1_barrier.pdf
"Break the 2.1TB Barrier With Barracuda XT Drives and DiscWizard
Software", MB615.1-1102US, February 2011
doesn't help me.

Seagate says that none of the disks:
Barracuda XT ST33000651A
Constellation ES.2 ST33000650NS
Constellation ES.2 ST33000651NS
can be set to 2TB by jumpering or by using a program to set drive
configuration options.

I found a manual at:

http://www.seagate.com/staticfiles/s...100628615d.pdf
"Seagate Product Manual Constellation ES.2 SAS", Rev. D,
that covers the SAS version (ST33000650SS, ST33000651SS) of the
Constellation drives that I am interested in, that says that it might
be possible, with appropriate software, to do what I want with SAS
drives by using the SAS command "Mode Select (6)"
[section 4.6 "Programmable drive capacity", Page 9]

Does anyone know of any hardware to make an SAS drive behave like a
SATA drive? If such hardware existed and I could find software to use
the appropriate Mode Select command, then I could setup a system with
an SAS adapter, set the capacity of each new drive, then use it as an
SATA drive with the lower capacity that I need.

Thanks.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Software to copy 2tb 5400 rpm drive to 2tb 7200 rpm drive under XP home SP3 Daniel Prince Storage (alternative) 3 June 12th 11 07:07 AM
3TB drive access from XP over a network [email protected] Storage (alternative) 20 May 8th 09 07:11 PM
IDE/SATA drive mix can't set boot drive [email protected] General 7 April 29th 07 01:08 AM
Getting new SATA drive to show up Cronzor Homebuilt PC's 18 December 18th 06 09:04 PM
Getting new SATA drive to show up Cronzor General 5 December 2nd 06 08:29 AM


All times are GMT +1. The time now is 03:11 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 HardwareBanter.
The comments are property of their posters.