If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#2
|
|||
|
|||
"doc" wrote in message s.com... Just heard about it. Supposed to be the cat's meow....comments ? :: :: doc :: :: : I'll start by advising a "wait and see" posture. Roxio doesn't have the best track record when it comes to trouble-free, reliable software. Go to http://groups.google.com and do a few searches on "Roxio", "Roxio problems", etc. and you'll begin to get a picture. |
#3
|
|||
|
|||
I know about Roxio's issues...That's why I am asking. I am told this one is
a much better effort. There is nothing on their site about it. Anyone know when it will be available ? :: :: doc :: :: : "Peter van der Goes" wrote in message news:%EqYb.2868$lQ2.154@okepread02... "doc" wrote in message s.com... Just heard about it. Supposed to be the cat's meow....comments ? :: :: doc :: :: : I'll start by advising a "wait and see" posture. Roxio doesn't have the best track record when it comes to trouble-free, reliable software. Go to http://groups.google.com and do a few searches on "Roxio", "Roxio problems", etc. and you'll begin to get a picture. |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
.. ---------------------------------
Roxio / Adaptec Trashy company that picks Trashes as its beta testers --------------------------------- doc wrote: Just heard about it. Supposed to be the cat's meow....comments ? Wonder if it comes with Ginsu knives: ========================================= Free Ginsu Knives w/ Easy Coaster Creator ========================================= ===================== From: (Don) Subject: EZCD 4.0 Date: 12/22/99 I have 3.5c. I can get 4.0 from a friend. Is there any reason for me to install 4.0? Of course! If your friend is not appreciative of Creator 4 and will give or sell it to you, by all means, take him up on it. It is, after all, the most troublefree and usefull cdr software that has been written in the history of cd recording. Even professionals use it. Rocket scientists are raving over it. Only those that are too stupid to appreciate the advanced features are complaining. First off: It is the most thoroughly tested cdr software on the planet. Adaptec uses the Beta testing proceedure to completely eliminate any bugs that have crept through the alpha stage. To this end, they utilize the brainpower of real Rocket Scientists in the Beta test stage. All bugs are of course reported and fixed before the final release of the software, so you are assured of getting the best product available. In short, if this software malfunctions on your system, you need to investigate and fix your system, bubba! Now, lets talk about the features: Whether you just want to backup your system, or maybe work with mp3s or record any number of formats, this software gives you the ultimate in control and precision. Other programs just cant compete with the creator. You get complete control of your recordings! You get Spin Doctor, the award winning audio "do it all" program. Many have dumped such programs as Cool-Edit, Dart, Sound-Forge, and many others. These outdated programs just cannot compete with the Spin Doctor. If you are into audio, then spin doctor is the dog's balls! You cant live without it! You get Jewel Case creator! This is the latest and most fantastic of all the complements of Creator! All the competition is back at the drawing board to improve their labeling software. They will never catch up, however, for this software is way ahead of its time. Once you use this, you will NEVER go back to any other cover editor of any sort! You get Take Two! The revolutionary backup program. It has surpassed all the old favorites such as Ghost and Drive image. (These poor guys are crying in their beers!) In its short history, Take Two has supplanted these in terms of reliability! There has never been a documented case of failure to restore properly from a Take Two backup! It has been thourougly tested by rocket scientists who are familiar with scientific theory and know just how to test things to their ultimate potential! The entire core of Creator was done in a top down programming manner, and quality control was foremost in the thoughts of the designers. I heartily recommend that you use the Creator, and throw out all that old antiquated software that just isnt worth using any more! Plus, if you order immediately, from adaptec, you will get a set of Ginsu steak knives, and a hand carved holder to put them in. The first 100 orders will also get a free set of drink coasters, and this is a real bonus; you will need these, as the creator will not make coasters. ===================== |
#6
|
|||
|
|||
On Tue, 17 Feb 2004 05:36:56 GMT, "doc" wrote:
Just heard about it. Supposed to be the cat's meow....comments ? Just saw this review today: http://www.pcmag.com/article2/0,4149,1527191,00.asp |
#7
|
|||
|
|||
.. ---------------------------------
Roxio / Adaptec Trashy company that picks Trashes as its beta testers --------------------------------- doc wrote: Just heard about it. Supposed to be the cat's meow....comments ? Don Sterner wrote this when Ver. 4 came out: ======================= From: Don Sterner Date: (8/31/99) So now the REAL beta test begins. If past experience is any example, several significant problems will be discovered within the first few weeks. Some will be problems that couldn't possibly have endured a valid beta without detection. Eventually, (6-8+ months later), Adaptec will release an update which will only partially correct the problems and will add new ones in their place. Finally, a marginally-useable product will result 1.5 to 2 years down the road - just like with V3. We've been here before. ======================= And Ver. 4 went thru exactly the scenario he described. And Ver. 5 went thru exactly the same scenario he described. And Ver. 6 went thru exactly the same scenario till now. And Ver. 7 will go thru exactly the same scenario. |
#8
|
|||
|
|||
.. --------------------------------------
Mike Richter, were you born with "Scam Artist" emblazoned on your face? -------------------------------------- (Mike Richter, any Material Connection w/ Roxio?) http://groups.google.com/groups?selm...mindspring.com (Messages 10, 12 -- 34, 54 -- 69) ( No pipsqueaks have been able to prove ANY of the above is a libel ) ( -- despite Mikey's supposed to have proof of misquotes!!! ) doc wrote: Just heard about it. Supposed to be the cat's meow....comments ? If you do get it, don't be careless and thoughtless: ============================================= Mike Richter (cRoxio Shill) wrote (12/14/03): I have received an email from Roxio advising me to download an update for my Roxio Platinum. Would you advise me to do this. if you are going to update such software, have a complete system backup first so you can restore to your current conditions even if the update fails. Is a backup essential now even for an update of Easy CD Cremator? ====================== From: Mike Richter (cRoxio Shill) Subject: Why uninstall EZCD 5??? Date: 5/5/01 I consider an image backup essential before any major software installation I suspect that those who have trouble are also careless - perhaps thoughtless - about their use of their computer systems. Why any competent computer user would fail to 'buy' such inexpensive insurance is beyond me. ==================== From: "WayneC" Date: 5/5/01 Yes Mike, I agree, Roxio should post a very BIG warning: Do not attempt to install ECDC 5 until you have made a full system backup, removed the backup media and stored it at least 100 yards away from any ECDC 5 component including the box it came in. ========================== From: Thomas A. Horsley Date: 5/6/01 Yes, I imagine that's a habit folks who install Adaptec software develop quite early in the learning curve ====================== From: "Fishface" Date: 11/7/02 Is that a representative of Roxio justifying software which doesn't properly uninstall? Is it so difficult for them to do that an attempt is made to defend their inability? Backup? Hell, I'm considering installing it alone on a separate installation on a separate partition on someone elses computer. ====================== ============================================= |
#9
|
|||
|
|||
.. ---------------------------------
Roxio / Adaptec Trashy company that picks Trashes as its beta testers --------------------------------- Indiana wrote: "doc" wrote: Just heard about it. Supposed to be the cat's meow....comments ? Just saw this review today: http://www.pcmag.com/article2/0,4149,1527191,00.asp MEMBER RATINGS nibbles4u "Only problem is application suite is more resource intensive." =========================== From: "Allen Nelson" 4/5/00 Subject: Adaptec send me my $100, and I will send you the greatest Cd writing software on the planet, EzCd 4.02! EzCd creator 4.01 / 4.02 is too powerful for my 233 Pentium Pc, 64 Mb Ram, Ibm 14.1 Gig Hard drive, Wd 3.5 Gig Hard drive, Toshiba 6201TA Scsi Cd-rom drive, Ricoh Mp6200s writer. At least that is what your support person said. =========================== ============================== From: "Bill Halvorsen" Subject: EZCD 5 & Line In? - Soundstream/Spin Doctor uses 96% CPU Date: 6/22/01 "KenJr" wrote: I just ran Wintop and started SoundStream and Wintop is showing that it is using between .1% and .15% of CPU time. After starting Spin Doctor it went up to 85%. Thanks for trying this! I really appreciate it. I had wondered if it was somehow a fault with my particular setup (have no other problems with any programs, but this one is a dog). I hope that a Roxio representative will see this message and respond to it... this is a bug that I was hoping would be fixed so I could reinstall 5 since I did pay full price for it - but my main usage is Spin Doctor, and this CPU hogging causes my precision "starts and stops" to be imprecise enough (because the mouse clicks are interpreted too slowly) to render it useless for my purposes. Of course Roxio never responded to the case #1021719 entered long ago so this may be as difficult as the 4.0 to 4.01 (or whatever it was) patch that fixed the 0.9 DAE (and so many other) bugs. It did affect my setup a little worse, my CPU usage attributed to Spindoctor was right around 94%. Bad news for the running edits, and made my machine behave like a 386-16. Again, thanks for measuring the impact of these two components run together.... Roxio? Hello? ============================== |
#10
|
|||
|
|||
In article om, smh wrote:
.. --------------------------------- Roxio / Adaptec Trashy company that picks Trashes as its beta testers --------------------------------- doc wrote: Just heard about it. Supposed to be the cat's meow....comments ? Wonder if it comes with Ginsu knives: ========================================= Free Ginsu Knives w/ Easy Coaster Creator ========================================= You WOULD want some wouldnt you. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Roxio Disc Copier vs Sony DDU1621 | Ken Long | Cdr | 2 | January 4th 04 02:32 AM |
Help: Backup Exec 9.0 backup on to Plextor DVD+RW via Roxio | Jeff Ishaq | Cdr | 0 | October 22nd 03 06:39 PM |
KHypermedia 48x24x48 Drive Roxio problem | Cornelis | Cdr | 0 | August 12th 03 06:30 PM |
ROXIO problems | Paul | Cdr | 5 | August 1st 03 06:08 PM |
I want to use Nero, not Roxio | Greg Bailey | Cdr | 0 | July 16th 03 03:05 PM |