If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Newbie in the group-first OC experience (Athlon XP2200+ @ 2166 Mhz)
Hi there,
Just thought I would like to share the results of some extensive web surfing and thanks to all who give invaluable info here in the groups, because you enable ignorants like me to build OCed computers :-) OK, my set-up is : Asus A7m8x-x AMD Athlon XP 2200+ TwinMOS DDR PC3200 512 Mb (2.5 RAS CAS delay, whatever that is, don't know if I got this right) CPU Cooler: Thermaltake Volcano 7+ Plus a nice looking box, the "Cheapo" with transparent side pannel, lateral fan, blue neon at the front, 400 W generic supply. OK, the story is: I finally got time to buy the rest of the parts and assemble. I knew exactly how it should be assembled, so that was totally straightforward. Then, I gave in the BIOS the 13 multiplier (default 13.5) and 166 FSB (default 133). It was as planned from weeks in advance, no problem. Then I check temperatu 27 Celsius in idle (my Athlon 1Ghz shoots up to 40 Celsius). Next step: I am smiling, I try 13.5 and FSB 166. No booting to Windoze...(f**k)I get back in BIOS. Then my mind goes into kamikaze mode and I try something stupid like 200 FSB with 11 multiplier. Then the BIOS refused to heed my commands, I tried flashing and it refused to see the BIOS file in the floppy, a nightmare for two hours. I got corrupted BIOS screens, like screens that show half the options in a menu. After some desperate tries to flash, the Mobo does somthing weird, and the bootup test says something like "1350 Athlon XP , 200 Mhz FSB". This time BIOS works correct and I set my computer back into the 2166 Mhz, or 2700+ rating. Then everything goes fine. My take: the feature that Asus put to restore BIOS settings in case of wrong OC parameters is badly implemented. Instead of solving the problem it causes other altogether different (and very strange) ones. I hope this helps someone... Cheers, Miguel |
#2
|
|||
|
|||
M Arino wrote:
Hi there, Just thought I would like to share the results of some extensive web surfing and thanks to all who give invaluable info here in the groups, because you enable ignorants like me to build OCed computers :-) OK, my set-up is : Asus A7m8x-x AMD Athlon XP 2200+ TwinMOS DDR PC3200 512 Mb (2.5 RAS CAS delay, whatever that is, don't know if I got this right) CPU Cooler: Thermaltake Volcano 7+ Plus a nice looking box, the "Cheapo" with transparent side pannel, lateral fan, blue neon at the front, 400 W generic supply. OK, the story is: I finally got time to buy the rest of the parts and assemble. I knew exactly how it should be assembled, so that was totally straightforward. Then, I gave in the BIOS the 13 multiplier (default 13.5) and 166 FSB (default 133). It was as planned from weeks in advance, no problem. Then I check temperatu 27 Celsius in idle (my Athlon 1Ghz shoots up to 40 Celsius). Next step: I am smiling, I try 13.5 and FSB 166. No booting to Windoze...(f**k)I get back in BIOS. Then my mind goes into kamikaze mode and I try something stupid like 200 FSB with 11 multiplier. Then the BIOS refused to heed my commands, I tried flashing and it refused to see the BIOS file in the floppy, a nightmare for two hours. I got corrupted BIOS screens, like screens that show half the options in a menu. After some desperate tries to flash, the Mobo does somthing weird, and the bootup test says something like "1350 Athlon XP , 200 Mhz FSB". This time BIOS works correct and I set my computer back into the 2166 Mhz, or 2700+ rating. Then everything goes fine. My take: the feature that Asus put to restore BIOS settings in case of wrong OC parameters is badly implemented. Instead of solving the problem it causes other altogether different (and very strange) ones. That's because attempting to flash the BIOS while it's loaded up with invalid CPU clock parameters is NOT a 'feature' for restoring bad overclock settings. If the CPU won't run then it can't do a flash either because that requires a working CPU. You should NEVER attempt a flash unless the processor is 100% stable and the surest way to do that is to use the stock settings. Depending on the motherboard there are a number of 'restore default parameters' mechanisms but one that always works is to clear CMOS. It sounds like your Asus also implements the "X failed boot attempts" check to reset parameters and would be why, after a while, it 'did something weird' and defaulted to a 'safe' 13.5 at 200 MHz FSB. I hope this helps someone... Cheers, Miguel |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pentium 4 vs. Athlon XP vs. Athlon 64's | MarkW | General | 2 | October 10th 06 12:11 PM |
Newbie: How much faster is the FX-53 than the Athlon 3200 ? | Steve H. | AMD x86-64 Processors | 2 | July 23rd 04 08:05 PM |
Newbie: OC Athlon 2400+ XP & Asus A7V600 Board | Patrick Tite | Overclocking AMD Processors | 3 | January 16th 04 06:28 AM |
Slowest Athlon 64 humbles fastest P4 in gaming | Tone-EQ | Overclocking AMD Processors | 1 | December 15th 03 04:09 PM |
AMD Athlon 64FX first impressions | Chris | General | 14 | September 29th 03 02:22 PM |