If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
5400 rpm hard drive cable is EIDE??
I am buying a 5400rpm hard drive and external case that is EIDE comaptible.
Will the pins on the hard drive match that cable ok? and will this idea work?? tia |
#2
|
|||
|
|||
On Tue, 24 May 2005 12:18:08 -0300, "news_reader"
wrote: I am buying a 5400rpm hard drive and external case that is EIDE comaptible. Will the pins on the hard drive match that cable ok? and will this idea work?? tia 5400 RPM doesn't tell us what interface the hard drive uses. "Many" if not most would be EIDE, that is, ATA33, ATA66, or ATA100... maybe even ATA133 for a late 5400 RPM drive but the specific drive and it's specs will tell you. |
#3
|
|||
|
|||
Thanks Kony, any suggestions on a External Hard Drive enclosure? Fan or
fanless for this drive, which is a Maxtor 16 model "news_reader" wrote in message ... I am buying a 5400rpm hard drive and external case that is EIDE comaptible. Will the pins on the hard drive match that cable ok? and will this idea work?? tia |
#4
|
|||
|
|||
On Tue, 24 May 2005 17:05:30 -0300, "news_reader"
wrote: Thanks Kony, any suggestions on a External Hard Drive enclosure? Fan or fanless for this drive, which is a Maxtor 16 model "news_reader" wrote in message ... I am buying a 5400rpm hard drive and external case that is EIDE comaptible. Will the pins on the hard drive match that cable ok? and will this idea work?? tia Maxtor 16 series is a PATA (133) drive, so you should be able to take your pick of any modern enclosure that supports larger (48bit LBA, 128GB) EIDE/ATA drives. |
#5
|
|||
|
|||
Is cooling necessary??
"kony" wrote in message ... On Tue, 24 May 2005 17:05:30 -0300, "news_reader" wrote: Thanks Kony, any suggestions on a External Hard Drive enclosure? Fan or fanless for this drive, which is a Maxtor 16 model "news_reader" wrote in message ... I am buying a 5400rpm hard drive and external case that is EIDE comaptible. Will the pins on the hard drive match that cable ok? and will this idea work?? tia Maxtor 16 series is a PATA (133) drive, so you should be able to take your pick of any modern enclosure that supports larger (48bit LBA, 128GB) EIDE/ATA drives. |
#6
|
|||
|
|||
On Tue, 24 May 2005 21:53:49 -0300, "news_reader"
wrote: Is cooling necessary?? For longest life, yes. The lower RPM should help some but if you were to be running it constantly rather that powering it up for backups then shutting it off again, I'd want active (fan) cooling. Then again if you would leave it running constantly an internal drive may be a better solution. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seagate 7200.8 133GB per disc? | Andreas Wohlfeld | Storage (alternative) | 11 | February 19th 05 11:35 AM |
Network File Server | Bob | Storage (alternative) | 37 | May 4th 04 09:07 PM |
two hd's on same IDE channel | Steve James | General | 25 | March 13th 04 12:06 AM |
Need *HELP* retrieving data off failed hard drive - sources of info greatly appreciated | Stellijer | Storage (alternative) | 36 | December 19th 03 07:53 PM |
Adding further hard drive - how to?! | Pete Stockdale | Storage (alternative) | 5 | June 28th 03 11:00 PM |