A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Cdr
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

how to tell if an external DVD drive SATA or IDE?



 
 
Thread Tools Display Modes
  #1  
Old January 12th 11, 12:50 PM posted to alt.comp.periphs.cdr
cpliu
external usenet poster
 
Posts: 49
Default how to tell if an external DVD drive SATA or IDE?

I have a Philips spd3600cc that I'd like to find out if it's SATA. I
can't from its properties. So can I find out that information?

Thanks,
  #2  
Old January 12th 11, 09:48 PM posted to alt.comp.periphs.cdr
Mike S.
external usenet poster
 
Posts: 149
Default how to tell if an external DVD drive SATA or IDE?


In article ,
cpliu wrote:
I have a Philips spd3600cc that I'd like to find out if it's SATA. I
can't from its properties. So can I find out that information?

Thanks,


This is a rebadged Lite-On drive. AFAIK the external Lite-On drives of
that vintage were all IDE mechanisms.

How does the drive identify itself (model number and firmware rev) to your
burning software?


  #3  
Old January 13th 11, 01:16 AM posted to alt.comp.periphs.cdr
Monty[_3_]
external usenet poster
 
Posts: 21
Default how to tell if an external DVD drive SATA or IDE?

On Wed, 12 Jan 2011 04:50:03 -0800 (PST), cpliu
wrote:

I have a Philips spd3600cc that I'd like to find out if it's SATA. I
can't from its properties. So can I find out that information?


Hi,

You might try SIW (System Information for Windows). You can get it at
www.gtopala.com

After installation, drill down to the Hardware section and then select
Storage Devices
  #4  
Old January 16th 11, 04:01 PM posted to alt.comp.periphs.cdr
cpliu
external usenet poster
 
Posts: 49
Default how to tell if an external DVD drive SATA or IDE?

Thank you all for the help. It's IDE as Mike indicated.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Using IDE hard drive with SATA DVD Drive Jason[_8_] Homebuilt PC's 6 May 16th 09 09:20 PM
recommend Firewire external hard drive case 3.5" IDE and SATA || General 1 March 17th 07 07:00 AM
SATA hard disk & 2 DVD drives - separate IDE connectors for DVD's? [email protected] Storage (alternative) 1 January 9th 06 09:05 AM
Internal SATA & External IDE Connected as SATA to P4PE [email protected] Asus Motherboards 3 August 14th 05 01:44 AM
A7N8X-E Deluxe - SATA for HDDs + IDE for DVD-ROM & DVD-RW Richard Harrison Asus Motherboards 7 July 6th 04 04:31 AM


All times are GMT +1. The time now is 02:32 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.