If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Scanning a problem after Installing XP.
My daughter has Color Page Pro II scanner and we downloaded for her the
latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments |
#2
|
|||
|
|||
On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus
des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm |
#3
|
|||
|
|||
Yes, that is where I downloaded the XP and win 2000 drivers.
"Shepİ" wrote in message ... On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm |
#4
|
|||
|
|||
"Shepİ" wrote in message ... On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? Most scanners have drivers separate from the TWAIN (or control) program. Make sure you've installed both. |
#5
|
|||
|
|||
On Tue, 6 Jan 2004 16:21:50 -0500 In this world we created "Karolus
des Reyches197" wrote : Yes, that is where I downloaded the XP and win 2000 drivers. Does the software have an option to change it's,"Source"? I've had to do this on a couple of scanners from within the scanner's software. "Shepİ" wrote in message .. . On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm |
#6
|
|||
|
|||
Can you be specific?
I do not un derstand as you ask it now. Thanks and I will respond. "Shepİ" wrote in message news On Tue, 6 Jan 2004 16:21:50 -0500 In this world we created "Karolus des Reyches197" wrote : Yes, that is where I downloaded the XP and win 2000 drivers. Does the software have an option to change it's,"Source"? I've had to do this on a couple of scanners from within the scanner's software. "Shepİ" wrote in message .. . On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm |
#7
|
|||
|
|||
we installed the drivers for XP for this scanner, no results.
Then the driver for Windows 2000 and they let us Preview and Scan within the Color Page Test SW, but nowhere else. THAT is the problem. "Noozer" wrote in message news:VeGKb.2495$ts4.1930@pd7tw3no... "Shepİ" wrote in message ... On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? Most scanners have drivers separate from the TWAIN (or control) program. Make sure you've installed both. |
#8
|
|||
|
|||
On Tue, 6 Jan 2004 23:36:54 -0500 In this world we created "Karolus
des Reyches197" wrote : Can you be specific? I do not un derstand as you ask it now. Thanks and I will respond. I meant is there ant software in your Programs group that requires setting up. Also this may help, http://www.scantips.com/scanlink.html "Shepİ" wrote in message news On Tue, 6 Jan 2004 16:21:50 -0500 In this world we created "Karolus des Reyches197" wrote : Yes, that is where I downloaded the XP and win 2000 drivers. Does the software have an option to change it's,"Source"? I've had to do this on a couple of scanners from within the scanner's software. "Shepİ" wrote in message .. . On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm |
#9
|
|||
|
|||
NO, all software is set up and installed.
"Shepİ" wrote in message ... On Tue, 6 Jan 2004 23:36:54 -0500 In this world we created "Karolus des Reyches197" wrote : Can you be specific? I do not un derstand as you ask it now. Thanks and I will respond. I meant is there ant software in your Programs group that requires setting up. Also this may help, http://www.scantips.com/scanlink.html "Shepİ" wrote in message news On Tue, 6 Jan 2004 16:21:50 -0500 In this world we created "Karolus des Reyches197" wrote : Yes, that is where I downloaded the XP and win 2000 drivers. Does the software have an option to change it's,"Source"? I've had to do this on a couple of scanners from within the scanner's software. "Shepİ" wrote in message .. . On Mon, 5 Jan 2004 21:15:38 -0500 In this world we created "Karolus des Reyches197" wrote : My daughter has Color Page Pro II scanner and we downloaded for her the latest XP driver and installed it. She is using Windows XP and up to date on all MS recommended updates. The taskbar at the bottom does show the scanner with its name, yet in Control Panel it shows nothing under scanner and under Imaging devices it shows her All-in-one Printer, Fax, Copier HP T14 series. Should that be deleted? Because under Printers it also shows the HP all-in-one Printer, Fax, Copier T14. Scanner is connected properly to the LPT1 port, set for EPP/ESP. Printer works through same cable. Color Page Pro II scanner has a Test Program and it does a preview fine and also a scan. But only in this program. When I go with her to a graphics program and want to Acquire, it does not scan. The scanner worked always fine under Windows98SE. Appreciate your comments Have you tried the scanner maker's support pages? -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm -- Free Windows/PC help, http://www.geocities.com/sheppola/trouble.html email shepATpartyheld.de Free songs download, http://www.soundclick.com/bands/8/nomessiahsmusic.htm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem installing Diamond AGP card | net | General | 17 | October 16th 03 12:17 AM |
AMD Problem | Sean | General | 9 | September 17th 03 01:20 AM |
Freezing, lock up, unresponsive problem. | James | General | 5 | September 5th 03 02:54 PM |
Startup/Shutdown Problem | Girgath | General | 5 | August 8th 03 05:45 AM |
Weird CD reading problem | Devang Devani | General | 1 | July 12th 03 03:09 AM |