If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Corsair magnetic levitation fans (maglev fans)
Hello,
I find this a very interesting product: http://www.tomshardware.com/news/cor...gpu,31977.html It claims that it's fans "levitate". Does this mean it no longer requires any oil and thus no more cleaning because of dust+oil+black smoke stuff frictions ? I consider this a major breakthrough, now PCs won't require any more oil to function. Perhaps oil to produce them, but after that, no more oil needed LOL. Such a re-assurance ! Really it's very nice to know. In case the oil runs out some day ! LOL. Bye, Skybuck. |
#2
|
|||
|
|||
Corsair magnetic levitation fans (maglev fans)
Skybuck Flying wrote:
Hello, I find this a very interesting product: http://www.tomshardware.com/news/cor...gpu,31977.html It claims that it's fans "levitate". Does this mean it no longer requires any oil and thus no more cleaning because of dust+oil+black smoke stuff frictions ? I consider this a major breakthrough, now PCs won't require any more oil to function. Perhaps oil to produce them, but after that, no more oil needed LOL. Such a re-assurance ! Really it's very nice to know. In case the oil runs out some day ! LOL. Bye, Skybuck. The OEM is likely to be Sunon. See page 3. The design relies on magnetic attraction. There is still a bearing. http://www.sunon.com/tw/products/pdf/maglev.pdf Now if you look at this diagram and page, you'll see that the claims are slightly different. The fan actually has more conventional elements to it. The fan is not quite as magical as it looks in the Sunon PDF. http://www.comet.bg/files/custom/MagLev_scheme.jpg ( http://www.comet.bg/?cid=105&NewsId=961 ) "Prevents dust penetration, increases lubrication circulation" From another web page "The unique feature of SUNON's MagLev motor fan is that the path of the flan blades during operation is magnetically controlled by Sunon's patented MagLev System. The result is that the shaft and bearing have no direct contact during operation and so experience no friction no matter how the fan is oriented. This means that the characteristic abrasion noises of worn-out components are not produced and also allows a service life of 50,000 hours or even longer at room temperature. " Some fans at work had a service life of 25000 hours. We would tell customers to do a preventative replacement of the fans in the product, every three years of 24 hour per day system operation (the fans could be replaced with the power still on). These Sunon fans would be good for six years, if you believe the advertising material. The device is not a fluid dynamic bearing, and isn't sealed on the ends. It just has dust caps. Your guess is as good as mine, as to what the lubrication circulation pattern looks like. The Panaflo fans, used a sealed bearing with a trade name of "hydro wave". Which I believe is a fluid dynamic bearing. Rather than a dust cap, that's an attempt at a sealed bearing. While I don't have a datasheet (and Panaflo was bought by NMB), a quick Google lists some of those fans as having a 50000 hour service life. So if I held two fans in my hand, a Panaflo and a Sunon Maglev, which would you buy ? :-) Which has the least flaky explanation for how it works ? You decide. The Sunon looks like it has a pretty conventional bearing. And when real world considerations are taken into account, the bearing will not be exactly frictionless. It will be "close to" frictionless. HTH, Paul |
#3
|
|||
|
|||
Corsair magnetic levitation fans (maglev fans)
On Mon, 20 Jun 2016 06:43:22 +0200, Skybuck Flying wrote:
Hello, I find this a very interesting product: http://www.tomshardware.com/news/cor...vitation-fans- gpu,31977.html It claims that it's fans "levitate". Does this mean it no longer requires any oil and thus no more cleaning because of dust+oil+black smoke stuff frictions ? I consider this a major breakthrough, now PCs won't require any more oil to function. Perhaps oil to produce them, but after that, no more oil needed LOL. Such a re-assurance ! Really it's very nice to know. In case the oil runs out some day ! LOL. I've been designing Sunon maglev fans into rackmount comms products for years. I could check with production here, but off the top of my head, I don't think we've had a single field failure (vs a lot of field failures for the cheap sleeve bearing fans that we used in earlier designs). Caveat: Until the fans "fly" they are just like crappier-than-normal sleeve bearings. Expect lots of wear below a minimum RPM (that I don't think is specified in the datasheet, although they may specify a minimum voltage or PWM duty cycle). Start and stop cycles will also cause wear. So be careful about your thermal management software - you might need to disable some of the software features that slow the fans right down or turn them on and off cyclically. Those are features you want for a sleeve or ball bearing fan, but not for a maglev fan. Regards, Allan |
#4
|
|||
|
|||
Corsair magnetic levitation fans (maglev fans)
On 20/06/2016 8:13 PM, Allan Herriman wrote:
Caveat: Until the fans "fly" they are just like crappier-than-normal sleeve bearings. Expect lots of wear below a minimum RPM (that I don't think is specified in the datasheet, although they may specify a minimum voltage or PWM duty cycle). Start and stop cycles will also cause wear. How do you guarantee it to spin at maximum speed? -- @~@ Remain silent. Drink, Blink, Stretch! Live long and prosper! / v \ Simplicity is Beauty! May the Force and farces be with you! /( _ )\ (Fedora release 23) Linux 4.5.7-200.fc23.x86_64 ^ ^ 21:06:01 up 2:19 0 users load average: 1.06 1.08 1.05 不借貸! 不詐騙! 不援交! 不打交! 不打劫! 不自殺! 請考慮綜援 (CSSA): http://www.swd.gov.hk/tc/index/site_...sub_addressesa |
#5
|
|||
|
|||
Corsair magnetic levitation fans (maglev fans)
On Mon, 20 Jun 2016 21:16:48 +0800, Mr. Man-wai Chang wrote:
On 20/06/2016 8:13 PM, Allan Herriman wrote: Caveat: Until the fans "fly" they are just like crappier-than-normal sleeve bearings. Expect lots of wear below a minimum RPM (that I don't think is specified in the datasheet, although they may specify a minimum voltage or PWM duty cycle). Start and stop cycles will also cause wear. How do you guarantee it to spin at maximum speed? Do not reduce the PWM below the recommended minimum. Or do not reduce the voltage below the recommended minimum. The fan that the OP linked actually specifies an RPM range (400 - 2400), so it would be acceptable to reduce the PWM duty cycle as long as the speed is above 400RPM. Regards, Allan |
#6
|
|||
|
|||
Corsair magnetic levitation fans (maglev fans)
Skybuck Flying wrote:
Hello, I find this a very interesting product: http://www.tomshardware.com/news/cor...gpu,31977.html It claims that it's fans "levitate". * NOT true; use your eyes and whatever brain you got, and re-READ carefully for comprehension. It is a magnetic bearing,nothing new, been around for a long time. Stronger magnetic field, so better physical isolation. Does this mean it no longer requires any oil and thus no more cleaning because of dust+oil+black smoke stuff frictions ? I consider this a major breakthrough, now PCs won't require any more oil to function. Perhaps oil to produce them, but after that, no more oil needed LOL. Such a re-assurance ! Really it's very nice to know. In case the oil runs out some day ! LOL. Bye, Skybuck. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fans: who makes reliable, quiet fans with decent CFM flow? | Ken[_8_] | Homebuilt PC's | 10 | May 2nd 08 09:55 PM |
PSU, both fans died.. just replace fans or the whole unit? | markm75 | Homebuilt PC's | 3 | February 21st 08 09:19 AM |
Power On, Green, Fans Start, Fans Stop, Flash Red | ...Mike | Compaq Computers | 1 | July 11th 04 12:38 PM |
the fans, the fans! | Andrew Z Carpenter | Homebuilt PC's | 10 | September 4th 03 07:53 PM |
Vantec Aerotech fans for Case fans think this is ok ??> | We Live For The One We Die For The One | Homebuilt PC's | 0 | August 22nd 03 12:12 PM |