Epson R300 cd printing

got the CD printing working great for the R300 printer as far as it
goes but the templete in the printer has a large 4.5cm unprinted hole
in the middle of the CD whereas the printable CDs I am using have a
much larger printable area.

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)
-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...c-d549e513f0bf

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)

On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.

"Luke Curtis" wrote in message
...
got the CD printing working great for the R300 printer as far as it
goes but the templete in the printer has a large 4.5cm unprinted hole
in the middle of the CD whereas the printable CDs I am using have a
much larger printable area.

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)
-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...c-d549e513f0bf

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)

[snip]

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)

On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.


Not if you print direct from memory card.
--
disgust me. spams a lot in game
so I am posting as often as possible so
would start getting spammed eye for an eye. for good
luck, and

On Sun, 07 Oct 2007 03:47:28 GMT, "Marten" wrote:

On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.

I did not get any software with the printer and there is no specialist
CD printing software on the Epson site, just the card monitor and the
status monitor - what about the Nero CD software, would that work?




"Luke Curtis" wrote in message
.. .
got the CD printing working great for the R300 printer as far as it
goes but the templete in the printer has a large 4.5cm unprinted hole
in the middle of the CD whereas the printable CDs I am using have a
much larger printable area.

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)
-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...c-d549e513f0bf

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)


-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...c-d549e513f0bf

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)

Impmon wrote:
[snip]

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)

On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.


Not if you print direct from memory card.

Why would one ever print a CD from the memory card even if one could?

--
john mcwilliams

John McWilliams wrote in
:

Impmon wrote:
[snip]

is there a way to get the largable area? (I am using the card slot
to print direct from the printer)

On the left side of the CD Print program is a yellow CD. Click on in
to set the inner and outer ring dimentions.


Not if you print direct from memory card.

Why would one ever print a CD from the memory card even if one could?


To put a photo from a camera directly on a cd without dealing with a PC?

Seems like a pretty reasonable expectation to me, particularly if you
have one of those 'cd writer photo save' gadgets that transfers memory
card contents directly to a cd for archiving.

On Tue, 09 Oct 2007 10:08:52 -0700, John McWilliams
wrote:

Impmon wrote:
[snip]

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)

On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.


Not if you print direct from memory card.

Why would one ever print a CD from the memory card even if one could?

I bought the printer second hand off a boot sale - I did not get any
instructions or disks with it at all - and at £15 for the printer and
17 assorted sealed ink cartridges it is one of the best bargains I've
ever had!

-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...c-d549e513f0bf

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)

Luke Curtis wrote:
On Tue, 09 Oct 2007 10:08:52 -0700, John McWilliams
wrote:

Impmon wrote:
[snip]

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)
On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.

Not if you print direct from memory card.
Why would one ever print a CD from the memory card even if one could?

I bought the printer second hand off a boot sale - I did not get any
instructions or disks with it at all - and at £15 for the printer and
17 assorted sealed ink cartridges it is one of the best bargains I've
ever had!

If the cartridges are oem, maybe even if not, you got a fine deal- the
cartridges alone are worth it!

You should be able to find drivers for in on Epson's site, though maybe
not for the stand-alone CD design and print software.

--
john mcwilliams

On Oct 8, 2:14 pm, Luke Curtis wrote:
On Sun, 07 Oct 2007 03:47:28 GMT, "Marten" wrote:
On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.

I did not get any software with the printer and there is no specialist
CD printing software on the Epson site, just the card monitor and the
status monitor - what about the Nero CD software, would that work?





"Luke Curtis" wrote in message
.. .
got the CD printing working great for the R300 printer as far as it
goes but the templete in the printer has a large 4.5cm unprinted hole
in the middle of the CD whereas the printable CDs I am using have a
much larger printable area.

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)
-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...7-4192-91cc-d5...

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)

-

Got unwanted CDs, DVDs & Games?http://www.swapshop.co.uk/default.as...7-4192-91cc-d5...

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)- Hide quoted text -

- Show quoted text -

For Epson printers, you need their PrintCD software. The same
software works on Epson R200 series printers for sure, the R200, R220
and R260. I have had those three printers. The cover labels you make
using the Epson PrintCD software only work with Epson printer
drivers. That explains why discontinued Epson R220 printers fetch
such high prices on ebay - the R220s accept generic ink cartridges and
print faster and with less noise than the R260, now also
discontinued. For someone with a lot of CD and DVD covers created in
the proprietary Epson format, it is tough to see all that work lost.

On Thu, 11 Oct 2007 23:56:25 -0700, gerry wrote:

On Oct 8, 2:14 pm, Luke Curtis wrote:
On Sun, 07 Oct 2007 03:47:28 GMT, "Marten" wrote:
On the left side of the CD Print program is a yellow CD. Click on in to set
the inner and outer ring dimentions.

I did not get any software with the printer and there is no specialist
CD printing software on the Epson site, just the card monitor and the
status monitor - what about the Nero CD software, would that work?





"Luke Curtis" wrote in message
.. .
got the CD printing working great for the R300 printer as far as it
goes but the templete in the printer has a large 4.5cm unprinted hole
in the middle of the CD whereas the printable CDs I am using have a
much larger printable area.

is there a way to get the largable area? (I am using the card slot to
print direct from the printer)
-

Got unwanted CDs, DVDs & Games?
http://www.swapshop.co.uk/default.as...7-4192-91cc-d5...

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)

-

Got unwanted CDs, DVDs & Games?http://www.swapshop.co.uk/default.as...7-4192-91cc-d5...

--
ButIstillneedtoknowwhat'sinthere! Thekeytoanysecurity
systemishowit'sdesigned! Thatdependsonwhyitwasdesigned!
Ihavetoknowwhatwhoeverdesigneditwastryingtoprotect !
(Blakes 7, City on the Edge of the World - Vila in typical panic mode)- Hide quoted text -

- Show quoted text -

For Epson printers, you need their PrintCD software. The same
software works on Epson R200 series printers for sure, the R200, R220
and R260.

R320 too!

Jethro


I have had those three printers. The cover labels you make
using the Epson PrintCD software only work with Epson printer
drivers. That explains why discontinued Epson R220 printers fetch
such high prices on ebay - the R220s accept generic ink cartridges and
print faster and with less noise than the R260, now also
discontinued. For someone with a lot of CD and DVD covers created in
the proprietary Epson format, it is tough to see all that work lost.