If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
powernow on amd64
I currently have Cool N Quiet disabled in my BIOS. I didn't think it
would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? --JM |
#2
|
|||
|
|||
"Vermyndax" wrote in message ... I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? --JM Nice to see someone not bothered by fan noise. Beemer |
#3
|
|||
|
|||
"Vermyndax" wrote in message
... I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? Less heat = less noise = -- Derek |
#4
|
|||
|
|||
Sure runs cool, except under extended high load. Saves energy.
-- Ed Light Smiley :-/ MS Smiley :-\ Send spam to the FTC at Thanks, robots. |
#5
|
|||
|
|||
BTW It does require the AMD driver.
-- Ed Light Smiley :-/ MS Smiley :-\ Send spam to the FTC at Thanks, robots. |
#6
|
|||
|
|||
"Vermyndax" wrote in message
... I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? --JM Does it have anything to do with your processors health? I just upgraded and I was thinking of using it at nights when I download, little CPU power is needed and with summer coming it might heat up the room less (or less chance of overheating). New AMD 64 user |
#7
|
|||
|
|||
On Thu, 24 Mar 2005 10:05:23 -0600, Vermyndax wrote:
I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? By itself Cool N Quiet does nothing. But it has to be enabled to run powernow, which is the ability to lower vcore and multiplier while running. Th lowest setting on mine is , which it runs at least 95% of the time. When under a load it will jump to and when over under heavy load it will set the cpu vcore to default (1.5v) and raise the multuplier to default 10, on mine, for 2000MHz. The actual speed is determined by the FSB x multiplier. So if I had the FSB set to 210, the speeds would be 840,1890, and 2100MHz. With a cooler that automatically adjust fan speed, it would keep the fan speed down u at low settings when the cpu is at low speed, and raise fan speed when running max. With just a plain cooler, the speed never changes and it doesn't get any quieter unless you have software speed control like qfan or something. -- Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB) My server http://wesnewell.no-ip.com/cpu.php Verizon server http://mysite.verizon.net/res0exft/cpu.htm |
#8
|
|||
|
|||
On Thu, 24 Mar 2005 10:05:23 -0600, Vermyndax wrote:
I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? --JM It makes a huge difference, 99% of the time the CPU will be running at it's lowest clock speed which reduces the power enough so that the CPU fan isn't needed. |
#9
|
|||
|
|||
"Wes Newell" wrote in message
newsan.2005.03.24.20.54.51.940087@TAKEOUTverizon .net... On Thu, 24 Mar 2005 10:05:23 -0600, Vermyndax wrote: I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? By itself Cool N Quiet does nothing. But it has to be enabled to run powernow, which is the ability to lower vcore and multiplier while running. Th lowest setting on mine is , which it runs at least 95% of the time. When under a load it will jump to and when over under heavy load it will set the cpu vcore to default (1.5v) and raise the multuplier to default 10, on mine, for 2000MHz. The actual speed is determined by the FSB x multiplier. So if I had the FSB set to 210, the speeds would be 840,1890, and 2100MHz. With a cooler that automatically adjust fan speed, it would keep the fan speed down u at low settings when the cpu is at low speed, and raise fan speed when running max. With just a plain cooler, the speed never changes and it doesn't get any quieter unless you have software speed control like qfan or something. You don't have to have a smart cooler, some (all?) motherboards will control the fan speed; my K8N Neo does. -- Derek |
#10
|
|||
|
|||
On Thu, 24 Mar 2005 22:47:56 +0000, Derek Baker wrote:
"Wes Newell" wrote in message newsan.2005.03.24.20.54.51.940087@TAKEOUTverizon .net... On Thu, 24 Mar 2005 10:05:23 -0600, Vermyndax wrote: I currently have Cool N Quiet disabled in my BIOS. I didn't think it would have that big of an impact on my processor's health, so I switched it off. With WinXP 64-bit about to come out, I'm rethinking this. Is there anyone using it and what benefits has it provided you (if any)? By itself Cool N Quiet does nothing. But it has to be enabled to run powernow, which is the ability to lower vcore and multiplier while running. Th lowest setting on mine is , which it runs at least 95% of the time. When under a load it will jump to and when over under heavy load it will set the cpu vcore to default (1.5v) and raise the multuplier to default 10, on mine, for 2000MHz. The actual speed is determined by the FSB x multiplier. So if I had the FSB set to 210, the speeds would be 840,1890, and 2100MHz. With a cooler that automatically adjust fan speed, it would keep the fan speed down u at low settings when the cpu is at low speed, and raise fan speed when running max. With just a plain cooler, the speed never changes and it doesn't get any quieter unless you have software speed control like qfan or something. You don't have to have a smart cooler, some (all?) motherboards will control the fan speed; my K8N Neo does. I think that's exactly what I said. And the answer to your "(all?)' is no, not all do. How many do I don't know. Probably 50% or less. -- Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB) My server http://wesnewell.no-ip.com/cpu.php Verizon server http://mysite.verizon.net/res0exft/cpu.htm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need help for converting inline assembly to intrinsic functions AMD64 | [email protected] | Intel | 2 | March 29th 05 06:04 AM |
port 32-bit to AMD64 | [email protected] | Intel | 0 | March 18th 05 02:23 PM |
AMD64 heat ... caution | johns | Homebuilt PC's | 11 | February 3rd 05 11:22 AM |
AMD64 OS Development | Matt Strum | AMD x86-64 Processors | 9 | April 6th 04 10:57 PM |
AMD64 = IA-32e | Black Jack | General | 45 | February 29th 04 12:30 PM |