If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Any tips on getting a AMD mobile 2500 to maxium possible speed ?
Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
#2
|
|||
|
|||
You want to get to 220 or 230 fsb. Often this requires a simple Vchipset
mod so you can get to about 2.0v on the northbridge. See motherboardfaqs.org Also set memory timings to something like 12-3-2-2.0, depending on your ram. rms |
#3
|
|||
|
|||
2.0 volts safe ? I think my mobo maxes at 1.7 On Thu, 22 Jul 2004 19:44:34 GMT, "rms" wrote: You want to get to 220 or 230 fsb. Often this requires a simple Vchipset mod so you can get to about 2.0v on the northbridge. See motherboardfaqs.org Also set memory timings to something like 12-3-2-2.0, depending on your ram. rms |
#4
|
|||
|
|||
use Vodka
"OCZ Guy" wrote in message ... Any tips on getting a AMD mobile 2500 to maxium possible speed ? Using Abit NF7-S 2.0, bios 24 latest i think. Ive got it to 13 X 200 2600 ghz, 43c idle though not tested and running at that now, its at 1.9 volts might not need that to get it but put it their so it would atleast boot I tried 13.5 2700 ghz but pc just failed to boot. Iam using pc3200 OCZ LL Platium Ram and can get 200 fsb easy, should i try lower multipler and higher FSB, would that make a difference. I just have no idea what other settings in the bios may effect a good overclock, i mean at 43 idle the cpu has plenty ot room to overclock just need the right settings to do so. Just having fun and seeing how much i can push the cpu, would like to try to go over 2.7 ghz on air :0, if i can do that might try water cooling and try for 3.0 :-0, though that would be pushing it. If you can help please do, iam having so much fun overclocking. Thanks again. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Any tips on getting a AMD mobile 2500 to maxium possible speed ? | OCZ Guy | General | 0 | July 22nd 04 06:35 PM |
Is this mobile Barton 2500 a good overclocker ? | Phil Weldon | General | 7 | June 25th 04 01:44 AM |
Mobile 2500 barton what ram to use ? | Dennis E Strausser Jr | Overclocking | 7 | June 22nd 04 07:59 PM |
Mobile 2500 barton what ram to use ? | Scott Backular | General | 0 | June 21st 04 02:30 PM |
Is this mobile Barton 2500 a good overclocker ? | Phil Weldon | Overclocking | 0 | June 21st 04 05:08 AM |