A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Software to identify Evo model number?



 
 
Thread Tools Display Modes
  #1  
Old February 23rd 06, 08:17 PM posted to alt.sys.pc-clone.compaq
external usenet poster
 
Posts: n/a
Default Software to identify Evo model number?

I've got a Compaq Evo desktop sat on my desk at work which is crying out for
more memory to make it work properly (1.8GHZ P4, Windows 2000, ... 128MB)
but our IT department, like most in my experience, live in a dreamworld
where they forget that PCs are there to be used for the good of the business
that employees them, so I'm going to buy some more RAM off ebay and do it
myself. Only snag is, I've noticed how in recent years its not just a case
of the right voltage, number of pins, and speed; motherboards are picky as
to what they'll work with and what will just sit silently sit there.

Other than EVO on the outside, there's no clue to what model this is. Is
there any software that will reveal what Compaq model I'm dealing with?


  #2  
Old February 23rd 06, 08:45 PM posted to alt.sys.pc-clone.compaq
external usenet poster
 
Posts: n/a
Default Software to identify Evo model number?

First, why not enter the BIOS CMOS setup and look at the information presented
there. The BIOS setup should tell you the characteristics of the memory
installed.

Next, unplug the power cord, open up the computer and inspect it. If it has (3)
memory sockets, the memory required is undoubtedly PC133 168-pin SDRAM DIMM
memory. If it has (2) memory sockets, the memory can be PC2100 or faster
184-pin DDR DIMM memory. Either way, the memory should be non-parity,
non-registered, non-buffered. Memory voltage is not an issue.

Next, SiSoft's Sandra is claimed to be very good at finding out what is inside a
computer.

Finally, Compaq systems have a sticker usually on the top of the case. The
first characters are the model identifier. I would expect your system to be a
D310 or D510 or similar model.... Ben Myers

On Thu, 23 Feb 2006 20:17:32 -0000, "ITMA" wrote:

I've got a Compaq Evo desktop sat on my desk at work which is crying out for
more memory to make it work properly (1.8GHZ P4, Windows 2000, ... 128MB)
but our IT department, like most in my experience, live in a dreamworld
where they forget that PCs are there to be used for the good of the business
that employees them, so I'm going to buy some more RAM off ebay and do it
myself. Only snag is, I've noticed how in recent years its not just a case
of the right voltage, number of pins, and speed; motherboards are picky as
to what they'll work with and what will just sit silently sit there.

Other than EVO on the outside, there's no clue to what model this is. Is
there any software that will reveal what Compaq model I'm dealing with?


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MBR related Softwares problem what Storage (alternative) 4 March 2nd 05 10:48 AM
Compaq FAQ HH Compaq Computers 0 October 17th 04 12:49 PM
Compaq FAQ HH Compaq Computers 0 October 10th 04 12:49 PM
IBM/Lexmark Model M keyboard Part Number Question Austin R. Graves General 2 January 31st 04 04:23 AM
HELP identifying model number of Deskpro xavier Compaq Computers 1 January 13th 04 04:17 AM


All times are GMT +1. The time now is 01:38 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.