A computer components & hardware forum. HardwareBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » HardwareBanter forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Unicomp Model-M a disaster



 
 
Thread Tools Display Modes
  #21  
Old May 26th 18, 02:07 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
Mr. Man-wai Chang
external usenet poster
 
Posts: 697
Default Unicomp Model-M a disaster --RESOLVED--

On 5/24/2018 7:29 PM, Andy Burns wrote:

Could you use some of the silver(?) conductive paint to re-draw the traces?


How do you "liquidate" a dried tip of a silver pen? I got one that's
unusable.

--
@~@ Remain silent! Drink, Blink, Stretch! Live long and prosper!!
/ v \ Simplicity is Beauty!
/( _ )\ May the Force and farces be with you!
^ ^ (x86_64 Ubuntu 9.10) Linux 2.6.39.3
不借貸! 不詐騙! 不*錢! 不援交! 不打交! 不打劫! 不自殺! 不求神! 請考慮綜援
(CSSA):
http://www.swd.gov.hk/tc/index/site_...sub_addressesa
  #22  
Old May 26th 18, 02:36 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
Mr. Man-wai Chang
external usenet poster
 
Posts: 697
Default Unicomp Model-M a disaster --RESOLVED--

On 5/25/2018 3:27 AM, Paul wrote:

How do you "liquidate" a dried tip of a silver pen? I got one that's
unusable.


Look up the MSDS for the product.
https://en.wikipedia.org/wiki/Safety_data_sheet


You meant I should have just thrown it away properly?

--
@~@ Remain silent! Drink, Blink, Stretch! Live long and prosper!!
/ v \ Simplicity is Beauty!
/( _ )\ May the Force and farces be with you!
^ ^ (x86_64 Ubuntu 9.10) Linux 2.6.39.3
不借貸! 不詐騙! 不*錢! 不援交! 不打交! 不打劫! 不自殺! 不求神! 請考慮綜援
(CSSA):
http://www.swd.gov.hk/tc/index/site_...sub_addressesa
  #23  
Old May 26th 18, 06:32 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
B00ze
external usenet poster
 
Posts: 67
Default Unicomp Model-M a disaster --RESOLVED--

On 2018-05-25 01:19, Paul wrote:

B00ze wrote:
On 2018-05-24 22:29, Andy Burns wrote:

B00ze wrote:

I had used 100% alcohol to clean the traces on the
transparent plastic "membrane" earlier, trying to get better contact to
the controller board. This weekend, flipping the membrane over, I
discovered that I had totally removed some of the traces when I used
the
alcohol; so some of the traces were "cut" and will never again make
contact with the controller board. So this keyboard is toast;

Could you use some of the silver(?) conductive paint to re-draw the
traces?


Ohhh, I did not know about this. Found a "pen" of conductive paint,
ironically from MG Chemicals (the 100% Alcohol is from them.) Darn, I
have already removed a bunch of parts from the keyboard; guess I'll
have to put it all back together now.

Excellent suggestion, thanks! I will try this in maybe 2 weeks? Will
come back and let you know if it works.

Best Regards,


http://www.pckeyboard.com/mm5/mercha...uc t_code=MEM

Membrane assembly Price: $10.00


The problem is the membrane sits between the metal backplane and the
black plastic base which holds the keys. The two (metal backplane and
black plastic base) are held together by melting the black plastic
rivet-like - I cannot separate them...

Have a chat with them, see what they've got.


They have seen this thread, I am pretty sure, and are probably not
happy; they are not chatting with me anymore. But for a hundred bucks, I
expected a working USB controller; there were different bugs on two of
the controller versions I had. I expect bugs from some things, but not
from a Model M keyboard.

Regards,

--
! _\|/_ Sylvain /
! (o o) Memberavid-Suzuki-Fdn/EFF/Red+Cross/SPCA/Planetary-Society
oO-( )-Oo Error reading FAT Record. Try the skinny one (y/n)?

  #24  
Old May 26th 18, 06:48 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
B00ze
external usenet poster
 
Posts: 67
Default Unicomp Model-M a disaster --RESOLVED--

On 2018-05-26 01:32, B00ze wrote:

They have seen this thread, I am pretty sure, and are probably not
happy; they are not chatting with me anymore. But for a hundred bucks, I
expected a working USB controller; there were different bugs on two of
the controller versions I had. I expect bugs from some things, but not
from a Model M keyboard.


I got the same thing over @ TeraBytes Unlimited. I complained that their
multi-boot tool was erasing my partition tables each time I rebooted the
computer. I made a very detailed bug report and got the standard Service
Desk "It must be you, just reboot" kinda response. After 2 responses
like this I got mad, explained I was not some 10 year old kid and that
they read the bug report I made explaining exactly how to reproduce.
They fixed the bug like 2 days later, but to this day, no matter my
pleas, the support person will not talk to me anymore. They are
childish; I do not recommend them anymore.

Best Regards,

--
! _\|/_ Sylvain /
! (o o) Memberavid-Suzuki-Fdn/EFF/Red+Cross/SPCA/Planetary-Society
oO-( )-Oo He's dead Jim, that's ten this week already! -Bones

  #25  
Old May 26th 18, 07:10 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
Mr. Man-wai Chang
external usenet poster
 
Posts: 697
Default Unicomp Model-M a disaster --RESOLVED--

On 5/25/2018 4:07 AM, Paul wrote:

For some chemical compounds, they're simply solvated.
And when the solvent evaporates, you add some more
solvent and that "rejuvenates" the material and allows
you to use it.

However, if an irreversible chemical reaction happens,
you can pour all the ethanol you want on it, and it
won't be good as new.


Thanks. Irreversible chemical reaction ....

--
@~@ Remain silent! Drink, Blink, Stretch! Live long and prosper!!
/ v \ Simplicity is Beauty!
/( _ )\ May the Force and farces be with you!
^ ^ (x86_64 Ubuntu 9.10) Linux 2.6.39.3
不借貸! 不詐騙! 不*錢! 不援交! 不打交! 不打劫! 不自殺! 不求神! 請考慮綜援
(CSSA):
http://www.swd.gov.hk/tc/index/site_...sub_addressesa
  #26  
Old May 26th 18, 07:24 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
Paul[_28_]
external usenet poster
 
Posts: 1,467
Default Unicomp Model-M a disaster --RESOLVED--

B00ze wrote:
On 2018-05-25 01:19, Paul wrote:

B00ze wrote:
On 2018-05-24 22:29, Andy Burns wrote:

B00ze wrote:

I had used 100% alcohol to clean the traces on the
transparent plastic "membrane" earlier, trying to get better
contact to
the controller board. This weekend, flipping the membrane over, I
discovered that I had totally removed some of the traces when I used
the
alcohol; so some of the traces were "cut" and will never again make
contact with the controller board. So this keyboard is toast;

Could you use some of the silver(?) conductive paint to re-draw the
traces?

Ohhh, I did not know about this. Found a "pen" of conductive paint,
ironically from MG Chemicals (the 100% Alcohol is from them.) Darn, I
have already removed a bunch of parts from the keyboard; guess I'll
have to put it all back together now.

Excellent suggestion, thanks! I will try this in maybe 2 weeks? Will
come back and let you know if it works.

Best Regards,


http://www.pckeyboard.com/mm5/mercha...uc t_code=MEM


Membrane assembly Price: $10.00


The problem is the membrane sits between the metal backplane and the
black plastic base which holds the keys. The two (metal backplane and
black plastic base) are held together by melting the black plastic
rivet-like - I cannot separate them...

Have a chat with them, see what they've got.


They have seen this thread, I am pretty sure, and are probably not
happy; they are not chatting with me anymore. But for a hundred bucks, I
expected a working USB controller; there were different bugs on two of
the controller versions I had. I expect bugs from some things, but not
from a Model M keyboard.

Regards,


I have a membrane keyboard (now retired) and the membranes
are welded to each other, but not to anything else. They fit
over alignment pegs, and that's what keeps the membrane aligned
with the key array.

It made it very easy to clean. After a coffee spill, just pull
the membrane pile and rinse in cold water for a while. The membranes
can be held apart while it dries, then reassemble.

How I ruined that, is removing the keycaps and cleaning underneath.
That seemed to be too much for the thing. So on my keyboard
(not the same brand as yours), the keyboard treated me really
well.

Now, if you take the $150 boat-anchor Apple keyboard, that
one when I spilled coffee on it, the thing was riveted
together, and an attempt to drill a rivet, just made it
spin around. I rinsed that for a long time, dried it for
a couple days in a gently heated airstream... and still three
keys were sticky enough to not work properly. $150.00 out
the window...

Paul
  #27  
Old May 30th 18, 06:17 AM posted to alt.comp.hardware.pc-homebuilt,alt.windows7.general,alt.comp.os.windows-10,alt.comp.periphs.keyboard
B00ze
external usenet poster
 
Posts: 67
Default Unicomp Model-M a disaster --RESOLVED--

On 2018-05-26 02:24, Paul wrote:

B00ze wrote:
On 2018-05-25 01:19, Paul wrote:

http://www.pckeyboard.com/mm5/mercha...uc t_code=MEM


Membrane assembly Price: $10.00


The problem is the membrane sits between the metal backplane and the
black plastic base which holds the keys. The two (metal backplane and
black plastic base) are held together by melting the black plastic
rivet-like - I cannot separate them...

Have a chat with them, see what they've got.


They have seen this thread, I am pretty sure, and are probably not
happy; they are not chatting with me anymore. But for a hundred bucks,
I expected a working USB controller; there were different bugs on two
of the controller versions I had. I expect bugs from some things, but
not from a Model M keyboard.

Regards,


I have a membrane keyboard (now retired) and the membranes
are welded to each other, but not to anything else. They fit
over alignment pegs, and that's what keeps the membrane aligned
with the key array.

It made it very easy to clean. After a coffee spill, just pull
the membrane pile and rinse in cold water for a while. The membranes
can be held apart while it dries, then reassemble.


I'll have a look at it again, maybe I can pull it out without separating
the keyboard and the backplane - there must be a trick, if UniComp sells
the membrane separately. I would ask them what the tick is, but since
they're not really talking to me anymore... They did send me a foam pad,
free of charge, when I told them about my problem (or when they saw my
post here,) so they still want to do the right thing; I'm pretty happy
with the service I got from them.

How I ruined that, is removing the keycaps and cleaning underneath.
That seemed to be too much for the thing. So on my keyboard
(not the same brand as yours), the keyboard treated me really
well.

Now, if you take the $150 boat-anchor Apple keyboard, that
one when I spilled coffee on it, the thing was riveted
together, and an attempt to drill a rivet, just made it
spin around. I rinsed that for a long time, dried it for
a couple days in a gently heated airstream... and still three
keys were sticky enough to not work properly. $150.00 out
the window...


See, using water on a keyboard is possible, lol, but make sure to dry
those blucking springs properly, or they will rust! ;-)

Best Regards,

--
! _\|/_ Sylvain /
! (o o) Memberavid-Suzuki-Fdn/EFF/Red+Cross/SPCA/Planetary-Society
oO-( )-Oo Does it bother ya that doctors call what they do a practice?

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why 2200+ & 2800+ in both model 8 & model 10 Sempron? Michael Brown Overclocking AMD Processors 3 September 27th 04 07:07 AM
Why 2200+ & 2800+ in both model 8 & model 10 Sempron? Michael Brown General 2 September 27th 04 05:40 AM
Why 2200+ & 2800+ in both model 8 & model 10 Sempron? [email protected] Overclocking AMD Processors 0 September 14th 04 12:46 AM
Why 2200+ & 2800+ in both model 8 & model 10 Sempron? [email protected] Homebuilt PC's 0 September 14th 04 12:46 AM
Why 2200+ & 2800+ in both model 8 & model 10 Sempron? [email protected] General 0 September 14th 04 12:46 AM


All times are GMT +1. The time now is 06:04 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2004-2024 HardwareBanter.
The comments are property of their posters.