A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Cdr
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Nero 6 Ultra won't install



 
 
Thread Tools Display Modes
  #1  
Old October 17th 06, 12:08 AM posted to alt.comp.periphs.cdr
Kevin
external usenet poster
 
Posts: 80
Default Nero 6 Ultra won't install

I'm trying to install my retail copy of Nero 6 Ultra after a reformat and
reinstall of Windows. I have installed this CD before with no problems at
all, it went smooth as silk. Now, it just sits there in my DVD/CDRW drive
and hangs the installation. And freezes Windows and Windows Explorer solid.
I've let it sit there for twenty minutes at a time with no change. The
drive light indicates the drive is working, but Nero won't install at all.
The serial number is correct, an incorrect number won't get you to the next
installation screen. Has this happened to anyone else? Ideas are
appreciated.



--
Posted via a free Usenet account from http://www.teranews.com

  #2  
Old October 17th 06, 08:02 AM posted to alt.comp.periphs.cdr
Brian K
external usenet poster
 
Posts: 36
Default Nero 6 Ultra won't install

On 10/16/2006 7:08 PM Kevin plucked Senior Frog's Magic Twanger and said:
I'm trying to install my retail copy of Nero 6 Ultra after a reformat and
reinstall of Windows. I have installed this CD before with no problems at
all, it went smooth as silk. Now, it just sits there in my DVD/CDRW drive
and hangs the installation. And freezes Windows and Windows Explorer solid.
I've let it sit there for twenty minutes at a time with no change. The
drive light indicates the drive is working, but Nero won't install at all.
The serial number is correct, an incorrect number won't get you to the next
installation screen. Has this happened to anyone else? Ideas are
appreciated.




Things may have changed but when I did my install there was free
installation help for Nero. It is either a toll free number in your
documents, or an e-mail address. As long as it's free, why not avail
yourself for help from the software developer?

--
________
To email me, Edit "blog" from my email address.
Brian M. Kochera
"Some mistakes are too much fun to only make once!"
View My Web Page: http://home.earthlink.net/~brian1951
  #3  
Old October 17th 06, 01:02 PM posted to alt.comp.periphs.cdr
smh
external usenet poster
 
Posts: 279
Default Nero 6 Ultra won't install

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------

Kevin wrote:

I'm trying to install my retail copy of Nero 6 Ultra after a reformat and
reinstall of Windows. I have installed this CD before with no problems at
all, it went smooth as silk. Now, it just sits there in my DVD/CDRW drive
and hangs the installation. And freezes Windows and Windows Explorer solid.
I've let it sit there for twenty minutes at a time with no change. The
drive light indicates the drive is working, but Nero won't install at all.
The serial number is correct, an incorrect number won't get you to the next
installation screen. Has this happened to anyone else? Ideas are
appreciated.


Maybe the install cd is damaged? Do a ScanDisc of Nero CD-DVD Speed:
http://www.cdspeed2000.com
..

================================================== =
Mike Richter - the Slimiest Lying Friggin SOB (UDF)
================================================== =

The slimiest lying friggin SOB Mike Richter has been for YEARS
blaming the UDF -- to weasel out the bugs of DirectCD:

------------------------------------------
UDF is a fragile format
UDF is an unreliable format

the format is very fragile and unreliable
The format is bad - it loses data
The fault is not with the software but with the format

There is an inherent problem in UDF
Packet writing is the same as UDF.

I have used only DCD for packet writing,
have had no problems due to the software
- but too many due to the format itself

to bother with it any longer.
------------------------------------------

But then again:

======================
From: Mike Richter (the Slimiest Lying Friggin ****)
Date: 5/4/06
Subject: UDF Has just bit me in the bum

I have used UDF for many years, but yesterday I had my first
corruption. I am now wondering whether to bother with UDF


First, your problem is not with UDF
======================

-------------------------------
Wow! What a slimy friggin SOB!
----------------------------------------------
Mikey, you are the Slimiest Lying Friggin SOB!
----------------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
(Mike Richter, any Material Connection w/ Roxio?)
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Install Nero 7 - DVD Drive Disappears Randall Cdr 2 February 4th 06 06:39 PM
MPEG-4 Decoding is not avaiable in Nero 6 ultra edition Bun Mui Cdr 1 March 17th 05 03:10 AM
Nero Ultra 6 Nerovision 2 VCD Problem Brian K Cdr 0 April 17th 04 06:34 AM
Help Geforce 5700 ultra install Kogi Kaishakunin Nvidia Videocards 1 January 20th 04 05:34 AM
help e-vga 5900 ultra wont install Carlos Figueroa Nvidia Videocards 1 August 1st 03 08:52 AM


All times are GMT +1. The time now is 12:02 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.