|If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.|
||Thread Tools||Display Modes|
Directx Problem Solved
Good to hear that you've fixed the problem.
And such a simply remedy in the end too.
"Dudley Henriques" wrote in message
I would like to post this after some of you went to a lot of trouble to
me with a problem in directx dxdiag. It isn't often I get a chance to help
someone else, and it's a pleasure for me to be able to post what was the
final solution to the issue. I sincerely hope it helps someone else.
Problem was in dxdiag not passing the display tests in 3D and direct draw.
This was a problem in several versions of directx, several video drivers,
and several different cards.
Thanks to several people on this group taking their time to post to me on
his issue, I was able to isolate at least partially what was happening.
After moving the video card out of PCI slot 1 into another slot and
isolating a single IRQ to the video card, things started to improve, but
tests still were failing in dxdiag. I finally found the problem and the
solution tonight. It was the REFRESH RATE on the monitor, a Dell P991.
had told me a year and a half ago to put the refresh rate at 100, which I
did. On a web search tonight, I just happened on a post from someone who
solved a similar problem by reducing the refresh rate on the monitor to
which I understand is a normal setting anyway. I reduced it to 75 and the
issue was solved instantly.
All the tests now pass again and again with no problems. So if any of you
folks have a problem in dxdiag with the tests not passing, try looking at
the refresh rate on your monitor.
I would like to thank this group for being here when I needed you, and I
sincerely hope this solution helps someone out there who might need a
helping hand just like I did.
International Fighter Pilots Fellowship
|Thread||Thread Starter||Forum||Replies||Last Post|
|RAM problem solved!||JM||Asus Motherboards||8||January 17th 05 01:27 PM|
|Hawkeye - Thanks for the advice -problem solved||bubble head||Ati Videocards||0||January 11th 05 04:28 AM|
|GA7N400 Pro (not Pro2) problem - advice requested||Eddie B.||Gigabyte Motherboards||4||January 8th 05 02:17 PM|
|3Dmark05 & Radeon 9800 Pro: DirectX Problem||nSurfer Tom||Ati Videocards||7||October 3rd 04 01:54 PM|
|Mouse Problem||Jeff||Homebuilt PC's||0||October 1st 04 06:44 AM|