If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Any tips on getting a AMD mobile 2500 to maxium possible speed ?
Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#2
|
|||
|
|||
BIOS 10
"OCZ Guy" wrote in message ... Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#3
|
|||
|
|||
Whats so good about bios 10 ? On Fri, 23 Jul 2004 11:53:37 +0000 (UTC), "Scumball" wrote: BIOS 10 "OCZ Guy" wrote in message .. . Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#4
|
|||
|
|||
"OCZ Guy" wrote in message ... Whats so good about bios 10 ? Always gets the best clocks. Isn't that what you were after ? On Fri, 23 Jul 2004 11:53:37 +0000 (UTC), "Scumball" wrote: BIOS 10 "OCZ Guy" wrote in message .. . Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#5
|
|||
|
|||
Yeah but why, what did they fix or not fix ?, take out put it taht stuffed the good clocks any idea ? On Fri, 23 Jul 2004 14:08:55 +0000 (UTC), "Von Gibbling" wrote: "OCZ Guy" wrote in message .. . Whats so good about bios 10 ? Always gets the best clocks. Isn't that what you were after ? On Fri, 23 Jul 2004 11:53:37 +0000 (UTC), "Scumball" wrote: BIOS 10 "OCZ Guy" wrote in message .. . Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#6
|
|||
|
|||
If you REALLY want the highest speed then liquid nitrogen cooling is the way
to go. -- *****Replace 'NOSPAM' with 'btinternet' in the reply address***** "OCZ Guy" wrote in message ... Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Any tips on getting a AMD mobile 2500 to maxium possible speed ? | OCZ Guy | Overclocking | 3 | July 23rd 04 08:39 PM |
Any tips on getting a AMD mobile 2500 to maxium possible speed ? | OCZ Guy | General | 0 | July 22nd 04 06:35 PM |
XP 2500 Mobile or regular? | johny | Overclocking AMD Processors | 4 | June 19th 04 06:06 PM |
Mobile Barton 2500 whats the maxium multiplier it has ? | Paul Mathews | Overclocking AMD Processors | 3 | June 18th 04 04:53 AM |
Athlon XP 2100+ to mobile 2600+ worth the upgrage? | yuki | Overclocking AMD Processors | 15 | April 13th 04 02:21 PM |