If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Reloading MS Word 2000
I have a Packard Bell Club 600 and need to reload Word 2000 but leaving
everything else on theHD intact. Can I do this using the Restore/Recovery diskette and Packard Bell Master CDs and if so what do I do? Gerry |
#2
|
|||
|
|||
Does your software include the "Smart Restore" facility ?(as mine does) In
which case it is divided into bundled hardware and software restores. If it is on the start menu,probably filed under "Tools", I think it tells you when to insert the disk and what to do. However,mine is a 1998 Platinum system and the spec may have changed by the time yours came along. cs "BG Brown" wrote in message ... I have a Packard Bell Club 600 and need to reload Word 2000 but leaving everything else on theHD intact. Can I do this using the Restore/Recovery diskette and Packard Bell Master CDs and if so what do I do? Gerry |
#3
|
|||
|
|||
Many thanks - now done
Gerry "Wilfrid Coughrock" wrote in message ... Does your software include the "Smart Restore" facility ?(as mine does) In which case it is divided into bundled hardware and software restores. If it is on the start menu,probably filed under "Tools", I think it tells you when to insert the disk and what to do. However,mine is a 1998 Platinum system and the spec may have changed by the time yours came along. cs "BG Brown" wrote in message ... I have a Packard Bell Club 600 and need to reload Word 2000 but leaving everything else on theHD intact. Can I do this using the Restore/Recovery diskette and Packard Bell Master CDs and if so what do I do? Gerry |
#4
|
|||
|
|||
Some versions of Restore have selective restore
Some restores allow you to restore again assuming you do not format with only writing over data and would allow the Word to install Some versions of restore allow you to do it right off the CD I may be able to figure this out Maybe What is the Master CD # I can reference it against the ones I have here "BG Brown" wrote in message ... Many thanks - now done Gerry "Wilfrid Coughrock" wrote in message ... Does your software include the "Smart Restore" facility ?(as mine does) In which case it is divided into bundled hardware and software restores. If it is on the start menu,probably filed under "Tools", I think it tells you when to insert the disk and what to do. However,mine is a 1998 Platinum system and the spec may have changed by the time yours came along. cs "BG Brown" wrote in message ... I have a Packard Bell Club 600 and need to reload Word 2000 but leaving everything else on theHD intact. Can I do this using the Restore/Recovery diskette and Packard Bell Master CDs and if so what do I do? Gerry |
#5
|
|||
|
|||
As I said:
"Many thanks - now done Gerry" "metronid" wrote in message ... Some versions of Restore have selective restore Some restores allow you to restore again assuming you do not format with only writing over data and would allow the Word to install Some versions of restore allow you to do it right off the CD I may be able to figure this out Maybe What is the Master CD # I can reference it against the ones I have here "BG Brown" wrote in message ... Many thanks - now done Gerry "Wilfrid Coughrock" wrote in message ... Does your software include the "Smart Restore" facility ?(as mine does) In which case it is divided into bundled hardware and software restores. If it is on the start menu,probably filed under "Tools", I think it tells you when to insert the disk and what to do. However,mine is a 1998 Platinum system and the spec may have changed by the time yours came along. cs "BG Brown" wrote in message ... I have a Packard Bell Club 600 and need to reload Word 2000 but leaving everything else on theHD intact. Can I do this using the Restore/Recovery diskette and Packard Bell Master CDs and if so what do I do? Gerry |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Driver for Inspiron 4000/Windows 2000 87 Key Keyboard | [email protected] | Dell Computers | 3 | March 3rd 05 03:46 AM |
KR7A-RAID and KG7A-RAID boot problem with Athlon XP 2000 | Bob Bagnall | Abit Motherboards | 1 | May 22nd 04 01:32 AM |
Please help with new system - hangs when booting Windows 2000. | Kevin Lawton | Homebuilt PC's | 7 | April 14th 04 02:40 AM |
Word -- mulitiple installations | meirman | Dell Computers | 9 | October 21st 03 08:29 AM |
When burning with Windows 2000 server pc becomes unusable | KJ | Cdr | 1 | August 28th 03 02:27 PM |