adaptec 29320

hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it won`t
hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

g7syj/martin

"g7syj" wrote in message .. .
hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it won`t
hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

The 29320R will work on either PCI-X or PCI 2.1/2.2 slots.
Maximum throughput may be throttled to one degree or another
on these older slots, depending on your PCI bus width (32 or
64-bit), speed (33, 66 or 133MHz), how many drives you'll be
running on each channel, and configuration of the drives.

No; PCI is incompatible with PCI-X.


DaveW

---
"g7syj" wrote in message
.. .
hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it won`t
hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

g7syj/martin

Huh? You're confusing PCI-X with PCI Express.

"DaveW" wrote in message ...
No; PCI is incompatible with PCI-X.


DaveW

---
"g7syj" wrote in message
.. .
hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it won`t
hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

g7syj/martin

In article , g7syj
wrote:

hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it won`t
hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

g7syj/martin

http://adaptec-tic.adaptec.com/cgi-b...?p_faqid=11130

*******
Which 64-bit PCI cards will work in older 32-bit 5.0 volt PCI slots?

Question
Which 64-bit PCI cards will work in older 5.0 volt 32-bit PCI slots?

This information applies to the following Product(s):

- Adaptec SCSI Card 29320A-R
- Adaptec SCSI Card 29320ALP-R
- Adaptec SCSI Card 39320A-R
- Adaptec SCSI Card 29320-R
- Adaptec SCSI Card 29320LP-R
- Adaptec SCSI Card 39320-R
- Adaptec SCSI Card 39320D-R
- Adaptec SCSI Card 39320D
- Adaptec Fibre Card 9110G Copper
- Adaptec Fibre Card 9110G Optical
- Adaptec Fibre Card 9210LP
- Adaptec Fibre Card 9210LPC
- FireConnect 8300
- Adaptec PowerDomain 29160
- Adaptec PowerDomain 39160
- Adaptec SCSI Card 29160
- Adaptec SCSI Card 39160
- Adaptec SCSI Card 29160LP
- ANA-6922A
- ANA-6944/T4
- ANA-6944/TX
- ANA-6944A
- ANA-6944A/TX
- ANA-62022
- ANA-62044
- ANA-64022LV
- ANA-64044
- ANA-64044LV
- Adaptec ATA RAID 2400A
- Adaptec SCSI RAID 2110S
- Adaptec SCSI RAID 2120S
- Adaptec SCSI RAID 2200S
- Adaptec SCSI RAID 3210S
- Adaptec SCSI RAID 3410S
- Adaptec iSCSI Card 7211F
- Adaptec iSCSI Card 7211C
- Adaptec Serial ATA Raid 2410SA
- Serial ATA Raid 2410SA Enclosure Kit
- Adaptec Serial ATA Raid 2810SA
- Adaptec Serial ATA Raid 21610SA

This information applies to the following Operating System(s):

- This information is not Operating System specific

Answer

Most 64-bit cards are 3.3 and 5 volt which allows them to work in
the older 5.0 volt 32-bit PCI slots. 64-bit PCI cards are backwards
compatible with 32-bit PCI slots. Please see the list of indicated
products above that will work in the older 32-bit 5.0 volt PCI
buses.

The motherboard must be fully PCI 2.1 compliant as well.
*******

There are some postings, where a given 64 bit product, doesn't
appear to fit the socket. Sometimes this is due to an error
when milling the edge card.

That said, there is still the issue of available low memory
for use by an add-in card BIOS. That may affect the ability to
boot from the card.

Getting the card plugged in is only part of the story.

HTH,
Paul

Paul wrote:

In article , g7syj
wrote:

hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it
won`t hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

g7syj/martin


http://adaptec-tic.adaptec.com/cgi-b...?p_faqid=11130

*******
Which 64-bit PCI cards will work in older 32-bit 5.0 volt PCI slots?

Question
Which 64-bit PCI cards will work in older 5.0 volt 32-bit PCI slots?

This information applies to the following Product(s):

- Adaptec SCSI Card 29320A-R
- Adaptec SCSI Card 29320ALP-R
- Adaptec SCSI Card 39320A-R
- Adaptec SCSI Card 29320-R
- Adaptec SCSI Card 29320LP-R
- Adaptec SCSI Card 39320-R
- Adaptec SCSI Card 39320D-R
- Adaptec SCSI Card 39320D
- Adaptec Fibre Card 9110G Copper
- Adaptec Fibre Card 9110G Optical
- Adaptec Fibre Card 9210LP
- Adaptec Fibre Card 9210LPC
- FireConnect 8300
- Adaptec PowerDomain 29160
- Adaptec PowerDomain 39160
- Adaptec SCSI Card 29160
- Adaptec SCSI Card 39160
- Adaptec SCSI Card 29160LP
- ANA-6922A
- ANA-6944/T4
- ANA-6944/TX
- ANA-6944A
- ANA-6944A/TX
- ANA-62022
- ANA-62044
- ANA-64022LV
- ANA-64044
- ANA-64044LV
- Adaptec ATA RAID 2400A
- Adaptec SCSI RAID 2110S
- Adaptec SCSI RAID 2120S
- Adaptec SCSI RAID 2200S
- Adaptec SCSI RAID 3210S
- Adaptec SCSI RAID 3410S
- Adaptec iSCSI Card 7211F
- Adaptec iSCSI Card 7211C
- Adaptec Serial ATA Raid 2410SA
- Serial ATA Raid 2410SA Enclosure Kit
- Adaptec Serial ATA Raid 2810SA
- Adaptec Serial ATA Raid 21610SA

This information applies to the following Operating System(s):

- This information is not Operating System specific

Answer

Most 64-bit cards are 3.3 and 5 volt which allows them to work in
the older 5.0 volt 32-bit PCI slots. 64-bit PCI cards are backwards
compatible with 32-bit PCI slots. Please see the list of indicated
products above that will work in the older 32-bit 5.0 volt PCI
buses.

The motherboard must be fully PCI 2.1 compliant as well.
*******

There are some postings, where a given 64 bit product, doesn't
appear to fit the socket. Sometimes this is due to an error
when milling the edge card.

That said, there is still the issue of available low memory
for use by an add-in card BIOS. That may affect the ability to
boot from the card.

Getting the card plugged in is only part of the story.

HTH,
Paul

thanks ,i found this
http://www.pcisig.com/specifications...hite_paper.pdf
it says it is compatable
thanks guys.
all the best g7syj/martin

g7syj wrote:
hi ihave got a k8ne-delux
is it possible adaptec 29320a-r will work in this mobo
bearing in mind the card is pci-x.
im`e getting conflicting reports on this
somebody has said yes it will work but you wll get a peformance hit
somebody else said no
iv`e tried google to no avail its the same again yes it will / no it won`t
hell i don`t know what to do.
has anyone got this card working on a nomal pci slot?
thanks.

g7syj/martin

In addition to the other suggestions, keep in mind the 64-bit part of
the card will hang past the end of the slot - make sure there's no
obstructions on the motherboard in that area that will stop the card
from fitting.

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from
Home Page: http://www.roberthancock.com/