If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
HP Color Laser Jet 1600 red cartridge problem
Tony;1221174 Wrote: HannaK wrote: TONY you are a STAR!!!! My son fixed it according your papers. It works better then a new one!!! I really thank you again for your help and wish you all the best Hanna I am delighted that it worked. Congratulations to your son, the procedure is a little tricky but he is clearly careful and methodical. Interestingly this procedure does not appear in the HP manuals but was developed by a very helpful man named Don Thompson. The link was of course provided by someone other than me. Thank you. Tony I also had the same problem but on completion of the cleaning and after careful re-assembly I get the message Door Open and I cannot print anything can you suggest anything? 06-13-2010 09:55 AM |
#12
|
|||
|
|||
HP Color Laser Jet 1600 red cartridge problem
On 27/11/2011 3:15 AM, billtreas wrote:
Tony;1220034 Wrote: wrote: Thanks Tony so much for your replay! This mail is ok. I believe that this is the problem but it started with a new cartridge. Anyway- I will be glad to receive your instructions It might work - if not I have to buy anyway a new one but it won't be HP any more Hanna Hanna The link that the other responder supplied is the same document that I have so there is no need to send it to you. Best of luck Tony I also had the same problem but on completion of the cleaning and after careful re-assembly I get the message Door Open and I cannot print anything can you suggest anything? Just picked up on this thread as I have this same engine in my HP. Could some one please post the article please as its not available on any of the news groups. Thanks |
#13
|
|||
|
|||
HP Color Laser Jet 1600
On Wednesday, June 2, 2010 at 2:04:24 AM UTC-5, Tony wrote:
HannaK wrote: Anybody? Any suggestion? Hanna This is not a cartridge problem since one of your cartridges works OK in another printer. There is an issue with this printer and some others that are similar with dust getting on to the laser lenses, this appears to affect magenta (red) first because the magenta lense is at the bottom of the laser array. The problem is that the laser assembly needs to be removed so that the lenses can be cleaned with compressed air or dry cotton swabs. This is a complicated job and takes quite some time. I cannot be sure this problem is what you are experiencing but I think it is. There is an instruction for doing this work. Is your e-mail address valid, if so I will send the instruction to you but whoever does the work will need to be technically skilled to remove the laser assembly from the printer. Tony Tony, I work for a school and they have the link block on how to fix the red printing problem. Can you please send me the PDF file to my school email? thank you so much |
#15
|
|||
|
|||
HP Color Laser Jet 1600
none wrote:
On 09/06/2017 10:16, wrote: On Wednesday, June 2, 2010 at 2:04:24 AM UTC-5, Tony wrote: There is an instruction for doing this work. Is your e-mail address valid, if so I will send the instruction to you but whoever does the work will need to be technically skilled to remove the laser assembly from the printer. Tony Tony, I work for a school and they have the link block on how to fix the red printing problem. Can you please send me the PDF file to my school email? thank you so much Ummm...after more than seven years? Good luck with that. I'm still alive. Tony |
#16
|
|||
|
|||
HP Color Laser Jet 1600
On Wed, 06 Sep 2017 08:16:12 -0700, julie.turnage wrote:
On Wednesday, June 2, 2010 at 2:04:24 AM UTC-5, Tony wrote: HannaK wrote: Anybody? Any suggestion? Hanna This is not a cartridge problem since one of your cartridges works OK in another printer. There is an issue with this printer and some others that are similar with dust getting on to the laser lenses, this appears to affect magenta (red) first because the magenta lense is at the bottom of the laser array. The problem is that the laser assembly needs to be removed so that the lenses can be cleaned with compressed air or dry cotton swabs. This is a complicated job and takes quite some time. I cannot be sure this problem is what you are experiencing but I think it is. There is an instruction for doing this work. Is your e-mail address valid, if so I will send the instruction to you but whoever does the work will need to be technically skilled to remove the laser assembly from the printer. Tony Tony, I work for a school and they have the link block on how to fix the red printing problem. Can you please send me the PDF file to my school email? thank you so much Since you're answering a very old post, I'm not sure what your actual problem is. If it's a magenta 'cast' over prinouts, then I had that on a 2600 and there was a simple fix. Tell us more. |
#17
|
|||
|
|||
HP Color Laser Jet 1600
|
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how long will color laser cartridge last (years) | tom LA Reader | Printers | 8 | October 9th 07 02:42 PM |
HP Laserjet 1600- color quality problem? | Joe | Printers | 16 | February 2nd 07 09:09 AM |
cartridge problem Minolta Color Page Pro Plus PS Colour Laser Printer | Frank | Printers | 0 | November 27th 04 05:10 PM |
HP 3500 color laser color matching problem | Tom | Printers | 2 | June 3rd 04 08:56 AM |
Color problem with HP 4600 color laser | Burt Johnson | Printers | 0 | May 7th 04 11:32 PM |