A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » General
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Why mechanical failure causes HDD being undetectable by bios or OS ?



 
 
Thread Tools Display Modes
  #1  
Old September 3rd 04, 04:02 AM
andy
external usenet poster
 
Posts: n/a
Default Why mechanical failure causes HDD being undetectable by bios or OS ?

Hi!
Could someone please explain why in the case of *mechanical* failure HD
becomes sometimes undetected by BIOS and/or the operating system (e.g. win xp
or linux)?
If it was an electronic failure then such behaviour would be obious, but why
the same happens with some mechanical failures? When electronics is working in
my opinion it still should be detected by bios and/or the system (win xp or
linux), but often it is not.
I could recover about 80% of the data from my HDD (which apparently has a
mechanical failure - plates spin up and down, heads create bad noises) if only
the disk could be seen by the system all the time. But often during copying of
the data heads hit with a loud sound so badly that sometimes even the plates
stop rotating, and the disk then dissapears from the system. It is then very
difficult to make it detectable by the system again, sometimes the sytem can
detect it but only after several minutes of copying it freezes and then
dissapears again.
Recently, I was unlucky, and even after several dozens of retries it's still
undetectable by the system.

Could you please advice what to do to make the disk detectable by the system
all the time?
What causes that it is not detectable although the failure is in mechanics not
electronics?

BTW, if someone has the same disk model (Quantum Fireball ST64A011), please
let me know.

andy

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why mechanical failure causes HDD being undetectable by bios or OS ? andy General 32 September 8th 04 09:01 PM
P4P800 acting flakey bios checksum failure Stacey General 6 March 7th 04 04:35 PM
Harddrive Failure Gerry Abbott General 3 November 28th 03 01:41 AM
Failure curve of hard drives Lurch General 4 October 24th 03 04:44 PM
Laptop HDD: failure during enumeration? rcm General 0 July 25th 03 05:06 PM


All times are GMT +1. The time now is 10:20 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 HardwareBanter.
The comments are property of their posters.