IDE Cable required for CD-ROM?

Is there any speed advantage in using 80 wire IDE cables for CD-ROM, DVD-ROM
or CD-RW, or will they still operate at the same speed as they would via a
40 wire IDE cable?

"Gilligan Monger" wrote in message
. au...
Is there any speed advantage in using 80 wire IDE cables for CD-ROM,
DVD-ROM
or CD-RW, or will they still operate at the same speed as they would via a
40 wire IDE cable?

YEAH IN MY OPINION THEY WOULD STILL BE AT THE SAME SPEED UDMA 3 OR 4 I THINK
LONG TIME SINCE IVE HAD TO REMEMBER THIS LOL
HOPE I HELPED :0)

LATES.

No speed advantage for a CD drive. Might increase signal strength since the
middle wires are grounded at the mobo side. If you have more than one CD you can
use the CS on both of them instead of setting one as master and other as slave.
Due to the gound plane of the other 4 wires, it might solve or prevent any
problems from CD to CDR copy that sometimes plague the 40 wire cables. For 80
wire the blue plug is to the motherboard IDE, too often that is not realized.

Barry OGrady wrote:

On Mon, 14 Jul 2003 21:32:45 +1000, "Gilligan Monger" wrote:

Is there any speed advantage in using 80 wire IDE cables for CD-ROM, DVD-ROM
or CD-RW, or will they still operate at the same speed as they would via a
40 wire IDE cable?

Same speed.

-Barry
========
Web page: http://members.optusnet.com.au/~barry.og
Atheist, radio scanner, LIPD information.
Voicemail/fax number +14136227640