If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
In your opinions what is the best Asus desktop motherboard.
What is the best motherboard for desktops?
No sound or video nic or anything else built in. Intel chipset. Price is a factor. Maximum number of pci slots available I know this is not much information but if you need anymore just let me know. |
#2
|
|||
|
|||
In article , "R"
wrote: What is the best motherboard for desktops? No sound or video nic or anything else built in. Intel chipset. Price is a factor. Maximum number of pci slots available I know this is not much information but if you need anymore just let me know. P4P800-E Deluxe $117 Newegg (dual channel DDR memory, 5 PCI, 1 AGP) This board is based on 865PE Northbridge. Dual channel allows you to get the best memory bandwidth, by using two matching DDR DIMMs. Boards to avoid: The -MX and -VM models are microATX boards, and only have 3 PCI. And a board with 865GV Northbridge has no AGP slot at all. Boards with 848P Northbridge are single channel DDR memory, meaning less memory bandwidth for the processor. If you are overclocking, then a P4C800 or P4C800-E board has a 875 Northbridge, and there will be fewer problems with video artifacts at 250MHz CPU clock or higher. (Assuming normal CPU closk is 200MHz for a FSB800 processor.) A P4C800-E is around $180. The above mentioned boards are S478 based, and S478 processors are disappearing from the retail chain, so whatever processor you pair with the board, may be the last S478 processor you buy for it. The next best thing would be a P5P800 board. It is like a P4P800 board, only it has an LGA775 processor socket, and LGA775 is the mainstream socket for Intel right now. The P5P800 is listed as $95 on Newegg, but is currently out of stock. Zipzoomfly has it for $95.50 . If you currently own a S478 processor, then you'll need to pick up an LGA775 socket processor, to use this board. There are a number of P5xxx boards, but those have PCI Express graphics. Depending on the chipset used, the boards use either DDR or DDR2 memory. (DDR2 is a bit more expensive.) None of the boards offer 5 PCI, but have a mix of PCI Express x1 slots and PCI normal slots. So, if you want max PCI slots, you want an older generation of boards, like the P4P800/P4C800 or a P5P800 board. Or buy a P5xxx and an expensive PCI expansion chassis for your old PCI cards. An expansion chassis won't be quite as fast as a native PCI slot, but for many applications will be good enough. http://www.mobl.com/expansion/ (Magma PCI to PCI expansion) HTH, Paul |
#3
|
|||
|
|||
Thank you Paul I apprciate the your advice.
"Paul" wrote in message ... In article , "R" wrote: What is the best motherboard for desktops? No sound or video nic or anything else built in. Intel chipset. Price is a factor. Maximum number of pci slots available I know this is not much information but if you need anymore just let me know. P4P800-E Deluxe $117 Newegg (dual channel DDR memory, 5 PCI, 1 AGP) This board is based on 865PE Northbridge. Dual channel allows you to get the best memory bandwidth, by using two matching DDR DIMMs. Boards to avoid: The -MX and -VM models are microATX boards, and only have 3 PCI. And a board with 865GV Northbridge has no AGP slot at all. Boards with 848P Northbridge are single channel DDR memory, meaning less memory bandwidth for the processor. If you are overclocking, then a P4C800 or P4C800-E board has a 875 Northbridge, and there will be fewer problems with video artifacts at 250MHz CPU clock or higher. (Assuming normal CPU closk is 200MHz for a FSB800 processor.) A P4C800-E is around $180. The above mentioned boards are S478 based, and S478 processors are disappearing from the retail chain, so whatever processor you pair with the board, may be the last S478 processor you buy for it. The next best thing would be a P5P800 board. It is like a P4P800 board, only it has an LGA775 processor socket, and LGA775 is the mainstream socket for Intel right now. The P5P800 is listed as $95 on Newegg, but is currently out of stock. Zipzoomfly has it for $95.50 . If you currently own a S478 processor, then you'll need to pick up an LGA775 socket processor, to use this board. There are a number of P5xxx boards, but those have PCI Express graphics. Depending on the chipset used, the boards use either DDR or DDR2 memory. (DDR2 is a bit more expensive.) None of the boards offer 5 PCI, but have a mix of PCI Express x1 slots and PCI normal slots. So, if you want max PCI slots, you want an older generation of boards, like the P4P800/P4C800 or a P5P800 board. Or buy a P5xxx and an expensive PCI expansion chassis for your old PCI cards. An expansion chassis won't be quite as fast as a native PCI slot, but for many applications will be good enough. http://www.mobl.com/expansion/ (Magma PCI to PCI expansion) HTH, Paul |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Asus P4C800-E Deluxe doesn't like Asus V9980 graphics card | kanenas | Asus Motherboards | 3 | May 1st 04 04:31 PM |
Asus K8V SE Deluxe Question and Advice Requested | AU | General | 0 | April 28th 04 10:13 PM |
Asus Gf4 4200ti vs. generic vs. Asus fx5200 | Bob Knowlden | Homebuilt PC's | 4 | August 9th 03 04:59 AM |
Asus Gf4 4200ti vs. generic vs. Asus fx5200 | Mickey Mouse | Homebuilt PC's | 3 | August 3rd 03 11:43 PM |
Asus Gf4 4200ti vs. generic vs. Asus fx5200 | S.Heenan | Homebuilt PC's | 0 | August 2nd 03 07:38 PM |