New Boxen problem; any ideas?

On Thu, 12 Aug 2004 16:49:47 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:37:48 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 21:49:26 +0200, ByteCoder wrote:

Onideus Mad Hatter wrote:

On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:


On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:


On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:


On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:


On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:


Mimic wrote:


Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP


If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

You should know that most commercial DVDs are on a dual layer DVD.
That's twice the size of a normal DVD-R...

You should know that BenQ came out with the first dual layer DVD writer like 3 months ago, where the
**** have you been? I mean, come on, technology waits for no one, if you can't keep up take notes.


SPANK!

Quit piddling yourself you diaper wearing FREAK.

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 16:53:16 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:43:23 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 16:05:17 -0400, "Meat--Plow" wrote:

http://www.elby.ch/products/clone_dvd/

CloneDVD 2


* Copies the main movie, Special Features and/or the
original menu onto a DVD Recordable or onto your harddisk

* Newly revamped transcoder: Better picture quality also at
high reduction rates (footage of more than two hours)


What does a transcoder do Poor Wittle Diaper Boi ? Does it
power your SOOPER XENON BEST COMPONENTS NEVER CRASHES Xp box
? Does it play MP3? XBox Games?


Make sure you snip all of this from your reply

HAH ! I've got your dance choreographed right down to the
last step.

Boy are you just makin yourself look like a ****ing MORON, if it's still in the same format, in this
case MPEG-2, then it's transcoding you ****ing MORON. If you're going from one format to another
like MPEG-2 to an MPEG-4 based codec like Xvid, then it's REENCODING. And the very fact that you
use CloneDVD at all...man oh man, what a ****ing GOOBER. That's like going around telling people
you're the **** cause you just got ONLINE...you know, with yer ****in WebTV box... *shakes head*

SPNAK !

Yes Diaper Boi we all know

You are better
Your computer is better
Everyone besides you is worthless

You are the big bad Diaper Boi

Oh and you and your mom have a Cock-Eye BTW


Poor Baby Fett, got smacked real hard again and couldn't formulate a counter argument. It's okay,
Butt-Plow, no one would ever expect someone of your intelligence to be using anything other than
ConeDVD. ^_^

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

Onideus Mad Hatter wrote:
On Thu, 12 Aug 2004 21:49:26 +0200, ByteCoder wrote:


Onideus Mad Hatter wrote:


On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:



On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:



On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:



On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:



On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:



On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:



Mimic wrote:



Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP


If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

You should know that most commercial DVDs are on a dual layer DVD.
That's twice the size of a normal DVD-R...


You should know that BenQ came out with the first dual layer DVD writer like 3 months ago, where the
**** have you been? I mean, come on, technology waits for no one, if you can't keep up take notes.

I know, but dual layer DVD disks still cost about 20 dollars each...

--
-------------
- ByteCoder - ... I see stupid people
-------------

On Thu, 12 Aug 2004 17:11:07 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:59:01 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 16:40:44 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:32:24 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 15:57:14 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:08:31 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:56:21 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:39:40 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 11:14:41 +0000 (UTC), Lensman wrote:

Onideus Mad Hatter wrote :

*Hatter reels in a newr kooktard*

Dream on, monkey boy

Awww, you don't wanna play? Just look at lil Butt-Plow! Don't you wanna go all crazy and obsesso
and follow up my every post screaming for my attention? ^_^

It serves its puSLAP

Hey look at that, a visual! Thanks for being stupid and obsessed Baby Fett, it's quite
entertaining! ^_^

Poor litSLAP

Lookit him go! ROTFL...he's like my own personal little stupid-in-box, wind him up and POP goes the
retard!

Poor litSLAP

Jump retard, jump!


From: Onideus Mad Hatter
Newsgroups: alt.2600
Subject: Fukk you Hatter.....
Date: Wed, 28 Jul 2004 12:17:14 -0700
Organization: Posted via Supernews, http://www.supernews.com
Message-ID: ufufg0pkkhmi3rm1kk6p3s19d50m6219qk@farfoos
References: ejkbg05tqdvuspqmkusmupq78pt0aja6mt@farfoos

MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
X-Complaints-To:
Lines: 38


On Wed, 28 Jul 2004 11:15:54 -0700, yellowcake wrote:

Meat--Plow wrote:
On Wed, 28 Jul 2004 15:49:03 +0200, Hans van Eynsbergen
,wrote:


On Wed, 28 Jul 2004 04:13:30 GMT, Rev Turd Fredericks surprised everyone on
Usenet by scribbling:

snip

I no longer eat bread, at least not regularly, but I sure can appreciate
it when it's good, that's what made me so god damned fat :-(

Cant have been the bread, but what you put on the bread and that giant
dollop of mayonnaise......


Yeh just ask Diaper Boi.

Damn, you are a persistent fanboi, I'll give you that!

I wonder if he knows that I put him back in my kill filter for another 6 months... ^_^

And here is the part I like.

His obsession isn't without a real cause though, Meat-Plow is an adult baby/diaper lover and, well,
I kinda did some not very nice things to them at one point in time. Although even Plow isn't the
kookiest of em, there was this one guy in that community by the name of Adam Netterville...WOW...he
went so far as to try and get me blacklisted with various colleges that specialize in psychology,
claimed I was performing unethical sociological and psychological experiments on people. He even
e-mailed Zandra from Petitmorte and started harrassing her about me (apparently he somehow thought
she was my ISP or something). *rolls eyes*


I'm in hiSLAP

Go retard, go retard, go!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 13:59:41 -0700, Onideus Mad Hatter surprised everyone
on Usenet by scribbling:

On Thu, 12 Aug 2004 16:38:41 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:34:05 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 15:58:53 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:11:16 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:37:20 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:31:04 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 10:44:26 -0400, "Meat--Plow" wrote:

My Prescott draws 90 more watts when it's transcoding MPEG-2 as in shrinking
down DVD files to fit on a DVD-R wink

...um...unless you're going from DVD to SVCD the only thing that can be "transcoded" on a DVD is the
audio you ****ing nimrod. And why would you need to "shrink" a DVD to fit on a DVD-R? I mean, uh,
****ing hello, THEY'RE THE SAME SIZE! o_O

My Prescott also warms from 50 into the 60's when it's thumping. The chipset
also warms but not that much. I replaced with a Northbridge chip of the same
speed as my Prescott and it did not heat near as much nor did it draw near the
wattage. But it also took longet to process video.

That's all that box does, video. I won't clutter it with a bunch of crap it
doesn't need on it. XP can spiral down the toilet with a bunch of non-essentials
installed within it.

...wait, wait, wait...you're claiming to transcode DVDs and you're not running WinXP? And just HOW
are you doing that, praytell? Oh free cl00, there *IS* a way to do it on a Win98 machine, I'm just
checking to see if you actually know what it is or not. ^_^

10 to 1 says your video encoding experience doesn't extend any farther than the default settings in
Auto-Gordian Knot.

One thing for certain is make sure the power supply is adequate with a Prescott
CPU. 380 watts min for a 2.8 and normal perhips.

Retardo here obviously hasn't given any thought in WHAT BRAND of power supply you should buy.

Shut uSLAP

Awww, don't you wanna try and counter anything I've said? Tsch, tsch, tsch...sure is a bitch when
you trip and make yourself look stupid, huh Baby Fett? Tell us about your "transcoding" DVDs to fit
on DVD-Rs again, that was REALLY funny! You know, my only regret is not xposting my reply to
rec.video.desktop, after all, EVERYONE should be able to share in the laughter and entertainment
that is the stupidity of an obsessed adult baby like Butt-Plow!

Poor witSLAP

Jump retard, jump!

Go retard, go retard, go!

BWAHAHAHAHA...gawd I love having obsessed lil fan girls, they're so cute!

DaSLAP

Jump retard, jump!

Oh please, Hatter ! stop it will you !
I'm getting sick and tired -again- of your lack of respect for other
opinions !
I don't mind a good fight, but please show a little respect !
(My 2 cents, not much, but alas)
--
Hans van Eynsbergen
Rotterdam is http://tinyurl.com/xpkv
And as a finishing touch, God created the Dutch.
Ask me why and I'll spit in your eye.

On Thu, 12 Aug 2004 13:38:30 -0700, Onideus Mad Hatter surprised everyone
on Usenet by scribbling:

snip
Lookit him go!
http://www.backwater-productions.net...es/licking.gif

And this, my friends, is the ultimate result Backwater productions has ever
managed to achieve !
Yawn.....
(Sorry, Hatter, but that is just bull****)
--
Hans van Eynsbergen
Rotterdam is http://tinyurl.com/xpkv
And as a finishing touch, God created the Dutch.
Ask me why and I'll spit in your eye.

On Thu, 12 Aug 2004 17:12:14 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:59:41 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 16:38:41 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 13:34:05 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 15:58:53 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 12:11:16 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 14:37:20 -0400, "Meat--Plow" wrote:

On Thu, 12 Aug 2004 11:31:04 -0700, Onideus Mad Hatter
,wrote:

On Thu, 12 Aug 2004 10:44:26 -0400, "Meat--Plow" wrote:

My Prescott draws 90 more watts when it's transcoding MPEG-2 as in shrinking
down DVD files to fit on a DVD-R wink

...um...unless you're going from DVD to SVCD the only thing that can be "transcoded" on a DVD is the
audio you ****ing nimrod. And why would you need to "shrink" a DVD to fit on a DVD-R? I mean, uh,
****ing hello, THEY'RE THE SAME SIZE! o_O

My Prescott also warms from 50 into the 60's when it's thumping. The chipset
also warms but not that much. I replaced with a Northbridge chip of the same
speed as my Prescott and it did not heat near as much nor did it draw near the
wattage. But it also took longet to process video.

That's all that box does, video. I won't clutter it with a bunch of crap it
doesn't need on it. XP can spiral down the toilet with a bunch of non-essentials
installed within it.

...wait, wait, wait...you're claiming to transcode DVDs and you're not running WinXP? And just HOW
are you doing that, praytell? Oh free cl00, there *IS* a way to do it on a Win98 machine, I'm just
checking to see if you actually know what it is or not. ^_^

10 to 1 says your video encoding experience doesn't extend any farther than the default settings in
Auto-Gordian Knot.

One thing for certain is make sure the power supply is adequate with a Prescott
CPU. 380 watts min for a 2.8 and normal perhips.

Retardo here obviously hasn't given any thought in WHAT BRAND of power supply you should buy.

Shut uSLAP

Awww, don't you wanna try and counter anything I've said? Tsch, tsch, tsch...sure is a bitch when
you trip and make yourself look stupid, huh Baby Fett? Tell us about your "transcoding" DVDs to fit
on DVD-Rs again, that was REALLY funny! You know, my only regret is not xposting my reply to
rec.video.desktop, after all, EVERYONE should be able to share in the laughter and entertainment
that is the stupidity of an obsessed adult baby like Butt-Plow!

Poor witSLAP

Jump retard, jump!

Go retard, go retard, go!

BWAHAHAHAHA...gawd I love having obsessed lil fan girls, they're so cute!

DaSLAP

Jump retard, jump!

From: Onideus Mad Hatter
Newsgroups: alt.2600
Subject: Fukk you Hatter.....
Date: Wed, 28 Jul 2004 12:17:14 -0700
Organization: Posted via Supernews, http://www.supernews.com
Message-ID: ufufg0pkkhmi3rm1kk6p3s19d50m6219qk@farfoos
References: ejkbg05tqdvuspqmkusmupq78pt0aja6mt@farfoos

MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 8bit
X-Complaints-To:
Lines: 38




I wonder if he knows that I put him back in my kill filter for another 6 months... ^_^

LOL!

His obsession isn't without a real cause though, Meat-Plow is an adult baby/diaper lover and, well,
I kinda did some not very nice things to them at one point in time. Although even Plow isn't the
kookiest of em, there was this one guy in that community by the name of Adam Netterville...WOW...he
went so far as to try and get me blacklisted with various colleges that specialize in psychology,
claimed I was performing unethical sociological and psychological experiments on people. He even
e-mailed Zandra from Petitmorte and started harrassing her about me (apparently he somehow thought
she was my ISP or something). *rolls eyes*

SPNSLAP

Go retard, go retard, go!

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 14:02:15 -0700, Onideus Mad Hatter surprised everyone
on Usenet by scribbling:

snip

Hatter,

ByteCoder suggested that you post some pics of the innards of that puter of
yours.
You answered with some excuse, valid or not, I don't care.
But what DOES intrigue me, why don't you post some nice pics on Backwater
of said puter ?
I really start to wonder about that big monster of yours !
I just wanna know if "yours" is bigger then" mine"...cuz I gots a big one !
Puter that is....

--
Hans van Eynsbergen
Rotterdam is http://tinyurl.com/xpkv
And as a finishing touch, God created the Dutch.
Ask me why and I'll spit in your eye.

On Thu, 12 Aug 2004 23:10:50 +0200, ByteCoder wrote:

Onideus Mad Hatter wrote:
On Thu, 12 Aug 2004 21:49:26 +0200, ByteCoder wrote:


Onideus Mad Hatter wrote:


On Thu, 12 Aug 2004 14:40:18 -0400, "Meat--Plow" wrote:



On Thu, 12 Aug 2004 11:32:07 -0700, Onideus Mad Hatter
,wrote:



On Thu, 12 Aug 2004 10:45:26 -0400, "Meat--Plow" wrote:



On Wed, 11 Aug 2004 13:51:13 -0700, Onideus Mad Hatter
,wrote:



On Wed, 11 Aug 2004 16:17:29 -0400, "Meat--Plow" wrote:



On Wed, 11 Aug 2004 19:10:51 +0100, Mimic dev@null,wrote:



Mimic wrote:



Just built my new box and its running ridiculously slow. just over 2mins
to boot to the login prompt then a further 1min 20 to get to the
desktop, its a new install of xp pro. The spec is as follows, a couple
things, it has dumped after a bugcheck a couple times, last time i had
this it was due to overclocked ram. I manually set this ram to its speed
with no joy. Also, im running it off a 300w PSU [i have a 400 on the
way] atm, which I know is causing other problems [reboots when i turn on
the light tubes hehe]. But that wouldnt be the cause of this would it ?

Anyway, any ideas would be GREATLY appreciated as this is sposed to be
the hype box that is replacing my fast, stable, 4yo duron800 machine :P

P4 2.8 Prescott [1mb L2 cache, 800/HT] @ 50 deg C
512 DDR 2700 [333]
Asus Board, supporting Prescott, HT and 800fsb @ 27 deg C
256mb Geforce4 gfx card
1 Zalman Fan controller
1 multifunctional docking bay [mem cards, usb, f/wire etc]
1 DVDrom
1 DVDRW
3 Case fans
5 inline led's.
[the tubes are always turned off atm]

If you need the exact part specs just shout.

thx


sorry, and a 40GB hdd @ 5400, and a 80GB hdd @ 7200 :P

New install of XP should boot up faster than that even if you're booting from
the 4500 rpm drive. Leave the RAM to be configured by SPD. Look in the system
and application event viewer for any red X's. That 300 watt supply is right on
the edge of not being adequate because that system can draw 300 watts when the
Prescott is thumping. I know, I have one on an Intel mobo.

Cause gosh knows the CPU is gonna be clockin at full power during the boot up you ****ing MORON.

Shut up Diaper Boi, nobody wants you in this thread. You've been told this by
many.

Free cl00, Diaper Bitch, reaching critical stupid and having a lil kookplosion all over A26 does not
magically make you "many", it just makes you an idiot.


Nobody care what youSLAP


If nobody cared, why would they respond? ^_^

And uh...hrmmm...you respond more than ANYONE, obsesso.

BTW, speaking of lying, tell us all about how you're "transcoding" DVDs to fit on DVD-Rs again, that
was just a ****ing RIOT! `, D

You should know that most commercial DVDs are on a dual layer DVD.
That's twice the size of a normal DVD-R...


You should know that BenQ came out with the first dual layer DVD writer like 3 months ago, where the
**** have you been? I mean, come on, technology waits for no one, if you can't keep up take notes.

I know, but dual layer DVD disks still cost about 20 dollars each...

You can get em for around $14 including shipping:
http://www.meritline.com/dl-dvd-r-du...-verbatim.html

Still cheaper than actually buying the DVDs in most cases. ^_^

Personally I rip and encode everything into Xvid and then use mobile rack, removable 250GB HDs to
store all the stuff on. So like I have drives just for movies, for anime, for TV shows, etc, etc.
Most 7 season TV series, like DS9 for example take up around 65GBs worth of space so I can store
about 3 to 4 series on one HD. So then when I wanna watch something I just pop in the HD I want
into the entertainment system, boot it up, turn on the projector and speakers and VIOLA, ready to
watch.

My entertainment system is a SimpleMax Micro Slim Desktop Case with a Asus A7V8X-MX motherboard,
AthlonXP 2000 cpu, 1gig of Infineon memory, a Radeon 9000 all-in-wonder, an internal 250GB Maxtor HD
and a 3COM Ezpro 735 XGA projector.

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net

On Thu, 12 Aug 2004 23:33:35 +0200, Hans van Eynsbergen wrote:

Hatter,

ByteCoder suggested that you post some pics of the innards of that puter of
yours.
You answered with some excuse, valid or not, I don't care.

Hey look at that, we both don't care! ^_^

But what DOES intrigue me, why don't you post some nice pics on Backwater
of said puter ?
I really start to wonder about that big monster of yours !
I just wanna know if "yours" is bigger then" mine"...cuz I gots a big one !
Puter that is....

Oh bother, that would require me to like go and get the digital camera, and then I'm gonna have to
charge the lil *******, then I'd have to actually TAKE the pictures, then upload them to my system,
then convert them, then upload them to the server...*sigh*...I just can't be arsed at the
momemnt...hell I couldn't even be arsed to put up the pictures of the frelling keeristmas cookies up
on teh Flonk image server when Incantrix asked me to...and those have already been converted and
everything! o_O

Maybe on Friday I'll put up some pictures. Not of Hikaru Sen though, she's not finished yet (which
is actually the main reason why I've only taken a couple pics of the temprature controler). Cause,
the memory heat spreaders are copper, I haven't finished putting all the red wire sleeves on and
don't even get me started on the trouble I've had with Staples and their idiotic "static sticky
paper" (which doesn't work worth a **** btw).

It's not all about the hardware you know, it's also about the STYLE!

The other thing I need to finish is the keyboard. I got one of those ancient IBM keyboards, the
kind that have that really cool clickity sound and I'm working on repainting it and changing out the
all the LEDs so that it matches the case.

--

Onideus Mad Hatter
mhm ¹ x ¹
http://www.backwater-productions.net