If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Bundled nero problem
I have just bought another recorder drive and want to keep my old one.
Both come with different versions of Nero 5.5 (old = 5.5.8.0 and new is 5.5.10.0) My problem is when I went to install the '10' version it told me to unistall the old and install the new, so thats what I've done. Now only the new drive is a valid recorder in the 'choose recorder box' Is there a way to get these working as I have the software for both versions that i got bundled with my drives Many thanks for help/assistance Stu |
#2
|
|||
|
|||
you have 2 different bundled versions of Nero. they will not install and run
together on the same system. Your best option is to get a retail version, then you will never have to worry about whether a new drive will be supported. Contact Ahead about getting a retail license for your version. "Stuart Palmer" wrote in message ... I have just bought another recorder drive and want to keep my old one. Both come with different versions of Nero 5.5 (old = 5.5.8.0 and new is 5.5.10.0) My problem is when I went to install the '10' version it told me to unistall the old and install the new, so thats what I've done. Now only the new drive is a valid recorder in the 'choose recorder box' Is there a way to get these working as I have the software for both versions that i got bundled with my drives Many thanks for help/assistance Stu |
#3
|
|||
|
|||
Stuart Palmer wrote:
I have just bought another recorder drive and want to keep my old one. Both come with different versions of Nero 5.5 (old = 5.5.8.0 and new is 5.5.10.0) My problem is when I went to install the '10' version it told me to unistall the old and install the new, so thats what I've done. Now only the new drive is a valid recorder in the 'choose recorder box' Is there a way to get these working as I have the software for both versions that i got bundled with my drives Many thanks for help/assistance Stu Near as I can tell, all flavors of nero are the same code. I had the same problem and solved it by loading the newest version and using the registration code from an old OEM version. Turned the new Express version to the full version with support for both drives. If you don't need to use 'em both at once, you might be able to just enter the reg code for the drive you want to use. Never tried that. If you have only bundled versions, you may have to reinstall and look into the registry to get the code. YMMV. mike -- Bunch of stuff For Sale and Wanted at the link below. Toshiba & Compaq LiIon Batteries, Test Equipment Honda CB-125S TEK Sampling Sweep Plugin and RM564 Tek 2465 $800, ham radio, 30pS pulser Tektronix Concept Books, spot welding head... http://www.geocities.com/SiliconValley/Monitor/4710/ |
#4
|
|||
|
|||
mike wrote:
Stuart Palmer wrote: I have just bought another recorder drive and want to keep my old one. Both come with different versions of Nero 5.5 (old = 5.5.8.0 and new is 5.5.10.0) My problem is when I went to install the '10' version it told me to unistall the old and install the new, so thats what I've done. Now only the new drive is a valid recorder in the 'choose recorder box' Is there a way to get these working as I have the software for both versions that i got bundled with my drives Many thanks for help/assistance Stu Near as I can tell, all flavors of nero are the same code. I had the same problem and solved it by loading the newest version and using the registration code from an old OEM version. Turned the new Express version to the full version with support for both drives. If you don't need to use 'em both at once, you might be able to just enter the reg code for the drive you want to use. Never tried that. If you have only bundled versions, you may have to reinstall and look into the registry to get the code. YMMV. mike The OEM version will only recognise the drive that you purchased it with but you can go to the Nero website & get a serial number that will unlock your software. You'll need your present serial number which is in a registry key H_KEY_CURRENT_USER\software\ahead\nero-burning rom\info It'll be a 24 digit number that you need to exchange for a new number that will unlock your software to work with all of your drives! Alternatively, upgrading to the retail version will also unlock the software! |
#5
|
|||
|
|||
On Thu, 18 Dec 2003 00:33:22 +0000, Tim Lister
wrote: mike wrote: Stuart Palmer wrote: I have just bought another recorder drive and want to keep my old one. Both come with different versions of Nero 5.5 (old = 5.5.8.0 and new is 5.5.10.0) My problem is when I went to install the '10' version it told me to unistall the old and install the new, so thats what I've done. Now only the new drive is a valid recorder in the 'choose recorder box' Is there a way to get these working as I have the software for both versions that i got bundled with my drives Many thanks for help/assistance Stu Near as I can tell, all flavors of nero are the same code. I had the same problem and solved it by loading the newest version and using the registration code from an old OEM version. Turned the new Express version to the full version with support for both drives. If you don't need to use 'em both at once, you might be able to just enter the reg code for the drive you want to use. Never tried that. If you have only bundled versions, you may have to reinstall and look into the registry to get the code. YMMV. mike The OEM version will only recognise the drive that you purchased it with but you can go to the Nero website & get a serial number that will unlock your software. You'll need your present serial number which is in a registry key H_KEY_CURRENT_USER\software\ahead\nero-burning rom\info It'll be a 24 digit number that you need to exchange for a new number that will unlock your software to work with all of your drives! Alternatively, upgrading to the retail version will also unlock the software! Could you advise where on the site this could be found. I poked around for a bit with no success. TIA DFB |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
This problem has baffled everyone... | Nick G | General | 46 | May 22nd 04 04:01 AM |
Troubles with Nero 5.5.6.4 and Multisession Cd | Roberto | General | 0 | November 1st 03 09:08 PM |
nero 6 problem | REDDEVIL | Cdr | 2 | October 5th 03 08:34 AM |
Problem making miniDVD in Nero 6 | Louise | Cdr | 1 | October 2nd 03 07:51 PM |
Nero 5 OEM > Nero 6 Full | Steve Zurlo | Cdr | 4 | August 1st 03 08:06 PM |