If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Computer won't start
Hello,
I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Thanks, twomt |
#2
|
|||
|
|||
Computer won't start
"twomt" wrote in message ... Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Thanks, twomt Try resetting the bios. There is usually a jumper near the cmos battery |
#3
|
|||
|
|||
Computer won't start
Joel wrote:
twomt wrote: Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Me? these are what I usually do. 1. I read and learn thing *before* thing starts happening to my system as many and I doing at the moment. What I am trying to do is encouraging others to take a opportunity for future problem. 2. I would try to see *if* it causes by hardware or software. - Hardware - I would go to CMOS setting screen, and often most problems solve itself just by entering the CMOS setting. Or usually the CMOS will detect something changed and recogize and fix itself. Then check either Power-supply, memory, video, audio cards etc. make sure them have good connection. - Software, then sometime just boot to .. I forget what it's called .. ohh "Safe Made" can sold some software/hardware related issue itself. Or on safe mode Windows may have to load some specific program, then update the working Windows to normal boot. Yes, sometime it's so weird but works sometime Or booting using util like util called "Winternal" and I don't know exactly what it does, but my systems with booting issue were solved by just boot with "Winternal". But I ain't recognize to jump straight to Winternal without taking a chance to learn what's going on. Thanks, twomt 1. I am not getting this statement... 2. CMOS, as I wrote the PC locks up / stops booting before this point. I haven't been able to get into the CMOS. Because it already happens at this point, I am suspecting a hardware or bios issue. If it was software, I would imagine that it would stop only at a later point. I've already unplugged the cards and stuck them back in, no change. As most of the stuff is on-board, I can't do a lot with it anyway. The other option to reset the CMOS is probably the best way to go forward for now. And perhaps to find a spare-parts PC that I can use to see if I can locate the root cause. But thanks for your response anyway. |
#4
|
|||
|
|||
Computer won't start
philo wrote:
"twomt" wrote in message ... Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Thanks, twomt Try resetting the bios. There is usually a jumper near the cmos battery Thanks, I might give that a go... trying to locate jumper :P |
#5
|
|||
|
|||
Computer won't start
twomt wrote:
Joel wrote: twomt wrote: Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Me? these are what I usually do. 1. I read and learn thing *before* thing starts happening to my system as many and I doing at the moment. What I am trying to do is encouraging others to take a opportunity for future problem. 2. I would try to see *if* it causes by hardware or software. - Hardware - I would go to CMOS setting screen, and often most problems solve itself just by entering the CMOS setting. Or usually the CMOS will detect something changed and recogize and fix itself. Then check either Power-supply, memory, video, audio cards etc. make sure them have good connection. - Software, then sometime just boot to .. I forget what it's called .. ohh "Safe Made" can sold some software/hardware related issue itself. Or on safe mode Windows may have to load some specific program, then update the working Windows to normal boot. Yes, sometime it's so weird but works sometime Or booting using util like util called "Winternal" and I don't know exactly what it does, but my systems with booting issue were solved by just boot with "Winternal". But I ain't recognize to jump straight to Winternal without taking a chance to learn what's going on. Thanks, twomt 1. I am not getting this statement... 2. CMOS, as I wrote the PC locks up / stops booting before this point. I haven't been able to get into the CMOS. Because it already happens at this point, I am suspecting a hardware or bios issue. If it was software, I would imagine that it would stop only at a later point. I've already unplugged the cards and stuck them back in, no change. As most of the stuff is on-board, I can't do a lot with it anyway. The other option to reset the CMOS is probably the best way to go forward for now. And perhaps to find a spare-parts PC that I can use to see if I can locate the root cause. But thanks for your response anyway. Some simple things you can try, are disconnecting I/O devices from the machine. For example, disconnect the USB devices outside the case first. If some I/O device has died or is malfunctioning, they may be confusing the BIOS. Open the machine, disconnect the data cables from the hard drive and CDROM drive. Using a piece of paper, make notes of where the cables go, so you can put them back exactly as you found them. Other checklist items: 1) In this case, we know your BIOS is executing. The flashing of the keyboard lights is a positive sign. It means the processor is executing (so the processor does not need to be reseated), the BIOS code was executed (so the BIOS isn't completely fried - the main block of BIOS code has probably passed the checksum test). I'm not sure about RAM. Maybe the RAM test would still be an item yet to be completed by the BIOS. 2) Turn off the computer and unplug it. To work inside, you want all power removed (not for risk of shock or anything - it is to protect your hardware). The reason for unplugging, is to make sure +5VSB is disabled, and that there is no power present in the RAM slots. At least one poster with a broken computer here, had a power supply with a broken switch, and the power supply was on, even though the power switch was set to off. Unplugging ensures there aren't any incidents like that. Remove and reseat the RAM. 3) If you have multiple sticks of RAM, try the machine with only one of the sticks plugged in. That may not be enough memory, for an OS to boot properly, so may not represent a usable system configuration. But the purpose of inserting only one stick of RAM, is to see if you can get the BIOS screen to appear. If a stick of memory goes bad, it may prevent POST. In some cases, the computer beeps if the memory is bad. But it is also possible the BIOS just hangs. 4) Clearing the CMOS is a good test. But you'll also have to restore any custom settings in the BIOS. And I have to admit, on my oldest machine, when the CMOS battery died, I was at a loss to remember what some of the settings did. It did take me an hour or so of experimenting, until I got the hang of it, and the machine was able to boot with a new CMOS battery. While power supply failures on computers are a frequent source of problems (and not completely eliminated in your case), the fact that the keyboard lights blinked gives me hope that the power is good enough to allow the POST process to get further than it currently is. For example, a computer that restarts, just as the Windows desktop appears, could be having a power problem. But in your case, the power consumption should be reasonably stable during some of the BIOS tests, and the BIOS doesn't appear to be getting past things like NVRAM or RAM test, or enumerating hard drives and optical drives. Paul |
#6
|
|||
|
|||
Computer won't start
"twomt" wrote in message
... Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. You say "the" fan is spinning. There is only ONE fan inside your computer? Which one is spinning? CPU, power supply, case fan, what? There should be 2 fans at a minimum: one for the CPU and another inside the power supply (it must have 1 fan at a minimum but sometimes it has 2 fans). Even if the PSU fan is thermally controlled, it should always spin. Same for the CPU fan. If either of those are stopped, you have a problem. The PSU fan is used as the minimal air flow generator for your box. Besides cooling off the PSU, it draws air through the case to cool the rest of the components. The CPU fan must obviously be spinning to cool off this hot component. When you power on the computer, do you hear it beep? After you see the LEDs flash, several seconds later should be a beep which is the BIOS telling you that the POST has successfully completed. An internal speaker must be connected to the motherboard to hear this beep. If you have an internal speaker hooked up and you don't hear the beep then you might have to go to the last step where you revert to a minimal hardware configuration to test your system. Make sure the monitor is powered on before powering on the computer. Some monitors deliberatly remain blank when they are first powered up. If you use a power strip to power up all devices simultaneously then the monitor may simply not be presenting you with a display to show the problem before it gets cleared from the screen. Does your startup of operting system generate any sounds, like an OS startup sound event or beeps? I don't mean beeps from the POST complete event in the hardware. I mean noises produced through your speakers by sound events that you defined in your OS that you could hear when the OS loads. If you hear those sounds then your monitor is bad and why it always looks black although the OS really did load. Before the system BIOS loads, the video BIOS loads first because, well, you need to see the POST results. That's why the first thing seen is the BIOS post from the video card at the top of the screen. However, even before that the CPU pulses the reset line to ensure all devices are returned to their base state which is why you saw the LEDs flash on the keyboard. If the video card is bad then you won't see anything regardless of successful POST and OS load. You say that the monitor always remains black which makes it suspect because you should, at least, see its post output at the top of the screen. Of course, a bad monitor would also prevent seeing anything that was being output by the video card. Check the cables between the video card and monitor. If you get to the POST screen (doesn't sound like it, though), check the hard drive is working. When powering up, listen to the hard drive (remove the side panel to hear the hard drive) which should exhibit a whine noise as it starts to spin up. Although you may not get to the POST screen, you can still clear your CMOS by jumpering across the 2-pin header with a jumper. Leave the jumper on for a minute and then remove (or leave attached by using just one pin). If the CMOS gets corrupted then it may not allow the firmware in the BIOS code to load because the parameters are too screwed up. If that fixes your problem, you should replace the battery. Lastly, revert to a minimal hardware configuration. Remove power plugs from all optical drives, all hard drives except the one where the OS is installed, floppy drives, sound cards, data/fax modem card, and everything from all the slots except the video card. The idea is that you might have a failing PSU that can no longer supply the current needed by the load from all the devices or one of them has failed is causing the host to not boot. You should then only have the PSU connected to the motherboard, maybe the video card, and a hard drive. If it still refuses to boot to the POST screen, remove all memory sticks but one and try again, and cycle through each stick at a time if the host still fails to boot. I've had power supplies that were high quality that still went defective after around 3 to 4 years because of loss of voltage regulation (too much ripple) or could no longer supply the amperage needed by the existing equipment which hasn't changed. The PSU is the life's blood of the computer and way too many builders go too cheap and rely on the specs which many PSU makers stretch way too far for the capacity of their product. If you get a cheap quality PSU then figure your max sustainable load will be two-thirds of their rated wattage. |
#7
|
|||
|
|||
Computer won't start
On 27 Dec, 16:51, Paul wrote:
twomt wrote: Joel wrote: twomt wrote: Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Me? these are what I usually do. 1. I read and learn thing *before* thing starts happening to my system as many and I doing at the moment. What I am trying to do is encouraging others to take a opportunity for future problem. 2. I would try to see *if* it causes by hardware or software. - Hardware - I would go to CMOS setting screen, and often most problems solve itself just by entering the CMOS setting. Or usually the CMOS will detect something changed and recogize and fix itself. Then check either Power-supply, memory, video, audio cards etc. make sure them have good connection. - Software, then sometime just boot to .. I forget what it's called .. ohh "Safe Made" can sold some software/hardware related issue itself. Or on safe mode Windows may have to load some specific program, then update the working Windows to normal boot. Yes, sometime it's so weird but works sometime Or booting using util like util called "Winternal" and I don't know exactly what it does, but my systems with booting issue were solved by just boot with "Winternal". But I ain't recognize to jump straight to Winternal without taking a chance to learn what's going on. Thanks, twomt 1. I am not getting this statement... 2. CMOS, as I wrote the PC locks up / stops booting before this point. I haven't been able to get into the CMOS. Because it already happens at this point, I am suspecting a hardware or bios issue. If it was software, I would imagine that it would stop only at a later point. I've already unplugged the cards and stuck them back in, no change. As most of the stuff is on-board, I can't do a lot with it anyway. The other option to reset the CMOS is probably the best way to go forward for now. And perhaps to find a spare-parts PC that I can use to see if I can locate the root cause. But thanks for your response anyway. Some simple things you can try, are disconnecting I/O devices from the machine. For example, disconnect the USB devices outside the case first. If some I/O device has died or is malfunctioning, they may be confusing the BIOS. Open the machine, disconnect the data cables from the hard drive and CDROM drive. Using a piece of paper, make notes of where the cables go, so you can put them back exactly as you found them. Other checklist items: 1) In this case, we know your BIOS is executing. The flashing of the keyboard lights is a positive sign. It means the processor is executing (so the processor does not need to be reseated), the BIOS code was executed (so the BIOS isn't completely fried - the main block of BIOS code has probably passed the checksum test). I'm not sure about RAM. Maybe the RAM test would still be an item yet to be completed by the BIOS. 2) Turn off the computer and unplug it. To work inside, you want all power removed (not for risk of shock or anything - it is to protect your hardware). The reason for unplugging, is to make sure +5VSB is disabled, and that there is no power present in the RAM slots. At least one poster with a broken computer here, had a power supply with a broken switch, and the power supply was on, even though the power switch was set to off. Unplugging ensures there aren't any incidents like that. Remove and reseat the RAM. 3) If you have multiple sticks of RAM, try the machine with only one of the sticks plugged in. That may not be enough memory, for an OS to boot properly, so may not represent a usable system configuration. But the purpose of inserting only one stick of RAM, is to see if you can get the BIOS screen to appear. If a stick of memory goes bad, it may prevent POST. In some cases, the computer beeps if the memory is bad. But it is also possible the BIOS just hangs. 4) Clearing the CMOS is a good test. But you'll also have to restore any custom settings in the BIOS. And I have to admit, on my oldest machine, when the CMOS battery died, I was at a loss to remember what some of the settings did. It did take me an hour or so of experimenting, until I got the hang of it, and the machine was able to boot with a new CMOS battery. While power supply failures on computers are a frequent source of problems (and not completely eliminated in your case), the fact that the keyboard lights blinked gives me hope that the power is good enough to allow the POST process to get further than it currently is. For example, a computer that restarts, just as the Windows desktop appears, could be having a power problem. But in your case, the power consumption should be reasonably stable during some of the BIOS tests, and the BIOS doesn't appear to be getting past things like NVRAM or RAM test, or enumerating hard drives and optical drives. Paul I once found myself in this situation. Finally, I discovered that I had mixed up the PS/2 connectors for the keyboard and the mouse Or maybe my college found out, blush, blush! |
#8
|
|||
|
|||
Computer won't start
Johan Nyberg wrote:
I once found myself in this situation. Finally, I discovered that I had mixed up the PS/2 connectors for the keyboard and the mouse Or maybe my college found out, blush, blush! I did that once, and it wiped out my BIOS settings :-) The BIOS claimed I was "overclocking my CPU", when it was just the mouse and keyboard connectors in the wrong holes. Paul |
#9
|
|||
|
|||
Computer won't start
Paul wrote:
twomt wrote: Joel wrote: twomt wrote: Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Me? these are what I usually do. 1. I read and learn thing *before* thing starts happening to my system as many and I doing at the moment. What I am trying to do is encouraging others to take a opportunity for future problem. 2. I would try to see *if* it causes by hardware or software. - Hardware - I would go to CMOS setting screen, and often most problems solve itself just by entering the CMOS setting. Or usually the CMOS will detect something changed and recogize and fix itself. Then check either Power-supply, memory, video, audio cards etc. make sure them have good connection. - Software, then sometime just boot to .. I forget what it's called .. ohh "Safe Made" can sold some software/hardware related issue itself. Or on safe mode Windows may have to load some specific program, then update the working Windows to normal boot. Yes, sometime it's so weird but works sometime Or booting using util like util called "Winternal" and I don't know exactly what it does, but my systems with booting issue were solved by just boot with "Winternal". But I ain't recognize to jump straight to Winternal without taking a chance to learn what's going on. Thanks, twomt 1. I am not getting this statement... 2. CMOS, as I wrote the PC locks up / stops booting before this point. I haven't been able to get into the CMOS. Because it already happens at this point, I am suspecting a hardware or bios issue. If it was software, I would imagine that it would stop only at a later point. I've already unplugged the cards and stuck them back in, no change. As most of the stuff is on-board, I can't do a lot with it anyway. The other option to reset the CMOS is probably the best way to go forward for now. And perhaps to find a spare-parts PC that I can use to see if I can locate the root cause. But thanks for your response anyway. Some simple things you can try, are disconnecting I/O devices from the machine. For example, disconnect the USB devices outside the case first. If some I/O device has died or is malfunctioning, they may be confusing the BIOS. Open the machine, disconnect the data cables from the hard drive and CDROM drive. Using a piece of paper, make notes of where the cables go, so you can put them back exactly as you found them. Other checklist items: 1) In this case, we know your BIOS is executing. The flashing of the keyboard lights is a positive sign. It means the processor is executing (so the processor does not need to be reseated), the BIOS code was executed (so the BIOS isn't completely fried - the main block of BIOS code has probably passed the checksum test). I'm not sure about RAM. Maybe the RAM test would still be an item yet to be completed by the BIOS. 2) Turn off the computer and unplug it. To work inside, you want all power removed (not for risk of shock or anything - it is to protect your hardware). The reason for unplugging, is to make sure +5VSB is disabled, and that there is no power present in the RAM slots. At least one poster with a broken computer here, had a power supply with a broken switch, and the power supply was on, even though the power switch was set to off. Unplugging ensures there aren't any incidents like that. Remove and reseat the RAM. 3) If you have multiple sticks of RAM, try the machine with only one of the sticks plugged in. That may not be enough memory, for an OS to boot properly, so may not represent a usable system configuration. But the purpose of inserting only one stick of RAM, is to see if you can get the BIOS screen to appear. If a stick of memory goes bad, it may prevent POST. In some cases, the computer beeps if the memory is bad. But it is also possible the BIOS just hangs. 4) Clearing the CMOS is a good test. But you'll also have to restore any custom settings in the BIOS. And I have to admit, on my oldest machine, when the CMOS battery died, I was at a loss to remember what some of the settings did. It did take me an hour or so of experimenting, until I got the hang of it, and the machine was able to boot with a new CMOS battery. While power supply failures on computers are a frequent source of problems (and not completely eliminated in your case), the fact that the keyboard lights blinked gives me hope that the power is good enough to allow the POST process to get further than it currently is. For example, a computer that restarts, just as the Windows desktop appears, could be having a power problem. But in your case, the power consumption should be reasonably stable during some of the BIOS tests, and the BIOS doesn't appear to be getting past things like NVRAM or RAM test, or enumerating hard drives and optical drives. Paul Thanks for all the advice, this goes for those posting after this message as well. Here's what I have done so far: I took my TV-card out - No change All external devices are unplugged (only monitor, keyboard and power are connected) - No change Took the CMOS battery out, left it for 10 minutes (power cable unplugged), then restarted - No change Then I took my video card out, although I can't see anything the computer suddenly started bleeping (when starting it) and at least my keyboard seems to be responding (num-lock light goes on/off when I press num-lock). Does that mean my video card is busted? I don't have a spare on, so I can't really test it. The only spare one I have doesn't fit in the slots on my mainboard. Thanks, twomt. |
#10
|
|||
|
|||
Computer won't start
twomt wrote:
Paul wrote: twomt wrote: Joel wrote: twomt wrote: Hello, I fear I have a hardware problem somewhere, can someone give me some hints on how to locate the root cause? The computer is getting power as the fan is blowing normal and the keyboard lights (caps-lock, num-lock and scroll-lock) blink once when I press the power button. Then it all stops, well... the fan continue to blows but nothing else happens. This is before the bios screens come up when you initially start your computer. The monitor turns itself off saying it does not receive a signal, the keyboard is not responding to anything (normally, num-lock would show the light on/off) and my optical mouse is not showing the red lights it normally does. I've let it run for a while, but the state does not change.... it's broken :s Any ideas what might be causing? Me? these are what I usually do. 1. I read and learn thing *before* thing starts happening to my system as many and I doing at the moment. What I am trying to do is encouraging others to take a opportunity for future problem. 2. I would try to see *if* it causes by hardware or software. - Hardware - I would go to CMOS setting screen, and often most problems solve itself just by entering the CMOS setting. Or usually the CMOS will detect something changed and recogize and fix itself. Then check either Power-supply, memory, video, audio cards etc. make sure them have good connection. - Software, then sometime just boot to .. I forget what it's called .. ohh "Safe Made" can sold some software/hardware related issue itself. Or on safe mode Windows may have to load some specific program, then update the working Windows to normal boot. Yes, sometime it's so weird but works sometime Or booting using util like util called "Winternal" and I don't know exactly what it does, but my systems with booting issue were solved by just boot with "Winternal". But I ain't recognize to jump straight to Winternal without taking a chance to learn what's going on. Thanks, twomt 1. I am not getting this statement... 2. CMOS, as I wrote the PC locks up / stops booting before this point. I haven't been able to get into the CMOS. Because it already happens at this point, I am suspecting a hardware or bios issue. If it was software, I would imagine that it would stop only at a later point. I've already unplugged the cards and stuck them back in, no change. As most of the stuff is on-board, I can't do a lot with it anyway. The other option to reset the CMOS is probably the best way to go forward for now. And perhaps to find a spare-parts PC that I can use to see if I can locate the root cause. But thanks for your response anyway. Some simple things you can try, are disconnecting I/O devices from the machine. For example, disconnect the USB devices outside the case first. If some I/O device has died or is malfunctioning, they may be confusing the BIOS. Open the machine, disconnect the data cables from the hard drive and CDROM drive. Using a piece of paper, make notes of where the cables go, so you can put them back exactly as you found them. Other checklist items: 1) In this case, we know your BIOS is executing. The flashing of the keyboard lights is a positive sign. It means the processor is executing (so the processor does not need to be reseated), the BIOS code was executed (so the BIOS isn't completely fried - the main block of BIOS code has probably passed the checksum test). I'm not sure about RAM. Maybe the RAM test would still be an item yet to be completed by the BIOS. 2) Turn off the computer and unplug it. To work inside, you want all power removed (not for risk of shock or anything - it is to protect your hardware). The reason for unplugging, is to make sure +5VSB is disabled, and that there is no power present in the RAM slots. At least one poster with a broken computer here, had a power supply with a broken switch, and the power supply was on, even though the power switch was set to off. Unplugging ensures there aren't any incidents like that. Remove and reseat the RAM. 3) If you have multiple sticks of RAM, try the machine with only one of the sticks plugged in. That may not be enough memory, for an OS to boot properly, so may not represent a usable system configuration. But the purpose of inserting only one stick of RAM, is to see if you can get the BIOS screen to appear. If a stick of memory goes bad, it may prevent POST. In some cases, the computer beeps if the memory is bad. But it is also possible the BIOS just hangs. 4) Clearing the CMOS is a good test. But you'll also have to restore any custom settings in the BIOS. And I have to admit, on my oldest machine, when the CMOS battery died, I was at a loss to remember what some of the settings did. It did take me an hour or so of experimenting, until I got the hang of it, and the machine was able to boot with a new CMOS battery. While power supply failures on computers are a frequent source of problems (and not completely eliminated in your case), the fact that the keyboard lights blinked gives me hope that the power is good enough to allow the POST process to get further than it currently is. For example, a computer that restarts, just as the Windows desktop appears, could be having a power problem. But in your case, the power consumption should be reasonably stable during some of the BIOS tests, and the BIOS doesn't appear to be getting past things like NVRAM or RAM test, or enumerating hard drives and optical drives. Paul Thanks for all the advice, this goes for those posting after this message as well. Here's what I have done so far: I took my TV-card out - No change All external devices are unplugged (only monitor, keyboard and power are connected) - No change Took the CMOS battery out, left it for 10 minutes (power cable unplugged), then restarted - No change Then I took my video card out, although I can't see anything the computer suddenly started bleeping (when starting it) and at least my keyboard seems to be responding (num-lock light goes on/off when I press num-lock). Does that mean my video card is busted? I don't have a spare on, so I can't really test it. The only spare one I have doesn't fit in the slots on my mainboard. Thanks, twomt. Oh, one last detail... there's a fan on the video card as well and that one is not working. -- ------------------------------------------ Nemesis War Online browser based space combat game. It's free, it's great, you'll love it. Come join us at http://www.nemesiswar.net/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
computer won't start! | [email protected] | Overclocking AMD Processors | 6 | March 6th 07 10:33 PM |
Computer won't start - Help please | BH2 | Homebuilt PC's | 3 | February 14th 07 09:26 AM |
Computer does not start sometimes! | [email protected] | Homebuilt PC's | 3 | November 16th 06 12:11 AM |
Need Help Computer will not start up | JD | General Hardware | 5 | December 7th 03 10:17 AM |
computer will not start | James Walker | Overclocking AMD Processors | 3 | July 9th 03 10:58 AM |