If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Overclocking X2 4400+ K8N Neo4 Plat.
Hey gang,
I seem to have finally, after a few months,gotten my system stable. Mainly, by upping the voltage on my Corsair ram go 2.8v Now, I am ready to start tweaking this puppy. System : MSI K8N Neo4 Plat mb Athlon X2 4400+ dual core 2 gb Corsair 3500LL Pro dual channel ram ( 2x1gb) Saphire X850XT PCIe video card I am pretty much running at optimized defaults, with the exception of the ram voltage. I would like to start overclocking the system, any suggestions on some of the bios settings would be greatly appreciated. I take it, I want to tweak the memory settings, the bus speed, and lower the HT? Thanks, -- Don Burnette |
#2
|
|||
|
|||
Overclocking X2 4400+ K8N Neo4 Plat.
On Sat, 09 Sep 2006 07:48:18 -0500, Don Burnette wrote:
I would like to start overclocking the system, any suggestions on some of the bios settings would be greatly appreciated. I take it, I want to tweak the memory settings, the bus speed, and lower the HT? That's it in a nutshell. Might consider raising cpu voltage if needed. -- Want the ultimate in free OTA SD/HDTV Recorder? http://mythtv.org http://mysettopbox.tv/knoppmyth.html Usenet alt.video.ptv.mythtv My server http://wesnewell.no-ip.com/cpu.php HD Tivo S3 compared http://wesnewell.no-ip.com/mythtivo.htm |
#3
|
|||
|
|||
Overclocking X2 4400+ K8N Neo4 Plat.
Here's a pretty exhaustive thread on overclocking an A64 system:
http://i4memory.com/showthread.php?t=327. That thread talks a lot of tweaks enabled particularly in the bios of O/C-friendly DFI mobos, but by using the utility A64 Tweaker (v.0.31) I've been able to tweak those same memory settings otherwhise not possible on my MSI K8N Diamond Platinum (from within Windows). With A64 Tweaker you can really tweak any setting in your memory modules otherwhise not possible in 'normal' bios, like memory frequency 183 MHz, which helped me max out my memory performance! Another useful utility for overclocking 'on-the-fly' from within Windows is ClockGen. I have my A64 4600 X2 running stable at 2808 MHz for some months (default 2400 MHz). Have been higher, but I think it's my memory modules 2x512 Mb Kingston HyperX PC3200 holding me back to run stable at higher. I have set my CPU O/C settings in bios and additional memory tweaks in A64 Tweaker v.0.31 to load at startup. Uffe "Don Burnette" wrote in message ... Hey gang, I seem to have finally, after a few months,gotten my system stable. Mainly, by upping the voltage on my Corsair ram go 2.8v Now, I am ready to start tweaking this puppy. System : MSI K8N Neo4 Plat mb Athlon X2 4400+ dual core 2 gb Corsair 3500LL Pro dual channel ram ( 2x1gb) Saphire X850XT PCIe video card I am pretty much running at optimized defaults, with the exception of the ram voltage. I would like to start overclocking the system, any suggestions on some of the bios settings would be greatly appreciated. I take it, I want to tweak the memory settings, the bus speed, and lower the HT? Thanks, -- Don Burnette |
#4
|
|||
|
|||
Overclocking X2 4400+ K8N Neo4 Plat.
Thanks for the tips guys, going to start tweaking this thing and see what I
can get out of it. -- Don Burnette "Uffe" wrote in message .. . Here's a pretty exhaustive thread on overclocking an A64 system: http://i4memory.com/showthread.php?t=327. That thread talks a lot of tweaks enabled particularly in the bios of O/C-friendly DFI mobos, but by using the utility A64 Tweaker (v.0.31) I've been able to tweak those same memory settings otherwhise not possible on my MSI K8N Diamond Platinum (from within Windows). With A64 Tweaker you can really tweak any setting in your memory modules otherwhise not possible in 'normal' bios, like memory frequency 183 MHz, which helped me max out my memory performance! Another useful utility for overclocking 'on-the-fly' from within Windows is ClockGen. I have my A64 4600 X2 running stable at 2808 MHz for some months (default 2400 MHz). Have been higher, but I think it's my memory modules 2x512 Mb Kingston HyperX PC3200 holding me back to run stable at higher. I have set my CPU O/C settings in bios and additional memory tweaks in A64 Tweaker v.0.31 to load at startup. Uffe "Don Burnette" wrote in message ... Hey gang, I seem to have finally, after a few months,gotten my system stable. Mainly, by upping the voltage on my Corsair ram go 2.8v Now, I am ready to start tweaking this puppy. System : MSI K8N Neo4 Plat mb Athlon X2 4400+ dual core 2 gb Corsair 3500LL Pro dual channel ram ( 2x1gb) Saphire X850XT PCIe video card I am pretty much running at optimized defaults, with the exception of the ram voltage. I would like to start overclocking the system, any suggestions on some of the bios settings would be greatly appreciated. I take it, I want to tweak the memory settings, the bus speed, and lower the HT? Thanks, -- Don Burnette |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help with unstable system K8N Neo4 Plat /X2 4400 | Don Burnette | AMD x86-64 Processors | 29 | August 10th 06 11:45 AM |
Help with unstable system K8N Neo4 Plat /X2 4400 | Don Burnette | General | 19 | August 10th 06 11:45 AM |
MSI K8N Neo4 Plat/X2 4400 finally stable! | Don Burnette | AMD x86-64 Processors | 2 | April 26th 06 11:24 AM |
Updating K8N Neo4 Plat drivers - MSI or Nvidia? | Don Burnette | General | 7 | March 6th 06 12:05 PM |
Anyone using a MSI K8N Neo4 Plat ? | James998 | Homebuilt PC's | 0 | February 21st 05 11:17 PM |