Does choice of PCI-slot matter with Windows 2000 installed in ACPI mode?

Does it matter, which PCI-slots I choose for my PCI-cards? Usually I'd
like to say yes, because of the shared-IRQ issue.

However, with Windows 2000 installed in ACPI mode (device manager
shows under the entry "computer" the entry "ACPI-PC"), Windows seems
to assign all PCI-cards the *same* IRQ anyhow. So one might think it
totally does not matter anymore, which PCI-slot to choose for the
different PCI-cards.

Am I wrong?

My system setup is this:

Motherboard: ABIT ST6 with newest BIOS-Version 9P
CPU : Pentium III Tualatin FCPGA-2 1 GHz
Grafics : ATI Radeon 9000
USB2 : Adaptec AUA-2000LP (two USB 2.0 ports)
WLAN : D-Link AirPlus DWL-520+
Printer : HP Deskjet 1220C



XXCCII W2K

In article ,
says...
Does it matter, which PCI-slots I choose for my PCI-cards? Usually I'd
like to say yes, because of the shared-IRQ issue.

However, with Windows 2000 installed in ACPI mode (device manager
shows under the entry "computer" the entry "ACPI-PC"), Windows seems
to assign all PCI-cards the *same* IRQ anyhow. So one might think it
totally does not matter anymore, which PCI-slot to choose for the
different PCI-cards.

Am I wrong?

No, you're correct. The only thing to take into account is a decent
airflow for the AGP card cooling fan.


--
________________________
Conor Turton

________________________

in most cases....however some older modems and NIC's will only install if you turn off PNP OS installed in the BIOS, then use
whatever PCI slot. PCI #1 should still be avoided if possible


"Bernd Bubis" wrote in message m...
Does it matter, which PCI-slots I choose for my PCI-cards? Usually I'd
like to say yes, because of the shared-IRQ issue.

However, with Windows 2000 installed in ACPI mode (device manager
shows under the entry "computer" the entry "ACPI-PC"), Windows seems
to assign all PCI-cards the *same* IRQ anyhow. So one might think it
totally does not matter anymore, which PCI-slot to choose for the
different PCI-cards.

Am I wrong?

My system setup is this:

Motherboard: ABIT ST6 with newest BIOS-Version 9P
CPU : Pentium III Tualatin FCPGA-2 1 GHz
Grafics : ATI Radeon 9000
USB2 : Adaptec AUA-2000LP (two USB 2.0 ports)
WLAN : D-Link AirPlus DWL-520+
Printer : HP Deskjet 1220C



XXCCII W2K