A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Does a Firewire 800 PCI card make sense in a 32-bit PCI slot?



 
 
Thread Tools Display Modes
  #1  
Old September 10th 03, 09:12 AM
@drian
external usenet poster
 
Posts: n/a
Default Does a Firewire 800 PCI card make sense in a 32-bit PCI slot?

The subject says it all. I'm under the impression that Firewire 800 only
works at full speed in a 64-bit slot. If I'm right and it's used in a
32-bit slot, what's the point paying the extra money for a speed you'll
never achieve in a 32-bit slot?

I'm looking at this link:

http://www.subrosasoft.com/thestore/...roducts_id=399

@drian.


  #2  
Old September 10th 03, 11:09 AM
proxima
external usenet poster
 
Posts: n/a
Default

Get a Dell Precision 650. PCIx 64-bit slot rocks..




"@drian" wrote in message
...
The subject says it all. I'm under the impression that Firewire 800 only
works at full speed in a 64-bit slot. If I'm right and it's used in a
32-bit slot, what's the point paying the extra money for a speed you'll
never achieve in a 32-bit slot?

I'm looking at this link:

http://www.subrosasoft.com/thestore/...roducts_id=399

@drian.




  #3  
Old September 10th 03, 03:04 PM
Mike Walsh
external usenet poster
 
Posts: n/a
Default


The page says the board runs at 33 Mhz, but the system requirements call for a 66 Mhz PCI slot. Does that make any sense? In any case a standard 32 bit 33 Mhz slot should be fast enough (just barely) for 800 Mbits/sec. If it runs at only 400 Mbits/sec it is because the designers of the card arbitrarily decided to limit the speed.


"@drian" wrote:

The subject says it all. I'm under the impression that Firewire 800 only
works at full speed in a 64-bit slot. If I'm right and it's used in a
32-bit slot, what's the point paying the extra money for a speed you'll
never achieve in a 32-bit slot?

I'm looking at this link:

http://www.subrosasoft.com/thestore/...roducts_id=399

@drian.


--
Mike Walsh
West Palm Beach, Florida, U.S.A.
  #4  
Old September 10th 03, 11:58 PM
@drian
external usenet poster
 
Posts: n/a
Default

"Mike Walsh" wrote in message
...

The page says the board runs at 33 Mhz, but the system requirements call

for a 66 Mhz PCI slot. Does that make any sense? In any case a standard 32
bit 33 Mhz slot should be fast enough (just barely) for 800 Mbits/sec. If it
runs at only 400 Mbits/sec it is because the designers of the card
arbitrarily decided to limit the speed.

---

Yes, confusing, eh? I'm undecided on this. It may be a good idea to save
some money and go for a regular Firewire 400Mbps card.

@drian.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Firewire Harddisk Problems on Clevo Notebook and WIndows XP RayM General 2 September 21st 03 05:48 AM
What specs to look for in a video card to run 22" monitor at high resolutions Steve Rossiter General 7 September 7th 03 05:20 AM
USB 1.1 card for old Laptop and W95? Cari General 0 August 11th 03 06:49 PM
Replacing AGP card prevents boot Vanguard General 0 August 10th 03 01:52 AM
PCI Firewire card? john.ciavarello General 4 July 1st 03 10:51 PM


All times are GMT +1. The time now is 01:09 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 HardwareBanter.
The comments are property of their posters.