If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Alchohol flushes out clotted jet heads.
I wish I could give his name, but thank you to whoever suggested a
paper towel with cleaing "fluid" under the inkjet print heads. It worked. This time it was an Epson but I think it would work for anything. I had tried head cleaning and the other thing several times with no improvement. I really hated the idea of buying a whole new printer, and sending it in to be repaired would probably cost as much, and I thought about disassembling it but some webpage said you need a calibration CD to get it right again. Now I have disassembled some precise things and gotten them back together by just noting the discolored area where the light hit part and not the assembled part, and better yet by scribing a scratch the whole length of the line where the two parts come together, to allign with. And by being careful about everything, but that was machinery and car stuff, nothing where the width of a pixel could make a difference. OTOH, it seems to me that as long as the box holding the 4 ink cartridges is square, if it's moved a couple pixels to the left or forward or back, that will just move the image on the paper a couple pixels but everything will look fine. In this case I would scribe both on the front or back and the left or right of that box. And I can't believe I won't get the box square, at least on the second try. Are the screw-attachment holes elongated or extra large or are they just the right size? I also wondered if my use of bootleg ink had caused the problem. The first set of cartridges worked fine, but when I put in the the second black one and maybe one other color, it said that the cartidges weren't recognized. That's anti-bootlegger talk where I come from. I wondered how I got past the first ones. But when I googled, it said that Epson printers sometimes gave a Not Recognized message just because the cartridge was empty. I wonder if they do that on purpose to scare people like me. I also wondered why only the yellow came out when I did that test pattern print, since I had just replaced black, and black had been used frequently. OTOH, when I wasnt' printing at all, I was careful to print one picture in all colors every two months, and since I've been printing a lot of black and white, I pretty much stopped doing that. How often do you folks think something in color should be printed to keep color jets to keep them from drying out?? I used part of a Bounty towel, because they really are the best. They hold more liquid. Hard to believe that their advertising is so accurate, but if there is a competitor that does as well, I haven't noticed it, and I do buy cheaper ones to use with more sludge and sediment than liquid, or with things that aren't very wet. . And ammonia was only 1.5 dollars but I didn't know what I would with a 16 oz. bottle after I used a quarter of an ounce, so I skipped that. I have windex, but it's lost in the jungle that is my house. And dish soap didn't seem like a good idea to me, though maybe I'm wrong and in a worse situation I would have needed it. And somewhere, not here, I read that one had to use 92% alcohol, but that struck me as silly, so I used the 70% that I already had and which is quite a bit cheaper. I'm curious where 92% is relly required? (Alcohol is hydrophilic and the process of detaching the water molecules from the alchohol is difficult, although I suppose the attached water of hydration weakens the effect of the alocohol, he said, arguing against his prior claim that it was silly.) I tore a strip as wide as the flat area where the heads went, folded it once over a piece of paper that I used to push everything under the heads. I should have measured the width of the heads and marked that on the paper towel, so I'd know when I had it in far enough, because it was hard to push it in. I will use slightly stiffer paper next time to better push in the towel, though of course it can't be very thick. I removed the paper. To allow more of the paper towel to soak up more alcohol, but it might have been better to at first leave the paper in to push the upper level of the towel closer to the ink head. Then it could be removed so that the lower layer of towel could free up its alchohol into the upper layer. I found a syringe-like thing that came with some universal ink that I never managed to use, and now I don't think it's powerful enough?? to get it in to those new fancy cartridges. At least I only paid half price, second-hand but never used, at a hamfest. I poured the alcohol into a cup which was shallow enough that the "needle" of the bellows thing would reach, then soaked almost to overflowing the part of the paper towel that still stuck out, almost 2 inches. I also used the needle to try to put some alcohol into the nozzles from above, where the cartridges attached, the two colors that were not working at all, but on this Epson Workforce 645, there is no hole at the end, rather there is an + shaped cut from the end going down 2 or 3 mm. And I was relying even more on capillary action to get any alcohol in there. I didn't see any alchohol running down the outside of the little black tube, so maybe much of it was getting sucked into the tube. I waited 20 minutes. The paper was still wet but I was certain a lot had evaporated and I added about 50% as much as before, or more. Then waited about 20 or 30 more minutes Then I put the two new cartridges for those same colors, because the others were listed as empty. Then I printed a page and it was mostly red and maybe some other color. So I cleaned the heads one more time, but then it worked! And it prints beautiful again. The previous ink came from Tinte, but Amazon no longer has it and I can't find it anywhere else. This time I bought something from Office World, but I haven't used any yet. Yesterday for the first time, I used the automatic document feeder on a similar Brother machine and it worked 98% as well as on some big office machine. And I should have been able to figure out without watching how a small machine makes two sided copies, but I didn.t |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
print heads | WindStormReigns | Printers | 11 | June 20th 07 12:59 PM |
Heads Up - CoolestPC.co.uk | UK Computer Vendors | 2 | November 6th 06 11:56 AM | |
Clogged Epsons flushes like clappers.! | Davy | Printers | 31 | March 18th 06 11:35 AM |
cleaning hp heads | a concerned member of the usenet community | Printers | 3 | July 12th 05 02:36 PM |
jet heads refilling | uplbet | Printers | 2 | February 9th 04 08:02 PM |