If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Just built a new PC and it will not boot
Just bought a new
Case: V-TECH 8877K http://www.vtech.com.tw/Products/cas....asp?number=58 Motherboard: ASUS P4S800 http://www.asus.com/products/mb/sock...0/overview.htm CPU: INTEL SL6WG http://processorfinder.intel.com/scr...WG&ProcFam=483 &PkgType=ALL&SysBusSpd=6107&CorSpd=6088 Ram: 2 x ELIXIR 512MB DDR -400MHz -CL3 PC3200U -30330 Part Number: M2U51264DS8HB3G-5T http://www.infineon.com/cgi/ecrm.dll...oid=30466&cat_ oid=-8005 Graphics Card: POWERCOLOR RADEON 9600 R96-D3GN\ http://www.powercolor.com.tw/page2/p...id=176&id=1&sn =176&temp1=2 The first thing that I really need to check is that all this crap is compatible??? Or have I been sold components which will not work together? Put the jigsaw together and it will physically 'turn on' but not boot. By that I mean that the power button will turn on and the the Case power light will come on. The Motherboard will spring to life (it has an LED) The CPU fan will start (as will the power supply fan) But that is the end of it. The monitor does not switch from standby (The led should go from orange to green) The keyboard will not light up -referring to the CAPS lock . (Nor can I get the caps lock to function) I do not know what can cause such a fundamental failure. If I could get to BIOS - I would have somewhere to start but cannot even get that far. I have tried with just one stick of RAM (in case one is faulty) and I have tried each stick in each of the three sockets - Makes no difference. Any ideas |
#2
|
|||
|
|||
I just found our from:
http://www.asus.com.tw/support/cpusu...px?MB=P4S800&C PU=P4-3.20%20GHz(800%20MHz%20FSB)%20(HyperThreading)&BIO S=1003 That my motherboard has supported my CPU since BIOS version 1003. If my BIOS is earlier then I will not be able to boot right? SO how do I check my BIOS version? ASUS tell me to check the BIOS version displayed on the screen during bootup....... and we all know that I cannot boot up, so..... "·´¯`·.¸¸.·´¯`Dingbat·´¯`·.¸¸.·´¯`" wrote in message ... Just bought a new Case: V-TECH 8877K http://www.vtech.com.tw/Products/cas....asp?number=58 Motherboard: ASUS P4S800 http://www.asus.com/products/mb/sock...0/overview.htm CPU: INTEL SL6WG http://processorfinder.intel.com/scr...WG&ProcFam=483 &PkgType=ALL&SysBusSpd=6107&CorSpd=6088 Ram: 2 x ELIXIR 512MB DDR -400MHz -CL3 PC3200U -30330 Part Number: M2U51264DS8HB3G-5T http://www.infineon.com/cgi/ecrm.dll...oid=30466&cat_ oid=-8005 Graphics Card: POWERCOLOR RADEON 9600 R96-D3GN\ http://www.powercolor.com.tw/page2/p...id=176&id=1&sn =176&temp1=2 The first thing that I really need to check is that all this crap is compatible??? Or have I been sold components which will not work together? Put the jigsaw together and it will physically 'turn on' but not boot. By that I mean that the power button will turn on and the the Case power light will come on. The Motherboard will spring to life (it has an LED) The CPU fan will start (as will the power supply fan) But that is the end of it. The monitor does not switch from standby (The led should go from orange to green) The keyboard will not light up -referring to the CAPS lock . (Nor can I get the caps lock to function) I do not know what can cause such a fundamental failure. If I could get to BIOS - I would have somewhere to start but cannot even get that far. I have tried with just one stick of RAM (in case one is faulty) and I have tried each stick in each of the three sockets - Makes no difference. Any ideas |
#3
|
|||
|
|||
There is a sticker on the BIOS chip. 1005 - SO there goes that theory.
"·´¯`·.¸¸.·´¯`Dingbat·´¯`·.¸¸.·´¯`" wrote in message ... I just found our from: http://www.asus.com.tw/support/cpusu...px?MB=P4S800&C PU=P4-3.20%20GHz(800%20MHz%20FSB)%20(HyperThreading)&BIO S=1003 That my motherboard has supported my CPU since BIOS version 1003. If my BIOS is earlier then I will not be able to boot right? SO how do I check my BIOS version? ASUS tell me to check the BIOS version displayed on the screen during bootup....... and we all know that I cannot boot up, so..... "·´¯`·.¸¸.·´¯`Dingbat·´¯`·.¸¸.·´¯`" wrote in message ... Just bought a new Case: V-TECH 8877K http://www.vtech.com.tw/Products/cas....asp?number=58 Motherboard: ASUS P4S800 http://www.asus.com/products/mb/sock...0/overview.htm CPU: INTEL SL6WG http://processorfinder.intel.com/scr...WG&ProcFam=483 &PkgType=ALL&SysBusSpd=6107&CorSpd=6088 Ram: 2 x ELIXIR 512MB DDR -400MHz -CL3 PC3200U -30330 Part Number: M2U51264DS8HB3G-5T http://www.infineon.com/cgi/ecrm.dll...oid=30466&cat_ oid=-8005 Graphics Card: POWERCOLOR RADEON 9600 R96-D3GN\ http://www.powercolor.com.tw/page2/p...id=176&id=1&sn =176&temp1=2 The first thing that I really need to check is that all this crap is compatible??? Or have I been sold components which will not work together? Put the jigsaw together and it will physically 'turn on' but not boot. By that I mean that the power button will turn on and the the Case power light will come on. The Motherboard will spring to life (it has an LED) The CPU fan will start (as will the power supply fan) But that is the end of it. The monitor does not switch from standby (The led should go from orange to green) The keyboard will not light up -referring to the CAPS lock . (Nor can I get the caps lock to function) I do not know what can cause such a fundamental failure. If I could get to BIOS - I would have somewhere to start but cannot even get that far. I have tried with just one stick of RAM (in case one is faulty) and I have tried each stick in each of the three sockets - Makes no difference. Any ideas |
#4
|
|||
|
|||
You most likly have a video related issue. Reseat the video card,
check to make sure you havn't bent any pins in the connector. Do you get any beeps while the PC is trying to boot? Can you hear or feel the hard drives spin up? If your getting no beeps during boot up and the drives are spining up you almost for sure have a video problem. "·´¯`·.¸¸.·´¯`Dingbat·´¯`·.¸¸.·´¯`" wrote in message ... There is a sticker on the BIOS chip. 1005 - SO there goes that theory. "·´¯`·.¸¸.·´¯`Dingbat·´¯`·.¸¸.·´¯`" wrote in message ... I just found our from: http://www.asus.com.tw/support/cpusu...px?MB=P4S800&C PU=P4-3.20%20GHz(800%20MHz%20FSB)%20(HyperThreading)&BIO S=1003 That my motherboard has supported my CPU since BIOS version 1003. If my BIOS is earlier then I will not be able to boot right? SO how do I check my BIOS version? ASUS tell me to check the BIOS version displayed on the screen during bootup....... and we all know that I cannot boot up, so..... "·´¯`·.¸¸.·´¯`Dingbat·´¯`·.¸¸.·´¯`" wrote in message ... Just bought a new Case: V-TECH 8877K http://www.vtech.com.tw/Products/cas....asp?number=58 Motherboard: ASUS P4S800 http://www.asus.com/products/mb/sock...0/overview.htm CPU: INTEL SL6WG http://processorfinder.intel.com/scr...WG&ProcFam=483 &PkgType=ALL&SysBusSpd=6107&CorSpd=6088 Ram: 2 x ELIXIR 512MB DDR -400MHz -CL3 PC3200U -30330 Part Number: M2U51264DS8HB3G-5T http://www.infineon.com/cgi/ecrm.dll...oid=30466&cat_ oid=-8005 Graphics Card: POWERCOLOR RADEON 9600 R96-D3GN\ http://www.powercolor.com.tw/page2/p...id=176&id=1&sn =176&temp1=2 The first thing that I really need to check is that all this crap is compatible??? Or have I been sold components which will not work together? Put the jigsaw together and it will physically 'turn on' but not boot. By that I mean that the power button will turn on and the the Case power light will come on. The Motherboard will spring to life (it has an LED) The CPU fan will start (as will the power supply fan) But that is the end of it. The monitor does not switch from standby (The led should go from orange to green) The keyboard will not light up -referring to the CAPS lock . (Nor can I get the caps lock to function) I do not know what can cause such a fundamental failure. If I could get to BIOS - I would have somewhere to start but cannot even get that far. I have tried with just one stick of RAM (in case one is faulty) and I have tried each stick in each of the three sockets - Makes no difference. Any ideas |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't boot from CD | Zotin Khuma | General | 6 | November 16th 04 10:18 PM |
Disk boot failure insert system disk and press enter | Lambo | Homebuilt PC's | 4 | October 14th 04 01:42 AM |
NF7 Boot SATA | systrade | Abit Motherboards | 0 | September 29th 04 10:47 AM |
Boot problem with Promise SATA Fasttrack S150TX2 Plus | Wizard | General | 0 | September 13th 04 06:54 PM |
Presario 7360 missing BIOS CDROM boot option | Richard Hurt | Compaq Computers | 2 | December 9th 03 10:11 PM |