p4p800 deluxe P4-2.4-C overclocking problems

hi

i have a p4p800 deluxe rev 1.02 (BIOS 1015) with a pentium 2.4C CPU
with 2x256MB TwinMos PC3200 DDR ram and a 360 W PSU

whenever i try to set the Bios´ AI overclocking feature to any other
value than standard(10%, 20%, 30 %), the board cannot boot and i get
the "overclocking failed" message. i tried to overclock in manual mode
too, but without success, even for low values...

did anybody experience similar problems ?

bye

dor

"dorgold" wrote in message
m...
hi

i have a p4p800 deluxe rev 1.02 (BIOS 1015) with a pentium 2.4C CPU
with 2x256MB TwinMos PC3200 DDR ram and a 360 W PSU

whenever i try to set the Bios´ AI overclocking feature to any other
value than standard(10%, 20%, 30 %), the board cannot boot and i get
the "overclocking failed" message. i tried to overclock in manual mode
too, but without success, even for low values...

did anybody experience similar problems ?

bye

dor

have you locked the pci\agp at 33\66? I have the same (except bios 1012) nd
run at 251 fsb, stock cooler and voltage.

--

Good Luck!
BB

"Billy_Bat" wrote in message ...

have you locked the pci\agp at 33\66? I have the same (except bios 1012) nd
run at 251 fsb, stock cooler and voltage.

well, i think that the ai-overclocking system should take care of that
automatically, anyway, while trying to overclock in manual mode, i did
set the pci/agp frequency to 33/66 ... no luck

i don´t think that it is a hardware failure, since my system is
running stable at standard speed settings...

anyway, thanks for the hint !

bye

dor