If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Windows XP Pro Install Problem
Using Windows XP Pro Upgrade (original CD), I get the following error
after the first boot during installation to a clean drive. I've cleaned the original disk (like it suggested). What else can I do? SYS.DLL: Syntax error in manifest or policy file "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. Installation Failed E:\I386\asms. Error message: Data error (cyclic redundancy check) My machine is a: Dell Dimension XPS R450 384 MB RAM 12 GB Maxtor Quasar hard dive Intel 440BX AGPset Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
#3
|
|||
|
|||
That is not the error I'm receiving.
But since I had nothing to lose, I tried the steps recommended on that page. The drive is formatted NTFS. Regedit.exe is not installed yet. I used REG.EXE from command line. The key mentioned did not exist, but the closest thing was: 4D36E967-E325-11CE-BFC1-08002BE10318 And only then did "UpperFilters" exist. So I deleted it. Rebooted and the original problem still exists. What should I try next? "Carey Frisch [MVP]" wrote: "The File 'Asms' on Windows XP Professional CD-ROM Is Needed" Error Message When You Install Windows XP http://support.microsoft.com/default...&Product=winxp -- Carey Frisch Microsoft MVP Windows XP - Shell/User Be Smart! Protect your PC! http://www.microsoft.com/security/protect/ ------------------------------------------------------------------------------------------------------------ "O.B." wrote in message: ... | Using Windows XP Pro Upgrade (original CD), I get the following error | after the first boot during installation to a clean drive. I've cleaned | the original disk (like it suggested). What else can I do? | | SYS.DLL: Syntax error in manifest or policy file | "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. | | Installation Failed E:\I386\asms. | Error message: Data error (cyclic redundancy check) | | My machine is a: | Dell Dimension XPS R450 | 384 MB RAM | 12 GB Maxtor Quasar hard dive | Intel 440BX AGPset | Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
#4
|
|||
|
|||
can you copy the disk?
"O.B." wrote in message ... Using Windows XP Pro Upgrade (original CD), I get the following error after the first boot during installation to a clean drive. I've cleaned the original disk (like it suggested). What else can I do? SYS.DLL: Syntax error in manifest or policy file "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. Installation Failed E:\I386\asms. Error message: Data error (cyclic redundancy check) My machine is a: Dell Dimension XPS R450 384 MB RAM 12 GB Maxtor Quasar hard dive Intel 440BX AGPset Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
#5
|
|||
|
|||
I have had that error when either the CD is duff, and once or twice when
then CD-ROM is on it's way out. Perhaps try copying the contents of the cd to a directory on the hard drive? Or make a backup of the CD and try that? "O.B." wrote in message ... Using Windows XP Pro Upgrade (original CD), I get the following error after the first boot during installation to a clean drive. I've cleaned the original disk (like it suggested). What else can I do? SYS.DLL: Syntax error in manifest or policy file "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. Installation Failed E:\I386\asms. Error message: Data error (cyclic redundancy check) My machine is a: Dell Dimension XPS R450 384 MB RAM 12 GB Maxtor Quasar hard dive Intel 440BX AGPset Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
#6
|
|||
|
|||
Sure enough. The CD is bad. I tried the CD in another computer and it
failed to copy the same file to the local drive. I just bought the CD! How frustrating. Can someone please zip up the files located in the following directories and email them to me? CD_DRIVE\I386\ASMS\6000\MSFT\WINDOWS\COMMON\CONTRO LS CD_DRIVE\I386\ASMS\60100\MSFT\WINDOWS\COMMON\CONTR OLS Thanks in advance, OB Andy wrote: I have had that error when either the CD is duff, and once or twice when then CD-ROM is on it's way out. Perhaps try copying the contents of the cd to a directory on the hard drive? Or make a backup of the CD and try that? "O.B." wrote in message ... Using Windows XP Pro Upgrade (original CD), I get the following error after the first boot during installation to a clean drive. I've cleaned the original disk (like it suggested). What else can I do? SYS.DLL: Syntax error in manifest or policy file "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. Installation Failed E:\I386\asms. Error message: Data error (cyclic redundancy check) My machine is a: Dell Dimension XPS R450 384 MB RAM 12 GB Maxtor Quasar hard dive Intel 440BX AGPset Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
#7
|
|||
|
|||
If your Addy is good check your inbox for what Santa delivered to you
tonight Glenn "O.B." wrote in message ... Sure enough. The CD is bad. I tried the CD in another computer and it failed to copy the same file to the local drive. I just bought the CD! How frustrating. Can someone please zip up the files located in the following directories and email them to me? CD_DRIVE\I386\ASMS\6000\MSFT\WINDOWS\COMMON\CONTRO LS CD_DRIVE\I386\ASMS\60100\MSFT\WINDOWS\COMMON\CONTR OLS Thanks in advance, OB Andy wrote: I have had that error when either the CD is duff, and once or twice when then CD-ROM is on it's way out. Perhaps try copying the contents of the cd to a directory on the hard drive? Or make a backup of the CD and try that? "O.B." wrote in message ... Using Windows XP Pro Upgrade (original CD), I get the following error after the first boot during installation to a clean drive. I've cleaned the original disk (like it suggested). What else can I do? SYS.DLL: Syntax error in manifest or policy file "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. Installation Failed E:\I386\asms. Error message: Data error (cyclic redundancy check) My machine is a: Dell Dimension XPS R450 384 MB RAM 12 GB Maxtor Quasar hard dive Intel 440BX AGPset Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
#8
|
|||
|
|||
You should also call Microsoft, if the store where you bough it won't
replace it, and tell them the CD is bad. They will more than likely replace it. You will probably need it again, so you might as well spend the time now to get what you paid for. "O.B." wrote in message ... Sure enough. The CD is bad. I tried the CD in another computer and it failed to copy the same file to the local drive. I just bought the CD! How frustrating. Can someone please zip up the files located in the following directories and email them to me? CD_DRIVE\I386\ASMS\6000\MSFT\WINDOWS\COMMON\CONTRO LS CD_DRIVE\I386\ASMS\60100\MSFT\WINDOWS\COMMON\CONTR OLS Thanks in advance, OB Andy wrote: I have had that error when either the CD is duff, and once or twice when then CD-ROM is on it's way out. Perhaps try copying the contents of the cd to a directory on the hard drive? Or make a backup of the CD and try that? "O.B." wrote in message ... Using Windows XP Pro Upgrade (original CD), I get the following error after the first boot during installation to a clean drive. I've cleaned the original disk (like it suggested). What else can I do? SYS.DLL: Syntax error in manifest or policy file "E:\I386\asms\6000\MSFT\Windows\COMMON\CONTROLS\CO NTROLS.MAN" on line 4. Installation Failed E:\I386\asms. Error message: Data error (cyclic redundancy check) My machine is a: Dell Dimension XPS R450 384 MB RAM 12 GB Maxtor Quasar hard dive Intel 440BX AGPset Pheonix BIOS 4.0 Release 6.0: 4S4EBOX1.10A.0035.P13 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Windows XP install woes - solved | Paul D.Smith | Compaq Computers | 0 | February 10th 05 09:05 AM |
Problem with freezing mouse, Windows Explorer | Jon Davis | General | 3 | April 3rd 04 04:06 AM |
Please help problem to install xp ! | henny | Gigabyte Motherboards | 2 | December 25th 03 12:05 PM |
DAW & Windows XP RAID Tips, ProTools error -9086 | Giganews | Asus Motherboards | 0 | October 24th 03 06:45 AM |
Install SB16 or Live Value in FIC VA-503+ with Windows | Woody | General | 2 | July 10th 03 08:28 AM |