A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Cdr
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Nero and dvd-r failure



 
 
Thread Tools Display Modes
  #1  
Old February 5th 04, 07:33 AM
Blair Wilson
external usenet poster
 
Posts: n/a
Default Nero and dvd-r failure


"Blair Wilson" wrote in message news:...
HELP NEEDED!!


I am unable to create DVDs using Nero 6.3.0.2 and (TDK/Imation) 4x DVD-Rs
(the 2.x blanks fail too). I get a lot of scsi/sense key errors. Has
anybody experience this type of problem? I can burn DVD+R with Nero and
(TDK/Imation) blanks DVDs with no problem. My DVD burner is a Sony
DRU-510A. The OS is Windows XP Pro SP1. The drivers are ASPI32.SYS ver
4.60 and Imagedrv.sys ver 2.23.0.0. I have attached the log file from the
burn failure. An.all suggestions are welcomed. As always thanks in

advance.


Blair Wilson
BlayrNet Inc
1A23-0031-5030-1517-2237-6875

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created
9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll':
Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.2
Recorder: SONY DVD RW DRU-510A Version: 1.0f - HA 5 TA

0 -
6.3.0.2
Adapter driver: HA 5
Drive buffer : 8192kB
Bus Type : default (0) - ATAPI, detected: ?
CD-ROM: NERO IMAGEDRIVE2 Version: 1.0h - HA 0 TA

0 -
6.3.0.2
Adapter driver: Imagedrv HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0
DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 1
DMA: Off
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 1 ID 0
DMA: Off
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 2 ID 0
DMA: On
DiskPeripheral : WDC WD1000BB-00CAA0 atapi Port 2 ID 1
DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 3 ID 0
DMA: On
DiskPeripheral : HP 9.10GB A 80-S94CS94C aic78xx Port 4 ID 0
DMA: Off
TapePeripheral : QUANTUM DLT7000 1624 aic78xx Port 4 ID 4
DMA: Off
CdRomPeripheral : PLEXTOR CD-ROM PX-40TS 1.01 aic78xx Port 4 ID 6
DMA: Off

=== CDRom-Device-Map ===
NERO IMAGEDRIVE2 N: CDRom3
NERO IMAGEDRIVE2 O: CDRom4
ELBY DVD-ROM M: CDRom2
LITE-ON LTR-52246S K: CDRom1
PLEXTOR CD-ROM PX-40TS J: CDRom0
SONY DVD RW DRU-510A L: CDRom5
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 216MB (221360kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.2.2004
ISO compilation
10:55:10 PM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:55:10 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

10:55:10 PM #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-510A running

10:55:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

10:55:11 PM #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

10:55:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2205839 (490:11.14, 4308MB)

10:55:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

10:55:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193

10:55:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 406
Protocol of DlgWaitCD activities:

=========================================

10:55:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2205840 (2205840) = #2205840/490:11.15
relocatable, disc pos for caching/writing not required/required, no
patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2205840 blocks [SONY DVD RW DRU-510A ]
--------------------------------------------------------------

10:55:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4517560320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2205840 | lead-out | 1 | 0x00 | 0x41

10:55:11 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

10:55:11 PM #13 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

10:55:11 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

10:55:11 PM #15 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

10:55:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

10:55:12 PM #17 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 13:41,294 (821294ms) - OK

10:55:12 PM #18 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

10:55:12 PM #19 Text 0 File Mmc.cpp, Line 19451
Set BUFE: Power-Burn - ON

10:55:12 PM #20 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

10:55:12 PM #21 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structu Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: not specified (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM,

DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

.................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

.................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

.................

10:55:13 PM #22 Text 0 File Cdrdrv.cpp, Line 1277
22:55:13.888 - SONY DVD RW DRU-510A\H5 T0 : Queue again later

10:55:20 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03260000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

10:55:20 PM #24 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
SONY DVD RW DRU-510A\H5 T0

10:55:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:55:20 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:55:20 PM #27 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 2239

10:56:21 PM #28 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) - OK

10:56:21 PM #29 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) - OK

10:56:21 PM #30 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created
9/10/1999 12:06:00 PM
File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created
12/19/2003 7:48:40 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs

:
0 (Security Option)

Blair





  #2  
Old February 5th 04, 08:23 AM
smh
external usenet poster
 
Posts: n/a
Default

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
(Mike Richter, any Material Connection w/ Roxio?)

http://groups.google.com/groups?selm...mindspring.com
(Messages 10, 12 -- 34, 54 -- 69)

( No pipsqueaks have been able to prove ANY of the above is a libel )
( -- despite Mikey's supposed to have proof of misquotes! )


Try the just released 6.3.0.3 ?

Blair Wilson wrote:

"Blair Wilson" wrote in message news:...
HELP NEEDED!!


I am unable to create DVDs using Nero 6.3.0.2 and (TDK/Imation) 4x DVD-Rs
(the 2.x blanks fail too). I get a lot of scsi/sense key errors. Has
anybody experience this type of problem? I can burn DVD+R with Nero and
(TDK/Imation) blanks DVDs with no problem. My DVD burner is a Sony
DRU-510A. The OS is Windows XP Pro SP1. The drivers are ASPI32.SYS ver
4.60 and Imagedrv.sys ver 2.23.0.0. I have attached the log file from the
burn failure. An.all suggestions are welcomed. As always thanks in

advance.


Blair Wilson
BlayrNet Inc
1A23-0031-5030-1517-2237-6875

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created
9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll':
Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.2
Recorder: SONY DVD RW DRU-510A Version: 1.0f - HA 5 TA

0 -
6.3.0.2
Adapter driver: HA 5
Drive buffer : 8192kB
Bus Type : default (0) - ATAPI, detected: ?
CD-ROM: NERO IMAGEDRIVE2 Version: 1.0h - HA 0 TA

0 -
6.3.0.2
Adapter driver: Imagedrv HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 0
DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 1.0h Imagedrv Port 0 ID 1
DMA: Off
CdRomPeripheral : ELBY DVD-ROM 1.0 ElbyVCD Port 1 ID 0
DMA: Off
DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 2 ID 0
DMA: On
DiskPeripheral : WDC WD1000BB-00CAA0 atapi Port 2 ID 1
DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 3 ID 0
DMA: On
DiskPeripheral : HP 9.10GB A 80-S94CS94C aic78xx Port 4 ID 0
DMA: Off
TapePeripheral : QUANTUM DLT7000 1624 aic78xx Port 4 ID 4
DMA: Off
CdRomPeripheral : PLEXTOR CD-ROM PX-40TS 1.01 aic78xx Port 4 ID 6
DMA: Off

=== CDRom-Device-Map ===
NERO IMAGEDRIVE2 N: CDRom3
NERO IMAGEDRIVE2 O: CDRom4
ELBY DVD-ROM M: CDRom2
LITE-ON LTR-52246S K: CDRom1
PLEXTOR CD-ROM PX-40TS J: CDRom0
SONY DVD RW DRU-510A L: CDRom5
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 216MB (221360kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.2.2004
ISO compilation
10:55:10 PM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:55:10 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

10:55:10 PM #3 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DRU-510A running

10:55:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

10:55:11 PM #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

10:55:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2205839 (490:11.14, 4308MB)

10:55:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

10:55:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193

10:55:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 406
Protocol of DlgWaitCD activities:

=========================================

10:55:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2205840 (2205840) = #2205840/490:11.15
relocatable, disc pos for caching/writing not required/required, no
patch infos
- TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2205840 blocks [SONY DVD RW DRU-510A ]
--------------------------------------------------------------

10:55:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [SONY DVD RW DRU-510A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4517560320, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2205840 | lead-out | 1 | 0x00 | 0x41

10:55:11 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

10:55:11 PM #13 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

10:55:11 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

10:55:11 PM #15 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

10:55:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos,
orig at #0): write at #0

10:55:12 PM #17 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 13:41,294 (821294ms) - OK

10:55:12 PM #18 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

10:55:12 PM #19 Text 0 File Mmc.cpp, Line 19451
Set BUFE: Power-Burn - ON

10:55:12 PM #20 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

10:55:12 PM #21 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structu Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: not specified (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM,

DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

................

10:55:13 PM #22 Text 0 File Cdrdrv.cpp, Line 1277
22:55:13.888 - SONY DVD RW DRU-510A\H5 T0 : Queue again later

10:55:20 PM #23 SCSI -500 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 5, TA 0, LUN 0, buffer 0x03260000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x08 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

10:55:20 PM #24 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
SONY DVD RW DRU-510A\H5 T0

10:55:20 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:55:20 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:55:20 PM #27 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 2239

10:56:21 PM #28 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) - OK

10:56:21 PM #29 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) - OK

10:56:21 PM #30 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (5,520 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created
9/10/1999 12:06:00 PM
File 'Drivers\imagedrv.sys': Ver=2.23.0.0, size=89184 bytes, created
12/19/2003 7:48:40 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs

:
0 (Security Option)

Blair



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.