If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
P4PE upgrade ?
Why not boost the bus speed first? This board and these processors can
take a fair bit of boost and still be rock solid. You should definitely reach 3.0+ with your 2.53 cpu Yann wrote: Good day; Thinking of upgrading from a P4PE w/ P4-2.53 to a P4P800 w/ P4-3.0 C and new ram (DDR400) will i see a big difference ? Thanks ! Arthur |
#2
|
|||
|
|||
Yann wrote:
Good day; Thinking of upgrading from a P4PE w/ P4-2.53 to a P4P800 w/ P4-3.0 C and new ram (DDR400) will i see a big difference ? Thanks ! Arthur Do you have money to burn? Are you going to use the RAID setup? If not, OC the cpu by a few MHz and be happy. This would be a kickass web box, word unit, etc. But for games, maybe the other would be the way to go. What are your intentions for the system? You don't mention that fact. S |
#3
|
|||
|
|||
Since the P4PE will take the 800 mhz chips and use DDR400 to do it,why
change the board? The overclock on this will exceed the 3.0C. Maybe put the money towards???? sbb78247 wrote: Yann wrote: Good day; Thinking of upgrading from a P4PE w/ P4-2.53 to a P4P800 w/ P4-3.0 C and new ram (DDR400) will i see a big difference ? Thanks ! Arthur Do you have money to burn? Are you going to use the RAID setup? If not, OC the cpu by a few MHz and be happy. This would be a kickass web box, word unit, etc. But for games, maybe the other would be the way to go. What are your intentions for the system? You don't mention that fact. S |
#4
|
|||
|
|||
Mechanic wrote:
Since the P4PE will take the 800 mhz chips and use DDR400 to do it,why change the board? The overclock on this will exceed the 3.0C. Maybe put the money towards???? sbb78247 wrote: Yann wrote: Good day; Thinking of upgrading from a P4PE w/ P4-2.53 to a P4P800 w/ P4-3.0 C and new ram (DDR400) will i see a big difference ? Thanks ! Arthur Do you have money to burn? Are you going to use the RAID setup? If not, OC the cpu by a few MHz and be happy. This would be a kickass web box, word unit, etc. But for games, maybe the other would be the way to go. What are your intentions for the system? You don't mention that fact. S it will only accept one 512 module last time i checked, has this changed? 512 is really a minimum these days, so why limit yourself? |
#5
|
|||
|
|||
Do you have a good link for how to do the OC
Cooly "Mechanic" wrote in message . .. Why not boost the bus speed first? This board and these processors can take a fair bit of boost and still be rock solid. You should definitely reach 3.0+ with your 2.53 cpu Yann wrote: Good day; Thinking of upgrading from a P4PE w/ P4-2.53 to a P4P800 w/ P4-3.0 C and new ram (DDR400) will i see a big difference ? Thanks ! Arthur |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
P4PE 800mhz upgrade? | Gerry | Overclocking | 3 | January 3rd 05 10:30 AM |
P4PE upgrade | Howard Betel | Asus Motherboards | 4 | October 29th 04 03:40 AM |
Upgrade to p4p800 | Name | Asus Motherboards | 2 | November 8th 03 06:00 PM |
P4PE problem after BIOS upgrade | MiF | Asus Motherboards | 2 | September 20th 03 03:46 PM |
Upgrade advice needed... | Paul | Asus Motherboards | 0 | June 22nd 03 08:09 PM |