A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Printers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

HP2000 New Ink Well Assembly Installed



 
 
Thread Tools Display Modes
  #1  
Old June 28th 03, 01:15 AM
Bob Van der Bloemen
external usenet poster
 
Posts: n/a
Default HP2000 New Ink Well Assembly Installed

Original Problem: Cyan bongo pad bad - cyan reads empty and printer will not
print..

New ink well assembly installed without a hitch and the printer is working
like new. However, the cyan cartridge still reads empty and I know that it
is half full. My guess is that the smart chip on the cyan cartridge has
recorded the out of ink message from the time the bongo pad originally
failed. If this is the case I do not think that there's a way to
correct/reset the cyan ink level. Or, is there?

Does anyone know if the cartridge will continue to print until it is
actually empty despite the erroneous visual cyan indicator? I believe this
printer has another way of reading the cartridge ink level by monitoring
internal cartridge pressure? Just guessing here...I guess time will tell.
If someone knows the mechanism behind this I would like to hear more about
this....

Signed just curious.

Ciao,

Bob


  #2  
Old June 28th 03, 02:23 AM
jsmith
external usenet poster
 
Posts: n/a
Default

Correct on all assumptions. Continue using the cartridge until it runs out
of ink, or until the printer fails again with another problem, then toss
it......
"Bob Van der Bloemen" wrote in message
. ..
Original Problem: Cyan bongo pad bad - cyan reads empty and printer will

not
print..



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newly Installed 9600XT!! Ron Ati Videocards 4 January 31st 04 08:07 PM
GA8KNXP: installed latest Si3112 driver & now cannot boot from RAID1. Danny TAY Gigabyte Motherboards 9 January 22nd 04 04:30 AM
Can Roxio and Nero be installed on the same machine. Ken Applequist Cdr 7 January 17th 04 12:28 PM
ATI All In Wonder installed but NO TUNER! Pim Ati Videocards 3 December 4th 03 02:30 AM
I`m just seeing negative stuff about 3.9 - Some have installed them successfully and happily?? Melandre Ati Videocards 7 November 11th 03 06:30 AM


All times are GMT +1. The time now is 09:49 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.