Sequential compilations - retrieve each data bundle?

Nero 7 does not supply the tool needed to access earlier burned files. In
Win XP, device manager, hardware, CD/DVD drive properties file shows
volumes, and offers to "populate". But it doesn't pop; gives only the most
recently burned
files. I don't know the correct terms to use in a google search.

With Win 98, or maybe it was with software with an earlier version of Nero,
it was easy to access any bunch of files.
Nero has not been very helpful in the past, so I ask here.
Suggestions for software to enable acces to all groups of files would be
much appreciated.
--
RobF
Address anti-spammed

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/gqnae

(No Mikey S-lickers have been able to prove ANY of the above )
(is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
'

RobF wrote:

Nero 7 does not supply the tool needed to access earlier burned files. In
Win XP, device manager, hardware, CD/DVD drive properties file shows
volumes, and offers to "populate". But it doesn't pop; gives only the most
recently burned
files. I don't know the correct terms to use in a google search.

With Win 98, or maybe it was with software with an earlier version of Nero,
it was easy to access any bunch of files.
Nero has not been very helpful in the past, so I ask here.
Suggestions for software to enable acces to all groups of files would be
much appreciated.

With Nero multimounter you can select any session and make it accessible
in Windows Explorer: Right-click a CD drive and choose Properties. Click
'Volumes' tab in the Properties window and then select the session you
want to access.

ftp://ftp9.nero.com/attach/
Multimounter_2K_XP.zip
(Be sure to read Readme.txt for install instruction.)

Another alternative is IsoBuster to view or extract the files in a
particular session.
http://www.isobuster.com/

"smh" wrote in message
...
|. --------------------------------------
| Mike Richter, were you born with
| "Scam Artist" emblazoned on your face?
| --------------------------------------
| http://tinyurl.com/gqnae
|
| (No Mikey S-lickers have been able to prove ANY of the above )
| (is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
| '
|
| RobF wrote:
|
| Nero 7 does not supply the tool needed to access earlier burned files.
In
| Win XP, device manager, hardware, CD/DVD drive properties file shows
| volumes, and offers to "populate". But it doesn't pop; gives only the
most
| recently burned
| files. I don't know the correct terms to use in a google search.
|
| With Win 98, or maybe it was with software with an earlier version of
Nero,
| it was easy to access any bunch of files.
| Nero has not been very helpful in the past, so I ask here.
| Suggestions for software to enable acces to all groups of files would be
| much appreciated.
|
| With Nero multimounter you can select any session and make it accessible
| in Windows Explorer: Right-click a CD drive and choose Properties. Click
| 'Volumes' tab in the Properties window and then select the session you
| want to access.
|
| ftp://ftp9.nero.com/attach/
| Multimounter_2K_XP.zip
| (Be sure to read Readme.txt for install instruction.)
|
| Another alternative is IsoBuster to view or extract the files in a
| particular session.
| http://www.isobuster.com/


Many thanks, smh. I'll install isobuster. The nero folder "neroCD2K.SYS" is
nowhere on my system. Am running Win XP Home, SP3, and Nero 7 SE, Home
essentials, bundled with the Memorex multi purpose drive. That, I guess. is
the reason for the absence of the folder and of course the *.inf file needed
to install the driver. Would you suppose that Nero could find a way to
install the required Nero driver and the CD2K.SYS folder? It takes a long
time to settle matters with Nero email help. You probably know about the
various versions and could save me much bother, in the likely event that
Nero is helpless in this situation.
Your posts here are always helpful, and I appreciate your time in
responding.
--
RobF
Address anti-spammed

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/gqnae

(No Mikey S-lickers have been able to prove ANY of the above )
(is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
'

RobF wrote:
"smh" wrote:
| RobF wrote:
|
| Nero 7 does not supply the tool needed to access earlier burned files. In
| Win XP, device manager, hardware, CD/DVD drive properties file shows
| volumes, and offers to "populate". But it doesn't pop; gives only the most
| recently burned files.

The "populate" gives a summary of volume - (logical) disc - information.

| I don't know the correct terms to use in a google search.

Multisession

|
| With Win 98, or maybe it was with software with an earlier version of Nero,
| it was easy to access any bunch of files.
|
| With Nero Multimounter you can select any session and make it accessible
| in Windows Explorer: Right-click a CD drive and choose Properties. Click
| 'Volumes' tab in the Properties window and then select the session you
| want to access.
|
| ftp://ftp9.nero.com/attach/
| Multimounter_2K_XP.zip
| (Be sure to read Readme.txt for install instruction.)
|
| Another alternative is IsoBuster to view or extract the files in a
| particular session.
| http://www.isobuster.com/

Many thanks, smh. I'll install isobuster. The nero folder "neroCD2K.SYS" is
nowhere on my system.

NeroCD2k.inf will do the copying:
Right-click NeroCD2k.inf and choose Install.

(The following assumes that you installed Nero in the default
directory.)

Copy NeroSHX.DLL, Multimounter.reg and readme.txt to:
C:\Program Files\ahead\Nero

Right-click readme.txt, select 'Open With' and select Notepad.
Right-click MultiMounter.reg, select 'Open With' and select Notepad.

In readme.txt/Notepad,

then replace [Nero Folder] with
C:\\Program Files\\ahead\\Nero

Highlight C:\\Program Files\\ahead\\Nero in the above and press
Control-C (for copy).

In Multimounter.reg/Notepad, highlight [NeroFolder] and press
Control-V (for paste).

@="[NeroFolder]\\neroshx.dll"

The line should then read:

@="C:\\Program Files\\ahead\\Nero\\neroshx.dll"

[File, Save] and exit Notepad. Double-click Multimounter.reg.

Right-click CD drive, Properties. Volumes tab will lists all the
sessions

Note: There might be bugs and that might be the reason Multimounter is
not readily available. Watch out for some problems, especially with
winxp/sp3 which I hear has some compatibility issues.

..
Am running Win XP Home, SP3, and Nero 7 SE, Home
essentials, bundled with the Memorex multi purpose drive. That, I guess. is
the reason for the absence of the folder and of course the *.inf file needed
to install the driver. Would you suppose that Nero could find a way to
install the required Nero driver and the CD2K.SYS folder? It takes a long
time to settle matters with Nero email help. You probably know about the
various versions and could save me much bother, in the likely event that
Nero is helpless in this situation.
Your posts here are always helpful, and I appreciate your time in
responding.

You are welcome.

TOP Posting may not be the preffered way here, so please see bottom of this
post.
* * * *

"smh" wrote in message
...
|. --------------------------------------
| Mike Richter, were you born with
| "Scam Artist" emblazoned on your face?
| --------------------------------------
| http://tinyurl.com/gqnae
|
| (No Mikey S-lickers have been able to prove ANY of the above )
| (is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
| '
|
| RobF wrote:
| "smh" wrote:
| | RobF wrote:
| |
| | Nero 7 does not supply the tool needed to access earlier burned
files. In
| | Win XP, device manager, hardware, CD/DVD drive properties file shows
| | volumes, and offers to "populate". But it doesn't pop; gives only
the most
| | recently burned files.
|
| The "populate" gives a summary of volume - (logical) disc - information.
|
| | I don't know the correct terms to use in a google search.
|
| Multisession
|
| |
| | With Win 98, or maybe it was with software with an earlier version
of Nero,
| | it was easy to access any bunch of files.
| |
| | With Nero Multimounter you can select any session and make it
accessible
| | in Windows Explorer: Right-click a CD drive and choose Properties.
Click
| | 'Volumes' tab in the Properties window and then select the session you
| | want to access.
| |
| | ftp://ftp9.nero.com/attach/
| | Multimounter_2K_XP.zip
| | (Be sure to read Readme.txt for install instruction.)
| |
| | Another alternative is IsoBuster to view or extract the files in a
| | particular session.
| | http://www.isobuster.com/
|
| Many thanks, smh. I'll install isobuster. The nero folder "neroCD2K.SYS"
is
| nowhere on my system.
|


| will do the copying:
| Right-click NeroCD2k.inf and choose Install.
|
| (The following assumes that you installed Nero in the default
| directory.)
|
| Copy NeroSHX.DLL, Multimounter.reg and readme.txt to:
| C:\Program Files\ahead\Nero
|
| Right-click readme.txt, select 'Open With' and select Notepad.
| Right-click MultiMounter.reg, select 'Open With' and select Notepad.
|
| In readme.txt/Notepad,
|
| then replace [Nero Folder] with
| C:\\Program Files\\ahead\\Nero
|
| Highlight C:\\Program Files\\ahead\\Nero in the above and press
| Control-C (for copy).
|
| In Multimounter.reg/Notepad, highlight [NeroFolder] and press
| Control-V (for paste).
|
| @="[NeroFolder]\\neroshx.dll"
|
| The line should then read:
|
| @="C:\\Program Files\\ahead\\Nero\\neroshx.dll"
|
| [File, Save] and exit Notepad. Double-click Multimounter.reg.
|
| Right-click CD drive, Properties. Volumes tab will lists all the
| sessions
|
| Note: There might be bugs and that might be the reason Multimounter is
| not readily available. Watch out for some problems, especially with
| winxp/sp3 which I hear has some compatibility issues.
|
| .
| Am running Win XP Home, SP3, and Nero 7 SE, Home
| essentials, bundled with the Memorex multi purpose drive. That, I guess.
is
| the reason for the absence of the folder and of course the *.inf file
needed
| to install the driver. Would you suppose that Nero could find a way to
| install the required Nero driver and the CD2K.SYS folder? It takes a
long
| time to settle matters with Nero email help. You probably know about the
| various versions and could save me much bother, in the likely event that
| Nero is helpless in this situation.
| Your posts here are always helpful, and I appreciate your time in
| responding.
|
| You are welcome.



Thanks again for your detailed reply. I still can't find the file
NeroCD2k.inf , or its folder. Probably a deficiency in the software, thus I
may need the non-SE, or regular Nero App.
The Isobuster you recommended works perfectly. There I see all my
compilations.
To my great surprise, Nero responded iimmediately, but the representative
doesn't seem to have noticed the question I raised about SE program's
possible omission of the needed *inf and other files.
I'll post again if it developes that Nero has a fix just for me.
Regards,

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/gqnae

(No Mikey S-lickers have been able to prove ANY of the above )
(is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
'

RobF wrote:
"smh" wrote:
| RobF wrote:

| | Nero 7 does not supply the tool needed to access earlier burned
| | files.
|
| | With Nero Multimounter you can select any session and make it accessible
| | in Windows Explorer: Right-click a CD drive and choose Properties. Click
| | 'Volumes' tab in the Properties window and then select the session you
| | want to access.
| |
| | ftp://ftp9.nero.com/attach/
| | Multimounter_2K_XP.zip
| | (Be sure to read Readme.txt for install instruction.)
| |
| | Another alternative is IsoBuster to view or extract the files in a
| | particular session.
| | http://www.isobuster.com/
|
| Many thanks, smh. I'll install isobuster. The nero folder "neroCD2K.SYS" is
| nowhere on my system.

| Right-click NeroCD2k.inf and choose Install.

That will "install" NeroCD2k.sys (and NeroCo.dll).

|.
| (The following assumes that you installed Nero in the default
| directory.)
|
| Copy NeroSHX.DLL, Multimounter.reg and readme.txt to:
| C:\Program Files\ahead\Nero
|
| then replace [Nero Folder] with
| C:\\Program Files\\ahead\\Nero
|
| The line should then read:
|
| @="C:\\Program Files\\ahead\\Nero\\neroshx.dll"
|
| Double-click Multimounter.reg.
|
| Note: There might be bugs and that might be the reason Multimounter is
| not readily available. Watch out for some problems, especially with
| winxp/sp3 which I hear has some compatibility issues.
|
| .
| Am running Win XP Home, SP3, and Nero 7 SE, Home
| essentials, bundled with the Memorex multi purpose drive. That, I guess. is
| the reason for the absence of the folder and of course the *.inf file needed
| to install the driver. Would you suppose that Nero could find a way to
| install the required Nero driver and the CD2K.SYS folder? It takes a long
| time to settle matters with Nero email help. You probably know about the
| various versions and could save me much bother, in the likely event that
| Nero is helpless in this situation.
| Your posts here are always helpful, and I appreciate your time in
| responding.
|
| You are welcome.

Thanks again for your detailed reply. I still can't find the file
NeroCD2k.inf , or its folder. Probably a deficiency in the software, thus I
may need the non-SE, or regular Nero App.
The Isobuster you recommended works perfectly. There I see all my
compilations.
To my great surprise, Nero responded iimmediately, but the representative
doesn't seem to have noticed the question I raised about SE program's
possible omission of the needed *inf and other files.
I'll post again if it developes that Nero has a fix just for me.

Multimounter_2k_xp.zip:

liesmich.txt
lisezmoi.txt
MultiMounter.reg

NeroCD2k.inf ===

NeroCd2k.sys
NeroCd2kUninstall.inf
NeroCo.dll
neroshx.dll
readme.txt

Recommend that you don't install Multimounter if IsoBuster gives what
you want.

Got it now, at long last, what was before my eyes, swimming with imagined
difficulties.
--
RobF
Address anti-spammed





"smh" wrote in message
...
|. --------------------------------------
| Mike Richter, were you born with
| "Scam Artist" emblazoned on your face?
| --------------------------------------
| http://tinyurl.com/gqnae
|
| (No Mikey S-lickers have been able to prove ANY of the above )
| (is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
| '
|
| RobF wrote:
| "smh" wrote:
| | RobF wrote:
|
| | | Nero 7 does not supply the tool needed to access earlier burned
| | | files.
| |
| | | With Nero Multimounter you can select any session and make it
accessible
| | | in Windows Explorer: Right-click a CD drive and choose Properties.
Click
| | | 'Volumes' tab in the Properties window and then select the session
you
| | | want to access.
| | |
| | | ftp://ftp9.nero.com/attach/
| | | Multimounter_2K_XP.zip
| | | (Be sure to read Readme.txt for install instruction.)
| | |
| | | Another alternative is IsoBuster to view or extract the files in a
| | | particular session.
| | | http://www.isobuster.com/
| |
| | Many thanks, smh. I'll install isobuster. The nero folder
"neroCD2K.SYS" is
| | nowhere on my system.
|
| | Right-click NeroCD2k.inf and choose Install.
|
| That will "install" NeroCD2k.sys (and NeroCo.dll).
|
| |.
| | (The following assumes that you installed Nero in the default
| | directory.)
| |
| | Copy NeroSHX.DLL, Multimounter.reg and readme.txt to:
| | C:\Program Files\ahead\Nero
| |
| | then replace [Nero Folder] with
| | C:\\Program Files\\ahead\\Nero
| |
| | The line should then read:
| |
| | @="C:\\Program Files\\ahead\\Nero\\neroshx.dll"
| |
| | Double-click Multimounter.reg.
| |
| | Note: There might be bugs and that might be the reason Multimounter is
| | not readily available. Watch out for some problems, especially with
| | winxp/sp3 which I hear has some compatibility issues.
| |
| | .
| | Am running Win XP Home, SP3, and Nero 7 SE, Home
| | essentials, bundled with the Memorex multi purpose drive. That, I
guess. is
| | the reason for the absence of the folder and of course the *.inf
file needed
| | to install the driver. Would you suppose that Nero could find a way
to
| | install the required Nero driver and the CD2K.SYS folder? It takes a
long
| | time to settle matters with Nero email help. You probably know about
the
| | various versions and could save me much bother, in the likely event
that
| | Nero is helpless in this situation.
| | Your posts here are always helpful, and I appreciate your time in
| | responding.
| |
| | You are welcome.
|
| Thanks again for your detailed reply. I still can't find the file
| NeroCD2k.inf , or its folder. Probably a deficiency in the software,
thus I
| may need the non-SE, or regular Nero App.
| The Isobuster you recommended works perfectly. There I see all my
| compilations.
| To my great surprise, Nero responded iimmediately, but the
representative
| doesn't seem to have noticed the question I raised about SE program's
| possible omission of the needed *inf and other files.
| I'll post again if it developes that Nero has a fix just for me.
|
| Multimounter_2k_xp.zip:
|
| liesmich.txt
| lisezmoi.txt
| MultiMounter.reg
|
| NeroCD2k.inf ===
|
| NeroCd2k.sys
| NeroCd2kUninstall.inf
| NeroCo.dll
| neroshx.dll
| readme.txt
|
| Recommend that you don't install Multimounter if IsoBuster gives what
| you want.

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/gqnae

(No Mikey S-lickers have been able to prove ANY of the above )
(is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
'

RobF wrote:

Got it now, at long last, what was before my eyes, swimming with imagined
difficulties.

I suspected as much. You were reading and yet it seemed you were not
reading. That's the reason for the detailed explanation. Hope you didn't
get offended.

But, as they say, all's well that ends well ?!

"smh" wrote in message
...
|. --------------------------------------
| Mike Richter, were you born with
| "Scam Artist" emblazoned on your face?
| --------------------------------------
| http://tinyurl.com/gqnae
|
| (No Mikey S-lickers have been able to prove ANY of the above )
| (is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
| '
|
| RobF wrote: filrfile ""
|
| Got it now, at long last, what was before my eyes, swimming with
imagined
| difficulties.
|
| I suspected as much. You were reading and yet it seemed you were not
| reading. That's the reason for the detailed explanation. Hope you didn't
| get offended.
|
| But, as they say, all's well that ends well ?!

All's well, no offence at all, grateful for details, useful info.

BTW, and sorry to continue, probably not necessary, but still don't have
the file "NeroCD2K.SYS" along with "NeroCD2K.inf " in the folder
"WINDOWS\SYSTEM32\DRIVERS ". The readme directs user to find them there.
Should I create a folder for them in Drivers, place the there from the
uzipped Multi file, and proceed from there?
--
RobF
Address anti-spammed

.. --------------------------------------
Mike Richter, were you born with
"Scam Artist" emblazoned on your face?
--------------------------------------
http://tinyurl.com/gqnae

(No Mikey S-lickers have been able to prove ANY of the above )
(is a LIBEL -- despite Mikey claimed to have PROOF of libels!)
'

RobF wrote:

still don't have
the file "NeroCD2K.SYS" along with "NeroCD2K.inf " in the folder
"WINDOWS\SYSTEM32\DRIVERS ". The readme directs user to find them there.
Should I create a folder for them in Drivers, place the there from the
uzipped Multi file, and proceed from there?

Unzip Multimounter_2k_xp.zip in a new directory, named like
"Multimounter_2k_xp". Go into that (unzipped) directory.

=== Right-click NeroCD2k.inf and click 'Install'. ===

The 'Install' will copy (and add some registry entries) the following
two files:

C:\WINDOWS\system32\NeroCo.dll
C:\WINDOWS\system32\drivers\NeroCd2k.sys

(The 'Install' does not copy NeroCD2k.inf.)