Lun WWN on HDS arrays

I have a HDS 9200 and HDS 9960 arrays.I have created few luns on both
of
them and have added the host access for the luns on both the arrays.On
the host side I need to find out the lun wwn for the luns I have
created
on both the systems.The management interface of both the arrays does
not
display the LUN WWN which I just created.
Is there a way to find out the LUN WWN from the host side.Is there a
tool available for finding the LUN WWN.
Any suggestions/tricks will be appreciated.

The tool depends on the HBA on the host. If it is Qlogic use Sansurfer, if
emulex use HBAanywhere etc.. The tools are available for download from HBA
vendor.

"Milind Koli" wrote in message
. com...
I have a HDS 9200 and HDS 9960 arrays.I have created few luns on both
of
them and have added the host access for the luns on both the arrays.On
the host side I need to find out the lun wwn for the luns I have
created
on both the systems.The management interface of both the arrays does
not
display the LUN WWN which I just created.
Is there a way to find out the LUN WWN from the host side.Is there a
tool available for finding the LUN WWN.
Any suggestions/tricks will be appreciated.

I am using emulex HBA , from HBAanywhere I can see the port wwn on both
the arrays and the port wwn of the host.I can see the luns which I have
created but they show up as LUN 0 ,LUN 1, LUN 2 and so on.If I select a
particular LUN the right hand side of the hbanywhere shows the lun
attributes as follows

LUN Details :1
Hiearchical Lun : 0000 0001 0000 0000


"scsisam" wrote in message
news:juUzb.304631$9E1.1542199@attbi_s52...
The tool depends on the HBA on the host. If it is Qlogic use Sansurfer,
if
emulex use HBAanywhere etc.. The tools are available for download from HBA
vendor.

"Milind Koli" wrote in message
. com...
I have a HDS 9200 and HDS 9960 arrays.I have created few luns on both
of
them and have added the host access for the luns on both the arrays.On
the host side I need to find out the lun wwn for the luns I have
created
on both the systems.The management interface of both the arrays does
not
display the LUN WWN which I just created.
Is there a way to find out the LUN WWN from the host side.Is there a
tool available for finding the LUN WWN.
Any suggestions/tricks will be appreciated.