If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
NVMonitor not showing temperature
Hi,
I just bought myself an Asus EN8800GT TOP card. I didn't install the drivers that were included with the card, I just installed the latest Nvidia drivers (175.16) and NTune software (5.05.54). The problem now is that the GPU temperature stays zero in the NVMonitor part of the Nvidia control panel. Whatever I configure, the temperature doesn't show. Anyone else with the same problem and a possible solution ? Matthias |
#2
|
|||
|
|||
NVMonitor not showing temperature
"Access" wrote in message ... Hi, I just bought myself an Asus EN8800GT TOP card. I didn't install the drivers that were included with the card, I just installed the latest Nvidia drivers (175.16) and NTune software (5.05.54). The problem now is that the GPU temperature stays zero in the NVMonitor part of the Nvidia control panel. Whatever I configure, the temperature doesn't show. Anyone else with the same problem and a possible solution ? Matthias What two readings do you get for the PCB and GPU sensors with GPU-Z? |
#3
|
|||
|
|||
NVMonitor not showing temperature
"Augustus" wrote in message newsTz2k.155$sg6.131@edtnps91... "Access" wrote in message ... Hi, I just bought myself an Asus EN8800GT TOP card. I didn't install the drivers that were included with the card, I just installed the latest Nvidia drivers (175.16) and NTune software (5.05.54). The problem now is that the GPU temperature stays zero in the NVMonitor part of the Nvidia control panel. Whatever I configure, the temperature doesn't show. Anyone else with the same problem and a possible solution ? Matthias What two readings do you get for the PCB and GPU sensors with GPU-Z? What do you mean ? With GPU-Z 0.2.3 I only see GPU core clock, GPU memory clock and fan speed in the "Sensors" tab. |
#4
|
|||
|
|||
NVMonitor not showing temperature
What do you mean ? With GPU-Z 0.2.3 I only see GPU core clock, GPU memory
clock and fan speed in the "Sensors" tab. This is what I see with my Galaxy 8800GT OC 512Mb unit and GPU-Z 2.3..... http://www.flickr.com/photos/23117617@N04/2559308485/ |
#5
|
|||
|
|||
NVMonitor not showing temperature
"Augustus" wrote in message news:weH2k.183$sg6.136@edtnps91... What do you mean ? With GPU-Z 0.2.3 I only see GPU core clock, GPU memory clock and fan speed in the "Sensors" tab. This is what I see with my Galaxy 8800GT OC 512Mb unit and GPU-Z 2.3..... http://www.flickr.com/photos/23117617@N04/2559308485/ Strange I don't see these values, only the one I mentioned ... |
#6
|
|||
|
|||
NVMonitor not showing temperature
Access wrote:
Hi, I just bought myself an Asus EN8800GT TOP card. I didn't install the drivers that were included with the card, I just installed the latest Nvidia drivers (175.16) and NTune software (5.05.54). The problem now is that the GPU temperature stays zero in the NVMonitor part of the Nvidia control panel. Whatever I configure, the temperature doesn't show. Anyone else with the same problem and a possible solution ? Matthias I'm using 175.16 with 5.05.54 and I must use the lower panel of NVMonitor to see GPU1 temp readings. Otherwise the only info you can see is: Performance (CPU/MEM), Bus Speeds, Voltages in the top panel. Then you click the right arrow button in the lower right and can see GPU temps and Fan speeds. I get the feeling you are doing this but there is no GPU readout? What happens when you use the old-style nvidia control panel to see your temps? If you can't see the GPU temps with any of the usual suspects, speedfan, Riva Tuner, I'd ditch the card as I've never seen a malfunctioning GPU temp sensor on any card....ever! |
#7
|
|||
|
|||
NVMonitor not showing temperature
"Mr.E Solved!" wrote in message . .. Access wrote: Hi, I just bought myself an Asus EN8800GT TOP card. I didn't install the drivers that were included with the card, I just installed the latest Nvidia drivers (175.16) and NTune software (5.05.54). The problem now is that the GPU temperature stays zero in the NVMonitor part of the Nvidia control panel. Whatever I configure, the temperature doesn't show. Anyone else with the same problem and a possible solution ? Matthias I'm using 175.16 with 5.05.54 and I must use the lower panel of NVMonitor to see GPU1 temp readings. Otherwise the only info you can see is: Performance (CPU/MEM), Bus Speeds, Voltages in the top panel. Then you click the right arrow button in the lower right and can see GPU temps and Fan speeds. I see the temperature graph but it always stays zero ... I get the feeling you are doing this but there is no GPU readout? What happens when you use the old-style nvidia control panel to see your temps? If you can't see the GPU temps with any of the usual suspects, speedfan, Riva Tuner, I'd ditch the card as I've never seen a malfunctioning GPU temp sensor on any card....ever! I will try RivaTuner to see if this helps. I don't have to connect a cable or something to be able to read temperature ? This all should happen through the PCI-e bus ? |
#8
|
|||
|
|||
NVMonitor not showing temperature
"Access" wrote in message ... "Mr.E Solved!" wrote in message . .. Access wrote: Hi, I just bought myself an Asus EN8800GT TOP card. I didn't install the drivers that were included with the card, I just installed the latest Nvidia drivers (175.16) and NTune software (5.05.54). The problem now is that the GPU temperature stays zero in the NVMonitor part of the Nvidia control panel. Whatever I configure, the temperature doesn't show. Anyone else with the same problem and a possible solution ? Matthias I'm using 175.16 with 5.05.54 and I must use the lower panel of NVMonitor to see GPU1 temp readings. Otherwise the only info you can see is: Performance (CPU/MEM), Bus Speeds, Voltages in the top panel. Then you click the right arrow button in the lower right and can see GPU temps and Fan speeds. I see the temperature graph but it always stays zero ... I get the feeling you are doing this but there is no GPU readout? What happens when you use the old-style nvidia control panel to see your temps? If you can't see the GPU temps with any of the usual suspects, speedfan, Riva Tuner, I'd ditch the card as I've never seen a malfunctioning GPU temp sensor on any card....ever! I will try RivaTuner to see if this helps. I don't have to connect a cable or something to be able to read temperature ? This all should happen through the PCI-e bus ? I installed RivaTuner v2.09. Although it complains at startup that my drivers are not yet supported, I can read my GPU core temperature with it !! Woohoo !! Guess ntune doesn't work too well with this card Thanks Matthias |
#9
|
|||
|
|||
I have the exact samt problem as you had (/have). It works for me in rivatuner, so there's no problem with the sensor. However, in rivatuner I cannot get the fan control options working. (my goal is to make dynamically adjusted fan speeds) So then I use nTune, where I can set the fan speed. But then nTune (or rather NVMonitor) cannot detect the gpu temp. It just says 0 degrees.
Did you just come to the conclusion that NVMonitor does not work with this specific graphics card? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ASUS P5W DH Deluxe board - CPU Temperature vs. CPU Core Temperature | John Smith | Asus Motherboards | 6 | January 6th 07 12:35 AM |
ATI showing anything at CES? Also, PCI or PCI-E? | Shredder | Ati Videocards | 0 | January 5th 07 02:16 PM |
nvmonitor a8n-sli-p temp warnings? | [email protected] | Asus Motherboards | 0 | September 1st 05 02:53 AM |
CPU temperature VS. system temperature | Opticreep | Homebuilt PC's | 6 | October 5th 04 03:22 PM |
nvidia System Utility not showing the temperature/voltage graphs! | Alex Hunsley | Asus Motherboards | 8 | June 13th 04 10:53 AM |