If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
NF7 ver 2.0
abit nf7 ver 2.0
barton athlon xp 2500+ 2x256mb corsair memory 1x512mb corsair memory 40gb seagate hdd saphire ati 9600pro 256mb video card agp 8x getting power to vid card, lights up but no action whatsoever when i try to power on the pc. no boot sequence, no beeps, no power light coming on. Switched power supply out and same situation. Is it likely mobo or processor? Any help appeciated, system was built in feb 2004 and this is the first problem. All ram is same speed and manufacturer. Stymied |
#2
|
|||
|
|||
NF7 ver 2.0
Similar problem here. Head scratcher, for sure. Removed processor and
reinstalled. The thing then woke up. No problems since. mumphry999 wrote: abit nf7 ver 2.0 barton athlon xp 2500+ 2x256mb corsair memory 1x512mb corsair memory 40gb seagate hdd saphire ati 9600pro 256mb video card agp 8x getting power to vid card, lights up but no action whatsoever when i try to power on the pc. no boot sequence, no beeps, no power light coming on. Switched power supply out and same situation. Is it likely mobo or processor? Any help appeciated, system was built in feb 2004 and this is the first problem. All ram is same speed and manufacturer. Stymied |
#3
|
|||
|
|||
NF7 ver 2.0
So i tried to get the processor removed and cant seem to get the switch to
release. any ideas on that one? is it a push down and away type of lock? "Airman Thunderbird" wrote in message . .. Similar problem here. Head scratcher, for sure. Removed processor and reinstalled. The thing then woke up. No problems since. mumphry999 wrote: abit nf7 ver 2.0 barton athlon xp 2500+ 2x256mb corsair memory 1x512mb corsair memory 40gb seagate hdd saphire ati 9600pro 256mb video card agp 8x getting power to vid card, lights up but no action whatsoever when i try to power on the pc. no boot sequence, no beeps, no power light coming on. Switched power supply out and same situation. Is it likely mobo or processor? Any help appeciated, system was built in feb 2004 and this is the first problem. All ram is same speed and manufacturer. Stymied |
Thread Tools | |
Display Modes | |
|
|