A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » System Manufacturers & Vendors » Compaq Computers
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Compaq 6260 (AHA1522) SCSI not discovered on RH 9.0



 
 
Thread Tools Display Modes
  #1  
Old July 4th 03, 08:50 PM
Phil Gilmer
external usenet poster
 
Posts: n/a
Default Compaq 6260 (AHA1522) SCSI not discovered on RH 9.0

I want to add a SCSI adapter for tape backup unit on RH9.0 system. I
can't get the system to recognize the card. Booting with grub to a
pretty vanilla system. Haven't found any useful tidbits in the docs nor
have I found anything specific on the net.

I am currently running the same card on another system successfully.
Unfortunately it is a RH6.0 box and card was in the system at installation.

I hope someone in this group may have some ideas. I have posted in a
couple of the Linux groups and received no responses whatsoever.

Hints and tips appreciated.
--
Phil Gilmer
pgilmer@attglobalDOTnet
Replace "DOT" with "." to reply

  #2  
Old July 5th 03, 01:50 AM
Mike Calkins
external usenet poster
 
Posts: n/a
Default

Check the jumper settings.... Most likely set for BIOS off or EISA on. 1 &
6,describe the PC, and other boards.

BTW ,

Defaults were :

Switches 1 - 8 were all open, and J106 On, (installed)

Mike in Houston


"Phil Gilmer" pgilmer@attglobalDOTnet wrote in message
...
I want to add a SCSI adapter for tape backup unit on RH9.0 system. I
can't get the system to recognize the card. Booting with grub to a
pretty vanilla system. Haven't found any useful tidbits in the docs nor
have I found anything specific on the net.

I am currently running the same card on another system successfully.
Unfortunately it is a RH6.0 box and card was in the system at

installation.

I hope someone in this group may have some ideas. I have posted in a
couple of the Linux groups and received no responses whatsoever.

Hints and tips appreciated.
--
Phil Gilmer
pgilmer@attglobalDOTnet
Replace "DOT" with "." to reply



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
15K rpm SCSI-disk Ronny Mandal General 26 December 8th 04 09:04 PM
Newbie Question re hardware vs software RAID Gilgamesh General 44 November 22nd 04 11:52 PM
Booting problems with a A7v266-E and a Compaq 5304-128 SCSI RAID Controller Name Asus Motherboards 0 October 12th 04 05:29 PM
Compaq FAQ HH Compaq Computers 3 July 8th 03 05:14 AM
Compaq FAQ Updated HH Compaq Computers 0 June 29th 03 03:58 PM


All times are GMT +1. The time now is 04:49 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.